freak1 (OP)
Newbie
 Offline
Activity: 47
Merit: 0
|
 |
November 04, 2017, 01:13:32 PM
Last edit: January 29, 2018, 07:50:08 PM by frodocooper |
|
Have you checked the kernal log. Use the menu at the top of that page and hit Miner Administration and check log for clues
I can't seem to find any clue. The miner is now running at 4ths 2 chains are not running 6 and 8, 7 are running. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000312] ps7-ttc #0 at f0006000, irq=43
[ 0.000619] Console: colour dummy device 80x30
[ 0.000658] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040444] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040466] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042632] CPU: Testing write buffer coherency: ok
[ 0.042990] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043052] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043272] L310 cache controller enabled
[ 0.043292] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121040] CPU1: Booted secondary processor
[ 0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211050] devtmpfs: initialized
[ 0.213472] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214713] regulator-dummy: no parameters
[ 0.223755] NET: Registered protocol family 16
[ 0.226028] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228320] cpuidle: using governor ladder
[ 0.228333] cpuidle: using governor menu
[ 0.235852] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237381] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237396] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237517] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.259462] bio: create slab <bio-0> at 0
[ 0.261079] vgaarb: loaded
[ 0.261818] SCSI subsystem initialized
[ 0.262709] usbcore: registered new interface driver usbfs
[ 0.262883] usbcore: registered new interface driver hub
[ 0.263113] usbcore: registered new device driver usb
[ 0.263650] media: Linux media interface: v0.10
[ 0.263806] Linux video capture interface: v2.00
[ 0.264056] pps_core: LinuxPPS API ver. 1 registered
[ 0.264068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264193] PTP clock support registered
[ 0.264575] EDAC MC: Ver: 3.0.0
[ 0.265634] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268636] DMA-API: preallocated 4096 debug entries
[ 0.268651] DMA-API: debugging enabled by kernel config
[ 0.268742] Switched to clocksource arm_global_timer
[ 0.290296] NET: Registered protocol family 2
[ 0.290972] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.291068] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.291227] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.291288] TCP: reno registered
[ 0.291307] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.291363] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.291639] NET: Registered protocol family 1
[ 0.292030] RPC: Registered named UNIX socket transport module.
[ 0.292043] RPC: Registered udp transport module.
[ 0.292051] RPC: Registered tcp transport module.
[ 0.292059] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.292072] PCI: CLS 0 bytes, default 64
[ 0.292536] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294623] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296088] bounce pool size: 64 pages
[ 0.296996] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.297205] msgmni has been set to 1486
[ 0.297994] io scheduler noop registered
[ 0.298007] io scheduler deadline registered
[ 0.298049] io scheduler cfq registered (default)
[ 0.307513] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307533] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433354] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.005939] console [ttyPS0] enabled
[ 1.010241] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.017870] [drm] Initialized drm 1.1.0 20060810
[ 1.035053] brd: module loaded
[ 1.044622] loop: module loaded
[ 1.054360] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.060331] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.068103] libphy: XEMACPS mii bus: probed
[ 1.072705] ------------- phy_id = 0x3625e62
[ 1.077469] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.086266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092981] ehci-pci: EHCI PCI platform driver
[ 1.100232] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.107038] usbcore: registered new interface driver usb-storage
[ 1.113925] mousedev: PS/2 mouse device common for all mice
[ 1.120064] i2c /dev entries driver
[ 1.126973] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.132495] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.138391] Xilinx Zynq CpuIdle Driver started
[ 1.143274] sdhci: Secure Digital Host Controller Interface driver
[ 1.149467] sdhci: Copyright(c) Pierre Ossman
[ 1.153737] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.160576] mmc0: no vqmmc regulator found
[ 1.164589] mmc0: no vmmc regulator found
[ 1.208764] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.219540] usbcore: registered new interface driver usbhid
[ 1.225024] usbhid: USB HID core driver
[ 1.229822] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.236093] nand: Micron MT29F2G08ABAEAWP
[ 1.240139] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.246028] Bad block table found at page 131008, version 0x01
[ 1.252261] Bad block table found at page 130944, version 0x01
[ 1.258320] 3 ofpart partitions found on MTD device pl353-nand
[ 1.264119] Creating 3 MTD partitions on "pl353-nand":
[ 1.269219] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.277273] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.284614] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.293623] TCP: cubic registered
[ 1.296856] NET: Registered protocol family 17
[ 1.301595] Registering SWP/SWPB emulation handler
[ 1.307564] regulator-dummy: disabling
[ 1.311957] UBI: attaching mtd1 to ubi0
[ 1.838475] UBI: scanning is finished
[ 1.850139] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.857192] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.863989] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.870665] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.877502] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.883512] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.890623] UBI: max/mean erase counter: 15/8, WL threshold: 4096, image sequence number: 1164351368
[ 1.899740] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.908958] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.908963] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.913011] ALSA device list:
[ 1.913015] No soundcards found.
