stugots2 (OP)
Full Member
 Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
 |
October 19, 2017, 11:32:02 PM |
|
I'm going insane with this Avalon guys.
no matter what I do, I get this blinking red light!!!
New MCU today, (it seemed to help some issues so it was a good buy) but the red blinking light on the Back of the Avalon will NOT GO AWAY.
the AUC flickers between red and blue (sometimes green), when I reboot it seems the AUC reboots but the Avalon itself has no change what so ever, it SEEMS like the AUC gets the command but does not communicate it to the Avalon?
I'm literally going outta my mind, can you please help me out.
ANY info would be a massive help!!!
Thanks guys
|
|
|
|
|
philipma1957
Legendary
 Online
Activity: 4340
Merit: 9036
'The right to privacy matters'
|
|
October 20, 2017, 12:29:59 AM |
|
I'm going insane with this Avalon guys.
no matter what I do, I get this blinking red light!!!
New MCU today, (it seemed to help some issues so it was a good buy) but the red blinking light on the Back of the Avalon will NOT GO AWAY.
the AUC flickers between red and blue (sometimes green), when I reboot it seems the AUC reboots but the Avalon itself has no change what so ever, it SEEMS like the AUC gets the command but does not communicate it to the Avalon?
I'm literally going outta my mind, can you please help me out.
ANY info would be a massive help!!!
Thanks guys
so lets try this. does this rasp pi-------- usb----- auc------ 5 pin wire------ avalon six work at all. what I am asking is if you put in a different avalon six does the other avalon six work? that would mean the psu and all other gear works. other possibilities the wire from the auc to the avalon six is bad you can check each pin for continuity sometimes they are bad or cross wired. you need a working avalon six to test. next what brick powers your rasp pi ? sometimes the power into the rasp pi is not enough this brick is really good https://www.amazon.com/Anker-Charger-PowerPort-PowerIQ-Foldable/dp/B071YMZ4LD/ref=sr_1_1?sometimes the usb cables suck https://www.amazon.com/Anker-3-Pack-PowerLine-Micro-USB/dp/B015MJLEUS/ref=sr_1_11? |
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 20, 2017, 01:25:32 AM |
|
Sadly its my only Avalon.
Brick is from an Amazon fire stick, if there is not enough power would that cause this issue you think? can the AUC itself be bad???
|
|
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 20, 2017, 01:18:24 PM |
|
if everything works on the Pi is that an indication that it has enough power? Keyboard, HDMI out etc?
|
|
|
|
|
|
pusttiu
|
|
October 20, 2017, 07:09:32 PM |
|
put pictures from the page with miner status.
|
|
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 20, 2017, 07:30:00 PM |
|
how do I post pics here?
|
|
|
|
|
philipma1957
Legendary
Online
Activity: 4340
Merit: 9036
'The right to privacy matters'
|
|
October 20, 2017, 07:37:58 PM
Last edit: October 20, 2017, 07:50:44 PM by philipma1957 |
|
how do I post pics here?
use imgur.com it is free. see the one below put note it will say direct link on the imgur.com web page. [i m g] https://i.imgur.com/qbHMzRO.jpg [/ i m g ] one each side note no spaces on that [ i m g ] and that [ / i m g ] and a weak brick can run the rasp pi and not run the auc cable. here is the problem weak brick ----- maybe bad auc -------- maybe bad 5pin cable to ---- avalon 6 bad daughter board ---- inside the avalon 6 bad hashing board ------- inside the avalon 6 bad psu ------- powering the avalon 6. so one of those things is wrong. weak brick easy to fix . here is the fix https://www.amazon.com/Anker-Charger-PowerPort-PowerIQ-Foldable/dp/B071YMZ4LD/ref=sr_1_3?bad five pin cable easy to test https://www.amazon.com/AstroAI-Digital-Multimeter-Voltage-Tester/dp/B01ISAMUA6/ref=sr_1_2_sspa?all the other shit are hard to test. bad auc you need a good one swap it in that is how you test. bad psu you need a good one swap it in that is how you test. bad daughter board put in a a good avalon 6 if it works and you have tested for every thing else then it is the daughter board. bad hashing board same as bad daughter board. swap a good avalon 6 in. |
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 20, 2017, 10:16:50 PM |
|
ok I have a power strip with 3.1 Amp per USB connection, tried that to power it with a different USB cable - no change
Tried a different 5 pin cable (those once where you need to plug in each of the 5 on their own lol does that make a difference?) - no change
Tried a few different USB's (not sure of ANY of their specs tho) - no change
Changing MCU the other day DID show some changes in the fact now I see more on the screen that I'll be taking a screen shot of got you guys later.
