H81 Pro BTC R2.0** BIOS settings - MOBO RESET

[r3lentleSs]

Can anybody help me with this problem.
So i did a MOBO reset on it. After i clickded "load optimized defaults" i had some problems booting it.


But now, i can't see my integrated GPU in device manager anymore.
I have to start up with a HDMI to one of my RX580's.

After i installed my AMD drivers, i only had 3 working in device manager, i ran the pixel patcher and there are 4  now.

So i'm getting "Code 12" not enough resources available. on 2 of them



Do i need to flash my BIOS, install drivers, change BIOS settings
Anybody who can help me ?

Thanks

[r3lentleSs]

I think i have to flash my BIOS, because it used to be blue and full screen, and now its red, and smaller then my monitors screen.
When i look up version i have the

F23A version 06/2017

When i look for the BIOS flash updates, these versions are for 2014? http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/?cat=Download&os=BIOS

[zealas]

Hi,

I believe you are correct.

The last flash version is 1.20 and is released somewhere in the 2014.

http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/?cat=Download&os=BIOS

Cheers

[r3lentleSs]

I don't think that Motherboard was even released in 2014, i think this should be 2017 if i'm not mistaken.

[Cereberus]

I don't think that Motherboard was even released in 2014, i think this should be 2017 if i'm not mistaken.

Surely there is some strange thing going on. The manual of R2.0 is first published on August 2016 but I think this motherboard uses the same Bios as R1 which was introduced in early 2014. Latest version of BIOS is from 2014  in Asrock website is 1.20 and 3.48 MB in size for Windows.

Below the link to latest BIOS.

http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/?cat=Download&os=BIOS

Link to how successfully update BIOS

http://www.asrock.com/support/BIOSUI.asp?cat=Windows8

[zealas]

I believe this is all so messed up by ASROCK.

Take a look at this.

Visit this site:
http://www.asrock.com/mb/index.asp#AllProduct and browser for H81 Pro BTC (non R2.0)

Support tab of the H81 PRO BTC.

http://www.asrock.com/mb/Intel/H81%20Pro%20BTC/index.asp

There, you would notice that Flash versions are up to 2.30 from 4/14/2016

No visit the same site and look for the MB in question H81 Pro BTC R2.0

The layout of the site that opens is way more different, and the latest bios version there is.... 1.20 from the 7/28/2014
http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/?cat=Download&os=BIOS

So yeah, I believe this is all messed up from ASRock themselves.

[r3lentleSs]

Yeh thats very confusing, since my BIOS date is from 2017, and is not even displayed in first and R2 versions.

Does anybody know why i can't see my integrated intell GPU anymore in device manager.

In BIOS is set to Auto, i'm afraid if i set it to Enabled, and hook up to it, i won't be able to log in anymore and just have a black screen .....
Or should i try this? Even with it set to Auto, i should be able to see it connected in device manager right ?

[zealas]

How did you check your bios version ?

Can you please post a picture, as I believe we are discussing different things.

[Cereberus]

Yeh thats very confusing, since my BIOS date is from 2017, and is not even displayed in first and R2 versions.

Does anybody know why i can't see my integrated intell GPU anymore in device manager.

In BIOS is set to Auto, i'm afraid if i set it to Enabled, and hook up to it, i won't be able to log in anymore and just have a black screen .....
Or should i try this? Even with it set to Auto, i should be able to see it connected in device manager right ?

Probably you have it disabled and that's the way it should be in order to not have problems and only boot from the card which you have connected through HDMI. There's no reason to enable the Intel integrated GPU, I have mine disabled in all my mining rigs after I have configured my cards for mining and there's no need to have it.

You should be able to see it in the Device Manager and if it's disabled it will have a slope red line telling you that it is disabled.

[zealas]

Cerebrus what is your BIOS version on Pro BTC R2.0

[Cereberus]

Cerebrus what is your BIOS version on Pro BTC R2.0

I only have setup this for some friends about 50 rigs of such kind. We didn't move the BIOS at all, the motherboard recognized 6 GPU-s directly without problems (RX 570 8 GB). Personally I have MSI,GIGABYTE and BIOSTAR TB250 which also I haven't had the necessity to change BIOS at all. Both motherboards worked greatly without me needing to do anything else except changing PCIEX configuration from AUTO to X1 in MSI and GIGABYTE boards and only activating MINING MODE in BIOSTAR TB250.

I think you should upgrade your BIOS to at least the version of 2016 you told me earlier if you are having problems. If you can log in then do what I have already suggested, DDU uninstall and reinstall drivers. This board which I setup 50 pcs for 2 friends of mine (who rented the space,added security cameras , made it like a real business) always recognized the RX 570 cards and some RX 580 so we finished the job within one week all rigs were ready and are running since April these ones.

Edit: Code 12 not enough resources error you should try changing PCIEX configuration from X16 or AUTO to X1

[r3lentleSs]

The reason i want to use the onboard gpu, is because the fan is screwed on the frame, so  i can't acces the HDMI port of the GPU's. Without unscrewing the fan.
I enabled onboard gpu, and it works. I'm now on my onboard GPU card. I wanted to use this one, in order to check if i'm losing hashrate with the flatscreen connected to it.
But still having lower hashrate on GPU0 like usual.

I already tried to do a DDU 5-6 times, and installed different drivers for it. I'm using the blockchain amd driver as of now.
My BIOS version i looked up in BIOS.

And it said F23A 06/2017

But the GUI looks different then when i bought the rig. The screen isn't scaled to the monitor and the colour is red. It was blue when i bought it....

I did saw Mining mode wasn't enabled ... don't know what this does ?

[r3lentleSs]

I enable 4g coding and it worked, all my devices run normal except one still runs at a lower hashrate. yesterday i managed to higher the virutual memory and it worked. But not this time.

[r3lentleSs]

If i look @ this YT video this guy is using 1.2 for his BIOS
https://www.youtube.com/watch?v=2Y442wSnEoY

[r3lentleSs]

OMG! So i actualy see in BIOS its a H110 version.

I only got a bill for mining rig level 5 and if you check online it says its a H81....
So ..... what the F
aND f23a is my latest BIOS
I was about to flash 1.2 on this MOBO