Solo Mining Megacoin with Antminer L3+

[xavinash4ux]

I am having a hard time trying to understand this and setting it up. I just bought an Antminer L3+ and am trying to mine Megacoin or say any scrypt Coin for that matter. I have a Megacoin Wallet installed on Windows Computer and running it in -server mode. I have a megacoin config file with these parameters:

Users\Name\AppData\Roaming\Megacoin\megacoin.conf

rpcuser=wallet address
rpcpassword=pass
rpcallowip=192.168.0.3 (This is the local ip of the computer running the wallet)
rpcallowip=192.168.0.4 (This is the ip address of my Antminer L3+)
rpcallowip=127.0.0.1
rpcport=7950
port=7951
rpckeepalive=0
server=1
daemon=1
Listen=1
gen=0
algo=scrypt

(pooler-cpuminer)
Miner bat file: minerd -a scrypt -o http://192.168.0.3:7950 -u wallet address -p x --coinbase-addr=wallet address

(Antminer L3+) pool connect setup
http://192.168.0.3:7950 -u wallet address -p x

Now just for testing purpose when i use pooler-cpuminer to see if all this connects and Mines, it does. The Miner connects to my wallet and i can see hashes. I installed the Miner on the same computer as the wallet, it works, i installed the miner on a different computer and tried to connect to the computer that has the wallet, it works, so far so good.

Now the same i insert in the Antminer L3+ configuration and start the miner , it reads as pool is Dead. It fails to connect.
What am i doing wrong
can someone please help me to understand this

[lmatrading]

Hi using www.prohashing.com you can mine scrypt and receive payment in megacoin.

[xavinash4ux]

thanx for ur reply but For that matter i can use any pool, but that not what i want. I want to Solo Mine to my wallet

[rwrayen]

thanx bro 

[belaweb2]

Good question... I would be interested too in a solution.. THX

[wavelengthsf]

You need to setup a stratum proxy for your Antminer to connect to.

Something like this - https://github.com/CryptoManiac/stratum-mining-proxy

[xavinash4ux]

On your link there r 2 download links:

Download official Windows binaries (EXE) from http[Suspicious link removed] or http[Suspicious link removed]

Link: http[Suspicious link removed] < ---   dosent work
link: http[Suspicious link removed]     < --- http://blockpg.prod1.shp.mcafee.com/blockpage/?ref=d28e5062b22e97cd7fad9849b75aa0d1

is there any other way ??

since ur talkin about a Stratum Proxy ? do u think i can use a BFGminer and use it as a proxy ?

[xavinash4ux]

I tried to use a BFGminer as a stratum proxy, i get this error:

gn94V5S5Qa4rSARNh9LXHa  Password: x
 [2017-10-22 09:22:28] Press any key to exit, or BFGMiner will try again in 15s.

 [2017-10-22 09:22:43] blktmpl error: Unrecognized block version, and not allowe
d to reduce or force it
 [2017-10-22 09:22:43] Pool 0 slow/down or URL or credentials invalid
 [2017-10-22 09:22:44] No servers were found that could be used to get work from
.
 [2017-10-22 09:22:44] Please check the details from the list below of the serve
rs you have input
 [2017-10-22 09:22:44] Most likely you have input the wrong URL, forgotten to ad
d a port, or have not set up workers
 [2017-10-22 09:22:44] Pool: 0  URL: http://192.168.0.3:7950  User: MA7xnavKLf8q
gn94V5S5Qa4rSARNh9LXHa  Password: x
 [2017-10-22 09:22:44] Press any key to exit, or BFGMiner will try again in 15s.

[igotek]

Good question... I would be interested too in a solution.. THX

I m looking for solution for it.

[wavelengthsf]

Here's another one to try:
https://github.com/npmdoc/node-npmdoc-stratum-solo

I mainly setup these things on *Nix servers, so I don't try to setup on Windows much.

[xavinash4ux]

is there a step by step guide on how i compile and/or install this on windows ?

[xavinash4ux]

can someone compile a BFGminer to run as Stratum Proxy on windows ??

i can pay ..

[TurnTable904]

Good afternoon xavinash4ux, did you happen to get this working?

I am having a hard time trying to understand this and setting it up. I just bought an Antminer L3+ and am trying to mine Megacoin or say any scrypt Coin for that matter. I have a Megacoin Wallet installed on Windows Computer and running it in -server mode. I have a megacoin config file with these parameters:

Users\Name\AppData\Roaming\Megacoin\megacoin.conf

rpcuser=wallet address
rpcpassword=pass
rpcallowip=192.168.0.3 (This is the local ip of the computer running the wallet)
rpcallowip=192.168.0.4 (This is the ip address of my Antminer L3+)
rpcallowip=127.0.0.1
rpcport=7950
port=7951
rpckeepalive=0
server=1
daemon=1
Listen=1
gen=0
algo=scrypt

(pooler-cpuminer)
Miner bat file: minerd -a scrypt -o http://192.168.0.3:7950 -u wallet address -p x --coinbase-addr=wallet address

(Antminer L3+) pool connect setup
http://192.168.0.3:7950 -u wallet address -p x

Now just for testing purpose when i use pooler-cpuminer to see if all this connects and Mines, it does. The Miner connects to my wallet and i can see hashes. I installed the Miner on the same computer as the wallet, it works, i installed the miner on a different computer and tried to connect to the computer that has the wallet, it works, so far so good.

Now the same i insert in the Antminer L3+ configuration and start the miner , it reads as pool is Dead. It fails to connect.
What am i doing wrong
can someone please help me to understand this

[goodgryphon]

I am trying the same thing, mining solo on a L3+...
using bfgminer I did some solo mining years ago but cant seam to get it to work now.
would love to know how to solo with this miner, but until then  Prohash FTW.