As far as Hashing board, I've tried each one plugged in by itself - no change
no idea what a daughter board is LOL
PSU is a Bitmain new one, but that does not mean it can't be an issue, I do have some HP 800's with breakout boards I'll test tonight tho
|
|
|
|
|
philipma1957
Legendary
Online
Activity: 4340
Merit: 9036
'The right to privacy matters'
|
|
October 21, 2017, 12:18:29 AM |
|
ok I have a power strip with 3.1 Amp per USB connection, tried that to power it with a different USB cable - no change
Tried a different 5 pin cable (those once where you need to plug in each of the 5 on their own lol does that make a difference?) - no change
Tried a few different USB's (not sure of ANY of their specs tho) - no change
Changing MCU the other day DID show some changes in the fact now I see more on the screen that I'll be taking a screen shot of got you guys later.
As far as Hashing board, I've tried each one plugged in by itself - no change
no idea what a daughter board is LOL
PSU is a Bitmain new one, but that does not mean it can't be an issue, I do have some HP 800's with breakout boards I'll test tonight tho
Well without a screen shot of the GUI I can’t tell you much of anything |
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 21, 2017, 01:16:16 AM |
|
|
|
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 21, 2017, 01:17:21 AM |
|
|
|
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 21, 2017, 02:55:25 PM |
|
shows 0 at first then 1
|
|
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 22, 2017, 11:23:00 AM |
|
worth noting I have tried 2 different firmwares, not much change (slight changes)
|
|
|
|
|
philipma1957
Legendary
Online
Activity: 4340
Merit: 9036
'The right to privacy matters'
|
|
October 22, 2017, 04:05:27 PM |
|
|
|
|
|
philipma1957
Legendary
Online
Activity: 4340
Merit: 9036
'The right to privacy matters'
|
|
October 22, 2017, 04:09:58 PM |
|
okay this shows me that you may have a bad daughter board. that is inside the miner itself. you plug in the 5 pin cable to the daughter board. your gui shows the rasp pi works and it shows the auc translator. it doe not show the miner. what psu do you use for the miner? let us try a different mining address try nicehash with your own btc addy or try the viabtc with my address don't run it long if it works as you would be mining for me. note this version of gui is best for trouble shooting  |
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 22, 2017, 07:13:42 PM |
|
different address same thing.
I'm using the Bitmain APW3++ (tested on my L3's to work fine)
Daughter board, you said a 5 pin connects to it? which 5 pin? I have a 4 pin that connects to the AUC (from the MCU)
|
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
October 25, 2017, 10:26:07 AM
Last edit: October 25, 2017, 05:16:17 PM by Rabinovitch |
|
OK, this thread seems to be exactly what I need. One of my AUC2 adaptors became unoperational. Even with no Avalons connected to it (I have flashed a dedicated Raspberry for debugging) the blue LED is on for 8 seconds, then off for 2 seconds and then the cycle repeats indefinitely. At Raspverry side I see this (System Log): Mon May 30 12:10:47 2016 kern.info kernel: [ 64.157736] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:10:47 2016 kern.info kernel: [ 64.164102] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:10:47 2016 kern.info kernel: [ 64.169940] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:10:47 2016 daemon.err udevd[826]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:10:47 2016 daemon.err udevd[828]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:10:55 2016 kern.info kernel: [ 71.707039] usb 1-1.3: USB disconnect, device number 4
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.016210] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.139974] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.148594] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.157638] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.163931] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:10:55 2016 kern.info kernel: [ 72.169689] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:10:55 2016 daemon.err udevd[873]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:10:55 2016 daemon.err udevd[874]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:05 2016 kern.info kernel: [ 82.306976] usb 1-1.3: USB disconnect, device number 5
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.626146] usb 1-1.3: new full-speed USB device number 6 using dwc_otg
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.749654] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.758165] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.767026] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.773250] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:06 2016 kern.info kernel: [ 82.778937] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:06 2016 daemon.err udevd[921]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:06 2016 daemon.err udevd[922]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:16 2016 kern.info kernel: [ 92.917255] usb 1-1.3: USB disconnect, device number 6
Mon May 30 12:11:16 2016 kern.info kernel: [ 93.236150] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