[ 1.929451] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.994630] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.000588] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.009691] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.019580] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.024609] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0B8BADB8-48CE-47AC-8938-73B44933C21D, small LPT model
[ 2.036156] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.043132] devtmpfs: mounted
[ 2.046240] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.888346] random: dd urandom read with 0 bits of entropy available
[ 3.288763]
[ 3.288763] bcm54xx_config_init
[ 3.898766]
[ 3.898766] bcm54xx_config_init
[ 7.899614] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.905721] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 21.167628] In axi fpga driver!
[ 21.170720] request_mem_region OK!
[ 21.174090] AXI fpga dev virtual address is 0xf01fe000
[ 21.179216] *base_vir_addr = 0x8c510
[ 21.194388] In fpga mem driver!
[ 21.197502] request_mem_region OK!
[ 21.201138] fpga mem virtual address is 0xf3000000
[ 22.008188]
[ 22.008188] bcm54xx_config_init
[ 22.638084]
[ 22.638084] bcm54xx_config_init
[ 26.638546] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 26.644656] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 311.826568] random: nonblocking pool is initialized
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[3] has core num=5
Chain[5] ASIC[4] has core num=4
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[13] has core num=1
Check chain[5] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[17] has core num=14
Check chain[6] PIC fw version=0x03
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[5] has core num=1
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[23] has core num=1
Chain[7] ASIC[29] has core num=3
Chain[7] ASIC[35] has core num=3
Chain[7] ASIC[44] has core num=10
Check chain[7] PIC fw version=0x03
get PIC voltage=108 on chain[5], value=880
get PIC voltage=108 on chain[6], value=880
get PIC voltage=108 on chain[7], value=880
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-4,32,-7,0,0,0,0
chain[6] temp offset record: 62,-3,32,-7,0,0,0,0
chain[7] temp offset record: 62,-4,32,-6,0,0,0,0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
Start bmminer ...
