Should I change from ETH+SIA to ETH+DCR

[hardworker27]

Hi guys, I've been mining with 6 Rx 570 Sapphire Nitro+ 4Gb. My current hashrate is 30 Mh/s and 440 Mh/s. Should I change to mine ETH and DCR?

Thanks!

Edited: I don't care about power consumption. My PSU is 1300W.

[coiner17]

Should I change from ETH+SIA to ETH+DCR

yes

[hardworker27]

Thanks. Do you know what will my hashrates be? Which value should I set for -dcri in Claymore setting?

[juanichiloco]

For my RX 570 cards I get around 26mh/s for ETH and 700-750mh/s for DCR, I was using 29 for -dcri.

[hardworker27]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

For my RX 570 cards I get around 26mh/s for ETH and 700-750mh/s for DCR, I was using 29 for -dcri.

[patofet]

I thing that it's better ETH+SIA for the moment

[0xcosmos]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

use yiimp pool
its better than the rest
in other pool you have to hit a threshold amount like 1 dcr to receive the amount
but not with yiimp

[Marvell2]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

use yiimp pool
its better than the rest
in other pool you have to hit a threshold amount like 1 dcr to receive the amount
but not with yiimp

lbry is better than both by far

[Sev18]

Yes. It has been a time that DCR shows better profitability.

[hardworker27]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

use yiimp pool
its better than the rest
in other pool you have to hit a threshold amount like 1 dcr to receive the amount
but not with yiimp

lbry is better than both by far

Did you mean that I should mine ETH+Lbry instead?

[fapar]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

use yiimp pool
its better than the rest
in other pool you have to hit a threshold amount like 1 dcr to receive the amount
but not with yiimp

lbry is better than both by far

Did you mean that I should mine ETH+Lbry instead?

Hello!
No. He means that the payout threshold on this pool is small and you do not need to wait until 1dcr.
From http://yiimp.eu/ :
Payouts are made automatically every 3 hours for all balances above 0.01, or 0.001 on Sunday.
And this pool supporting DCR.

[juanichiloco]

Great! Thanks. So I will give it a try. Hope it will work well. By the way, which DCR pool have you been using? And are you using ethOS?

For my RX 570 cards I get around 26mh/s for ETH and 700-750mh/s for DCR, I was using 29 for -dcri.

I use SuprNova (https://dcr.suprnova.cc) for DCR, my rig is Win 10.

[hardworker27]

Thank you very much, guys! I ended up with ETH (179) and DCR (suprnova) (4300)! Pretty satisfied so far. I wish that I have had known it a month ago. SIA doesn't seem to be good.

[hardworker27]

Hi guys, I have some problem here. When I am using Suprnova pool and Claymore dual mining (with ethOs), I got high rejected share in DCR. Do you have the same problem? The effective hashrate on suprnova pool is only about 1500 - 3500 but on my rig, it says that my hashrate is 4300. My -dcri is 24.
Please advice me. Thanks.

Edit: I just switched to yiimp pool to see what will be better. Thank you guys.