Mon May 30 12:11:17 2016 kern.info kernel: [ 93.359719] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:17 2016 kern.info kernel: [ 93.368175] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:17 2016 kern.info kernel: [ 93.376973] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:17 2016 kern.info kernel: [ 93.383129] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:17 2016 kern.info kernel: [ 93.388792] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:17 2016 daemon.err udevd[967]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:17 2016 daemon.err udevd[968]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.527386] usb 1-1.3: USB disconnect, device number 7
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.846146] usb 1-1.3: new full-speed USB device number 8 using dwc_otg
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.969660] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.978122] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.986921] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.993069] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:27 2016 kern.info kernel: [ 103.998723] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:27 2016 daemon.err udevd[1013]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:27 2016 daemon.err udevd[1014]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:28 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:28 2016 daemon.info dnsmasq[661]: read /etc/hosts - 1 addresses
Mon May 30 12:11:28 2016 daemon.info dnsmasq[661]: read /tmp/hosts/odhcpd - 0 addresses
Mon May 30 12:11:28 2016 daemon.info dnsmasq[661]: read /tmp/hosts/dhcp - 1 addresses
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:29 2016 daemon.warn odhcpd[518]: DHCPV6 SOLICIT IA_NA from 00010001217b8f85107b444917fe on br-lan: no addresses available
Mon May 30 12:11:37 2016 kern.info kernel: [ 114.137244] usb 1-1.3: USB disconnect, device number 8
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.456182] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.589984] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.598464] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.607259] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.613408] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:38 2016 kern.info kernel: [ 114.619082] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:38 2016 daemon.err udevd[1065]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:38 2016 daemon.err udevd[1066]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:48 2016 kern.info kernel: [ 124.757247] usb 1-1.3: USB disconnect, device number 9
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.076164] usb 1-1.3: new full-speed USB device number 10 using dwc_otg
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.199670] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.208133] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.216935] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.223095] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:48 2016 kern.info kernel: [ 125.228770] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:48 2016 daemon.err udevd[1093]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:48 2016 daemon.err udevd[1094]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.367248] usb 1-1.3: USB disconnect, device number 10
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.686154] usb 1-1.3: new full-speed USB device number 11 using dwc_otg
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.809741] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.818227] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.827056] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.833173] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:11:59 2016 kern.info kernel: [ 135.838817] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:11:59 2016 daemon.err udevd[1109]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:11:59 2016 daemon.err udevd[1110]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:12:09 2016 kern.info kernel: [ 145.977266] usb 1-1.3: USB disconnect, device number 11
Mon May 30 12:12:09 2016 kern.info kernel: [ 146.296151] usb 1-1.3: new full-speed USB device number 12 using dwc_otg
Mon May 30 12:12:10 2016 kern.info kernel: [ 146.419806] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:12:10 2016 kern.info kernel: [ 146.428318] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:12:10 2016 kern.info kernel: [ 146.437188] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:12:10 2016 kern.info kernel: [ 146.443368] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:12:10 2016 kern.info kernel: [ 146.449275] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:12:10 2016 daemon.err udevd[1125]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:12:10 2016 daemon.err udevd[1126]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:12:20 2016 kern.info kernel: [ 156.587257] usb 1-1.3: USB disconnect, device number 12
Mon May 30 12:12:20 2016 kern.info kernel: [ 156.906153] usb 1-1.3: new full-speed USB device number 13 using dwc_otg
Mon May 30 12:12:20 2016 kern.info kernel: [ 157.029746] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:12:20 2016 kern.info kernel: [ 157.038218] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:12:20 2016 kern.info kernel: [ 157.047030] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:12:20 2016 kern.info kernel: [ 157.053194] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:12:20 2016 kern.info kernel: [ 157.058860] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:12:20 2016 daemon.err udevd[1140]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:12:20 2016 daemon.err udevd[1141]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:12:30 2016 kern.info kernel: [ 167.197529] usb 1-1.3: USB disconnect, device number 13