Detect 1GB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Chain[J6] has backup chain_voltage=880
Chain[J6] test patten OK temp=75
Check chain[5] PIC fw version=0x03
Chain[J7] has backup chain_voltage=880
Chain[J7] test patten OK temp=70
Check chain[6] PIC fw version=0x03
Chain[J8] has backup chain_voltage=880
Chain[J8] test patten OK temp=71
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=108 value=880
Chain[J7] orignal chain_voltage_pic=108 value=880
Chain[J8] orignal chain_voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[3] has core num=5
Chain[J6] ASIC[4] has core num=4
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[17] has core num=14
Chain[J8] has core num in PIC
Chain[J8] ASIC[5] has core num=1
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[23] has core num=1
Chain[J8] ASIC[29] has core num=3
Chain[J8] ASIC[35] has core num=3
Chain[J8] ASIC[44] has core num=10
miner total rate=14255GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=-4
Chain:5 base freq=529
Asic[ 0]:568
Asic[ 1]:668 Asic[ 2]:700 Asic[ 3]:662 Asic[ 4]:529 Asic[ 5]:700 Asic[ 6]:662 Asic[ 7]:681 Asic[ 8]:700
Asic[ 9]:662 Asic[10]:687 Asic[11]:712 Asic[12]:662 Asic[13]:687 Asic[14]:693 Asic[15]:662 Asic[16]:687
Asic[17]:693 Asic[18]:662 Asic[19]:687 Asic[20]:662 Asic[21]:662 Asic[22]:687 Asic[23]:712 Asic[24]:662
Asic[25]:637 Asic[26]:712 Asic[27]:662 Asic[28]:687 Asic[29]:681 Asic[30]:662 Asic[31]:681 Asic[32]:693
Asic[33]:662 Asic[34]:687 Asic[35]:618 Asic[36]:662 Asic[37]:643 Asic[38]:712 Asic[39]:662 Asic[40]:687
Asic[41]:668 Asic[42]:662 Asic[43]:687 Asic[44]:687 Asic[45]:662 Asic[46]:568 Asic[47]:712 Asic[48]:662
Asic[49]:687 Asic[50]:693 Asic[51]:662 Asic[52]:693 Asic[53]:668 Asic[54]:600 Asic[55]:700 Asic[56]:668
Asic[57]:662 Asic[58]:600 Asic[59]:712 Asic[60]:668 Asic[61]:681 Asic[62]:687
Chain:5 max freq=712
Chain:5 min freq=529
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.2V
Chain:6 temp offset=-3
Chain:6 base freq=537
Asic[ 0]:606
Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:631 Asic[ 4]:656 Asic[ 5]:668 Asic[ 6]:587 Asic[ 7]:668 Asic[ 8]:668
Asic[ 9]:631 Asic[10]:668 Asic[11]:618 Asic[12]:643 Asic[13]:625 Asic[14]:668 Asic[15]:643 Asic[16]:668
Asic[17]:537 Asic[18]:606 Asic[19]:668 Asic[20]:668 Asic[21]:643 Asic[22]:631 Asic[23]:668 Asic[24]:650
Asic[25]:668 Asic[26]:587 Asic[27]:543 Asic[28]:668 Asic[29]:668 Asic[30]:650 Asic[31]:637 Asic[32]:668
Asic[33]:650 Asic[34]:668 Asic[35]:650 Asic[36]:650 Asic[37]:618 Asic[38]:668 Asic[39]:575 Asic[40]:668
Asic[41]:668 Asic[42]:650 Asic[43]:600 Asic[44]:668 Asic[45]:650 Asic[46]:656 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:612 Asic[51]:668 Asic[52]:656 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:618
Asic[57]:612 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:6 max freq=668
Chain:6 min freq=537
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=-4
Chain:7 base freq=656
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:662 Asic[ 8]:675
Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:662 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:656 Asic[24]:675
Asic[25]:675 Asic[26]:656 Asic[27]:675 Asic[28]:675 Asic[29]:656 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:656 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:656 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675
Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=656
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.2V
Chain:5 temp offset=-4
Chain:5 base freq=529
Asic[ 0]:568
Asic[ 1]:668 Asic[ 2]:675 Asic[ 3]:662 Asic[ 4]:529 Asic[ 5]:675 Asic[ 6]:662 Asic[ 7]:675 Asic[ 8]:675
Asic[ 9]:662 Asic[10]:681 Asic[11]:681 Asic[12]:662 Asic[13]:681 Asic[14]:681 Asic[15]:662 Asic[16]:681
Asic[17]:681 Asic[18]:662 Asic[19]:681 Asic[20]:662 Asic[21]:662 Asic[22]:681 Asic[23]:681 Asic[24]:662
Asic[25]:637 Asic[26]:681 Asic[27]:662 Asic[28]:681 Asic[29]:681 Asic[30]:662 Asic[31]:681 Asic[32]:681
Asic[33]:662 Asic[34]:681 Asic[35]:618 Asic[36]:662 Asic[37]:643 Asic[38]:681 Asic[39]:662 Asic[40]:681
Asic[41]:668 Asic[42]:662 Asic[43]:681 Asic[44]:681 Asic[45]:662 Asic[46]:568 Asic[47]:681 Asic[48]:662
Asic[49]:681 Asic[50]:681 Asic[51]:662 Asic[52]:681 Asic[53]:668 Asic[54]:600 Asic[55]:681 Asic[56]:668
Asic[57]:662 Asic[58]:600 Asic[59]:681 Asic[60]:668 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=529
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.2V
Chain:6 temp offset=-3
Chain:6 base freq=537
Asic[ 0]:606
Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:631 Asic[ 4]:656 Asic[ 5]:668 Asic[ 6]:587 Asic[ 7]:668 Asic[ 8]:668
Asic[ 9]:631 Asic[10]:668 Asic[11]:618 Asic[12]:643 Asic[13]:625 Asic[14]:668 Asic[15]:643 Asic[16]:668
Asic[17]:537 Asic[18]:606 Asic[19]:668 Asic[20]:668 Asic[21]:643 Asic[22]:631 Asic[23]:668 Asic[24]:650
Asic[25]:668 Asic[26]:587 Asic[27]:543 Asic[28]:668 Asic[29]:668 Asic[30]:650 Asic[31]:637 Asic[32]:668
Asic[33]:650 Asic[34]:668 Asic[35]:650 Asic[36]:650 Asic[37]:618 Asic[38]:668 Asic[39]:575 Asic[40]:668
Asic[41]:668 Asic[42]:650 Asic[43]:600 Asic[44]:668 Asic[45]:650 Asic[46]:656 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:612 Asic[51]:668 Asic[52]:656 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:618
Asic[57]:612 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:6 max freq=668
Chain:6 min freq=537
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.2V
Chain:7 temp offset=-4
Chain:7 base freq=656
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:656 Asic[24]:662
Asic[25]:662 Asic[26]:656 Asic[27]:662 Asic[28]:662 Asic[29]:656 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:656 Asic[36]:662 Asic[37]:662 Asic[38]:668 Asic[39]:668 Asic[40]:668
Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:656 Asic[45]:668 Asic[46]:668 Asic[47]:668 Asic[48]:668
Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 Asic[56]:668
Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
Chain:7 max freq=668
Chain:7 min freq=656
max freq = 681
set baud=1
Chain[J6] PIC temp offset=62,-4,32,-7,0,0,0,0
Chain[J6] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[5] chip[244] local:18 remote:20 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[124] use PIC middle temp offset=-7 typeID=55
New offset Chain[5] chip[124] local:17 remote:20 offset:26
Chain[J6] chip[124] get middle temp offset=26 typeID=55
Chain[J7] PIC temp offset=62,-3,32,-7,0,0,0,0
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[6] chip[244] local:19 remote:21 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[124] use PIC middle temp offset=-7 typeID=55
New offset Chain[6] chip[124] local:18 remote:21 offset:26
Chain[J7] chip[124] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,-4,32,-6,0,0,0,0
Chain[J8] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[7] chip[244] local:20 remote:22 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J8] chip[124] use PIC middle temp offset=-6 typeID=55
New offset Chain[7] chip[124] local:18 remote:21 offset:26
Chain[J8] chip[124] get middle temp offset=26 typeID=55
get PIC voltage=880 on chain[5], check: must be < 880
retryFlag=1 will set the voltage limited on chain[5], change voltage=880
now set pic voltage=108 on chain[5]
get PIC voltage=880 on chain[6], check: must be < 880
retryFlag=1 will set the voltage limited on chain[6], change voltage=880
now set pic voltage=108 on chain[6]
get PIC voltage=880 on chain[7], check: must be < 880
retryFlag=1 will set the voltage limited on chain[7], change voltage=880
now set pic voltage=108 on chain[7]
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
do heat board 8xPatten for 1 times
Check voltage total rate=14141
get PIC voltage=880 [108] on chain[5], check: must be < 880
get PIC voltage=880 [108] on chain[6], check: must be < 880
get PIC voltage=880 [108] on chain[7], check: must be < 880
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=898
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=910 asic[30]=912 asic[31]=912