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.516149] usb 1-1.3: new full-speed USB device number 14 using dwc_otg
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.639686] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.648148] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.656947] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.663099] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:12:31 2016 kern.info kernel: [ 167.669005] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:12:31 2016 daemon.err udevd[1164]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:12:31 2016 daemon.err udevd[1165]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:12:41 2016 kern.info kernel: [ 177.807469] usb 1-1.3: USB disconnect, device number 14
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.126150] usb 1-1.3: new full-speed USB device number 15 using dwc_otg
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.249630] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.258109] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.266951] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.273063] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:12:41 2016 kern.info kernel: [ 178.278977] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:12:42 2016 daemon.err udevd[1180]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:12:42 2016 daemon.err udevd[1181]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.427527] usb 1-1.3: USB disconnect, device number 15
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.746149] usb 1-1.3: new full-speed USB device number 16 using dwc_otg
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.869696] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.878157] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.886954] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.893103] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:12:52 2016 kern.info kernel: [ 188.898765] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:12:52 2016 daemon.err udevd[1196]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:12:52 2016 daemon.err udevd[1197]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:13:02 2016 kern.info kernel: [ 199.047532] usb 1-1.3: USB disconnect, device number 16
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.366153] usb 1-1.3: new full-speed USB device number 17 using dwc_otg
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.489638] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.498082] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.506897] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.513050] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:13:03 2016 kern.info kernel: [ 199.518705] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:13:03 2016 daemon.err udevd[1217]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:13:03 2016 daemon.err udevd[1218]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:13:13 2016 kern.info kernel: [ 209.667513] usb 1-1.3: USB disconnect, device number 17
Mon May 30 12:13:13 2016 kern.info kernel: [ 209.986152] usb 1-1.3: new full-speed USB device number 18 using dwc_otg
Mon May 30 12:13:13 2016 kern.info kernel: [ 210.109709] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:13:13 2016 kern.info kernel: [ 210.118175] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:13:13 2016 kern.info kernel: [ 210.127002] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:13:13 2016 kern.info kernel: [ 210.133148] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:13:13 2016 kern.info kernel: [ 210.138793] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:13:13 2016 daemon.err udevd[1232]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:13:13 2016 daemon.err udevd[1233]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
Mon May 30 12:13:23 2016 kern.info kernel: [ 220.287495] usb 1-1.3: USB disconnect, device number 18
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.606147] usb 1-1.3: new full-speed USB device number 19 using dwc_otg
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.729651] usb 1-1.3: New USB device found, idVendor=29f1, idProduct=33f2
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.738098] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.746901] usb 1-1.3: Product: USB2IIC Converter
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.753052] usb 1-1.3: Manufacturer: CANAAN
Mon May 30 12:13:24 2016 kern.info kernel: [ 220.758715] usb 1-1.3: SerialNumber: 20141122
Mon May 30 12:13:24 2016 daemon.err udevd[1248]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic0Aisc00ip00in01': No such file or directory
Mon May 30 12:13:24 2016 daemon.err udevd[1249]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv usb:v29F1p33F2d0100dcEFdsc02dp01ic02iscFEip00in00': No such file or directory
No matter whether it's on Raspberry 3 or older HW version (red PCB, you know...). I was trying different Raspberries, different microUSB cables with no result. I guess there's something wrong with AUC2 itself? Can I somehow fix it? I have another 2 AUC2s with no LEDs shining, I guess there will be harder (or impossible) to fix those two... But I need this one which is shining!.. |
|
|
|
stugots2 (OP)
Full Member
Offline
Activity: 224
Merit: 102
Too Many Miners Not Enough Electricity
|
|
October 25, 2017, 10:57:54 PM |
|
I have a new AUC on the way as well as new USB's and a brick.
I have replaced the MCU Also known as the daughter board.
|
|
|
|
|
|