asic[32]=911 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=908 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[23]=898
core[005]=2 core[093]=0
asic[29]=910
core[000]=7 core[089]=7
asic[32]=911
core[046]=7
asic[61]=908
core[000]=7 core[021]=7 core[042]=7 core[113]=7
freq[00]=568 freq[01]=668 freq[02]=675 freq[03]=662 freq[04]=529 freq[05]=675 freq[06]=662 freq[07]=675
freq[08]=675 freq[09]=662 freq[10]=681 freq[11]=681 freq[12]=662 freq[13]=681 freq[14]=681 freq[15]=662
freq[16]=681 freq[17]=681 freq[18]=662 freq[19]=681 freq[20]=662 freq[21]=662 freq[22]=681 freq[23]=681
freq[24]=662 freq[25]=637 freq[26]=681 freq[27]=662 freq[28]=681 freq[29]=681 freq[30]=662 freq[31]=681
freq[32]=681 freq[33]=662 freq[34]=681 freq[35]=618 freq[36]=662 freq[37]=643 freq[38]=681 freq[39]=662
freq[40]=681 freq[41]=668 freq[42]=662 freq[43]=681 freq[44]=681 freq[45]=662 freq[46]=568 freq[47]=681
freq[48]=662 freq[49]=681 freq[50]=681 freq[51]=662 freq[52]=681 freq[53]=668 freq[54]=600 freq[55]=681
freq[56]=668 freq[57]=662 freq[58]=600 freq[59]=681 freq[60]=668 freq[61]=681 freq[62]=681
total valid nonce number:57435
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27139
last_nonce_num:56245
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=911 asic[53]=911 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[52]=911
core[025]=7
asic[53]=911
core[049]=7
freq[00]=606 freq[01]=668 freq[02]=668 freq[03]=631 freq[04]=656 freq[05]=668 freq[06]=587 freq[07]=668
freq[08]=668 freq[09]=631 freq[10]=668 freq[11]=618 freq[12]=643 freq[13]=625 freq[14]=668 freq[15]=643
freq[16]=668 freq[17]=537 freq[18]=606 freq[19]=668 freq[20]=668 freq[21]=643 freq[22]=631 freq[23]=668
freq[24]=650 freq[25]=668 freq[26]=587 freq[27]=543 freq[28]=668 freq[29]=668 freq[30]=650 freq[31]=637
freq[32]=668 freq[33]=650 freq[34]=668 freq[35]=650 freq[36]=650 freq[37]=618 freq[38]=668 freq[39]=575
freq[40]=668 freq[41]=668 freq[42]=650 freq[43]=600 freq[44]=668 freq[45]=650 freq[46]=656 freq[47]=668
freq[48]=668 freq[49]=668 freq[50]=612 freq[51]=668 freq[52]=656 freq[53]=668 freq[54]=668 freq[55]=668
freq[56]=618 freq[57]=612 freq[58]=668 freq[59]=668 freq[60]=668 freq[61]=668 freq[62]=668
total valid nonce number:57454
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26484
last_nonce_num:14157
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=911 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=603 asic[43]=912 asic[44]=812 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[35]=911
core[060]=7
asic[42]=603
core[016]=7 core[018]=7 core[019]=1 core[020]=1 core[021]=2 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[076]=2 core[082]=7
asic[44]=812
core[000]=7 core[001]=5 core[011]=7 core[014]=7 core[015]=7 core[016]=7 core[017]=7 core[018]=7 core[019]=7 core[020]=7 core[021]=7 core[022]=7 core[023]=7 core[024]=7 core[025]=7 core[026]=7 core[027]=7 core[029]=7 core[033]=7 core[036]=7 core[040]=4 core[041]=7 core[042]=7 core[043]=7 core[044]=7 core[045]=5 core[046]=7 core[047]=7 core[048]=7 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=656
freq[24]=662 freq[25]=662 freq[26]=656 freq[27]=662 freq[28]=662 freq[29]=656 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=656 freq[36]=662 freq[37]=662 freq[38]=668 freq[39]=668
freq[40]=668 freq[41]=668 freq[42]=668 freq[43]=668 freq[44]=656 freq[45]=668 freq[46]=668 freq[47]=668
freq[48]=668 freq[49]=668 freq[50]=668 freq[51]=668 freq[52]=668 freq[53]=668 freq[54]=668 freq[55]=668
freq[56]=668 freq[57]=668 freq[58]=668 freq[59]=668 freq[60]=668 freq[61]=668 freq[62]=668
total valid nonce number:57046
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27008
last_nonce_num:28179
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: FAILED!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
Check voltage total rate=14141
get PIC voltage=880 [108] on chain[5], check: must be < 880
get PIC voltage=880 [108] on chain[6], check: must be < 880
get PIC voltage=880 [108] on chain[7], check: must be < 880
do open core on Chain[5]...
Done open core on Chain[5]!
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=897
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=909 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[23]=897
core[003]=7 core[005]=2 core[093]=0
asic[61]=909
core[000]=7 core[021]=7 core[113]=7
freq[00]=568 freq[01]=668 freq[02]=675 freq[03]=662 freq[04]=529 freq[05]=675 freq[06]=662 freq[07]=675
freq[08]=675 freq[09]=662 freq[10]=681 freq[11]=681 freq[12]=662 freq[13]=681 freq[14]=681 freq[15]=662
freq[16]=681 freq[17]=681 freq[18]=662 freq[19]=681 freq[20]=662 freq[21]=662 freq[22]=681 freq[23]=681
freq[24]=662 freq[25]=637 freq[26]=681 freq[27]=662 freq[28]=681 freq[29]=681 freq[30]=662 freq[31]=681
freq[32]=681 freq[33]=662 freq[34]=681 freq[35]=618 freq[36]=662 freq[37]=643 freq[38]=681 freq[39]=662
freq[40]=681 freq[41]=668 freq[42]=662 freq[43]=681 freq[44]=681 freq[45]=662 freq[46]=568 freq[47]=681
freq[48]=662 freq[49]=681 freq[50]=681 freq[51]=662 freq[52]=681 freq[53]=668 freq[54]=600 freq[55]=681
freq[56]=668 freq[57]=662 freq[58]=600 freq[59]=681 freq[60]=668 freq[61]=681 freq[62]=681
total valid nonce number:57438
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27146
last_nonce_num:57784
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=668 freq[02]=668 freq[03]=631 freq[04]=656 freq[05]=668 freq[06]=587 freq[07]=668
freq[08]=668 freq[09]=631 freq[10]=668 freq[11]=618 freq[12]=643 freq[13]=625 freq[14]=668 freq[15]=643
freq[16]=668 freq[17]=537 freq[18]=606 freq[19]=668 freq[20]=668 freq[21]=643 freq[22]=631 freq[23]=668
freq[24]=650 freq[25]=668 freq[26]=587 freq[27]=543 freq[28]=668 freq[29]=668 freq[30]=650 freq[31]=637
freq[32]=668 freq[33]=650 freq[34]=668 freq[35]=650 freq[36]=650 freq[37]=618 freq[38]=668 freq[39]=575
freq[40]=668 freq[41]=668 freq[42]=650 freq[43]=600 freq[44]=668 freq[45]=650 freq[46]=656 freq[47]=668
freq[48]=668 freq[49]=668 freq[50]=612 freq[51]=668 freq[52]=656 freq[53]=668 freq[54]=668 freq[55]=668
freq[56]=618 freq[57]=612 freq[58]=668 freq[59]=668 freq[60]=668 freq[61]=668 freq[62]=668
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26492
last_nonce_num:76731
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=604 asic[43]=912 asic[44]=848 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[42]=604
core[016]=5 core[017]=6 core[018]=7 core[019]=1 core[020]=2 core[021]=2 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[076]=6 core[082]=7
asic[44]=848
core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=656
freq[24]=662 freq[25]=662 freq[26]=656 freq[27]=662 freq[28]=662 freq[29]=656 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=656 freq[36]=662 freq[37]=662 freq[38]=668 freq[39]=668
freq[40]=668 freq[41]=668 freq[42]=668 freq[43]=668 freq[44]=656 freq[45]=668 freq[46]=668 freq[47]=668
freq[48]=668 freq[49]=668 freq[50]=668 freq[51]=668 freq[52]=668 freq[53]=668 freq[54]=668 freq[55]=668
freq[56]=668 freq[57]=668 freq[58]=668 freq[59]=668 freq[60]=668 freq[61]=668 freq[62]=668
total valid nonce number:57084
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27030
last_nonce_num:70282
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=275 total_tv_end_sys=276
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=69.9270 Asic[02]=75.7490 Asic[03]=78.5000 Asic[04]=67.8130 Asic[05]=81.4030 Asic[06]=80.4460 Asic[07]=67.7460 Asic[08]=77.3930
Asic[09]=76.3690 Asic[10]=70.3130 Asic[11]=75.8160 Asic[12]=74.6250 Asic[13]=72.1750 Asic[14]=74.1210 Asic[15]=72.3930 Asic[16]=72.1580
Asic[17]=69.7090 Asic[18]=64.2560 Asic[19]=67.1420 Asic[20]=74.8430 Asic[21]=83.3990 Asic[22]=78.5670 Asic[23]=72.7290 Asic[24]=75.8160
Asic[25]=68.0310 Asic[26]=74.8260 Asic[27]=68.2830 Asic[28]=64.3230 Asic[29]=79.2220 Asic[30]=75.2120 Asic[31]=73.5000 Asic[32]=72.1920
Asic[33]=78.1310 Asic[34]=78.4500 Asic[35]=78.2150 Asic[36]=76.5870 Asic[37]=70.4470 Asic[38]=69.2220 Asic[39]=76.1010 Asic[40]=69.1050
Asic[41]=76.3020 Asic[42]=76.4360 Asic[43]=84.0370 Asic[44]=76.2690 Asic[45]=74.0880 Asic[46]=75.4130 Asic[47]=76.4530 Asic[48]=77.1580
Asic[49]=75.4470 Asic[50]=72.1420 Asic[51]=70.5640 Asic[52]=74.0880 Asic[53]=73.5680 Asic[54]=70.3130 Asic[55]=68.3160 Asic[56]=73.1820
Asic[57]=68.5850 Asic[58]=74.9270 Asic[59]=85.7980 Asic[60]=77.2420 Asic[61]=75.1610 Asic[62]=77.2420
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=72
read failed on Chain[5] Chip[62] middle Temp old value:82
Chain[5] Chip[32] TempTypeID=55 middle offset=26
read failed, old value: Chain[5] Chip[32] local Temp=46
read failed on Chain[5] Chip[32] middle Temp old value:62
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=65
Chain[6] Chip[62] middle Temp=74
Chain[6] Chip[32] TempTypeID=55 middle offset=26
Chain[6] Chip[32] local Temp=40
Chain[6] Chip[32] middle Temp=56
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=73
read failed on Chain[7] Chip[62] middle Temp old value:82
Chain[7] Chip[32] TempTypeID=55 middle offset=26
read failed, old value: Chain[7] Chip[32] local Temp=41
read failed on Chain[7] Chip[32] middle Temp old value:60
Done read temp on Chain[7]
set FAN speed according to: temp_highest=82 temp_top1[PWM_T]=82 temp_top1[TEMP_POS_LOCAL]=73 temp_change=0 fix_fan_steps=-27
FAN PWM: 30
read_temp_func Done!
CRC error counter=0
(Moderator's note: This post was edited by frodocooper to use code tags for the log.) |
