Hi, i recently got Avalon from the distributor in US. But the freakin miner didn't want to mine. It stays at yellow light in the back, and green light in AUC3. In CGminer, the Avalon Device show nothing.
I changed 4 different psu, still no luck.
Here is what it showed in the kernel log. if anyone know what the problem is, please help.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.14 (
buildbot@build.canaan-creative.com) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50019) ) #1 SMP Sat Jun 3 05:48:25 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 16 MiB at 0x3a000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 80582ec0, node_mem_map b988e000
[ 0.000000] Normal zone: 1888 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 12 pages/cpu @b984e000 s17984 r8192 d22976 u49152
[ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
[ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0xfdfb5236 smsc95xx.macaddr=B8:27:EB:FB:52:36 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 935496K/966656K available (3951K kernel code, 126K rwdata, 1416K rodata, 220K init, 368K bss, 14776K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80546060 (5369 kB)
[ 0.000000] .init : 0x80547000 - 0x8057e000 ( 220 kB)
[ 0.000000] .data : 0x8057e000 - 0x8059daac ( 127 kB)
[ 0.000000] .bss : 0x8059daac - 0x805f9bac ( 369 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000025] Switching to timer-based delay loop, resolution 52ns
[ 0.000202] Console: colour dummy device 80x30
[ 0.000843] console [tty1] enabled
[ 0.000885] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000938] pid_max: default: 32768 minimum: 301
[ 0.001069] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001102] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001782] CPU: Testing write buffer coherency: ok
[ 0.002209] CPU0: update cpu_capacity 1024
[ 0.002238] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002267] [bcm2709_smp_prepare_cpus] enter
[ 0.002373] Setting up static identity map for 0x8240 - 0x8298
[ 0.003562] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.003860] [bcm2709_secondary_init] enter cpu:1
[ 0.003894] CPU1: update cpu_capacity 1024
[ 0.003900] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004205] [bcm2709_boot_secondary] cpu:2 started (0) 16
[ 0.004409] [bcm2709_secondary_init] enter cpu:2
[ 0.004428] CPU2: update cpu_capacity 1024
[ 0.004434] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.004714] [bcm2709_boot_secondary] cpu:3 started (0) 15
[ 0.004894] [bcm2709_secondary_init] enter cpu:3
[ 0.004913] CPU3: update cpu_capacity 1024
[ 0.004919] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.004970] Brought up 4 CPUs
[ 0.005061] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005087] CPU: All CPU(s) started in HYP mode.
[ 0.005110] CPU: Virtualization extensions available.
[ 0.013402] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.013710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014385] pinctrl core: initialized pinctrl subsystem
[ 0.014868] NET: Registered protocol family 16
[ 0.019932] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.049926] cpuidle: using governor ladder
[ 0.079945] cpuidle: using governor menu
[ 0.085812] bcm2709: Mini UART enabled
[ 0.085922] Serial: AMBA PL011 UART driver
[ 0.086065] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.086247] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.140835] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[ 0.142207] SCSI subsystem initialized
[ 0.142393] usbcore: registered new interface driver usbfs
[ 0.142490] usbcore: registered new interface driver hub
[ 0.142573] usbcore: registered new device driver usb
[ 0.150025] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-02 16:01
[ 0.177020] clocksource: Switched to clocksource arch_sys_counter
[ 0.184719] NET: Registered protocol family 2
[ 0.185277] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.185411] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.185617] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.185721] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.185786] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.185994] NET: Registered protocol family 1
[ 0.187693] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.196223] io scheduler noop registered
[ 0.196262] io scheduler deadline registered
[ 0.196318] io scheduler cfq registered (default)
[ 0.198751] BCM2708FB: allocated DMA memory fa400000
[ 0.198797] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 0.203546] Console: switching to colour frame buffer device 82x26
[ 0.207719] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.209737] console [ttyS0] disabled
[ 0.211010] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 31250000) is a 16550
[ 0.808358] console [ttyS0] enabled
[ 0.813760] vc-cma: Videocore CMA driver
[ 0.818977] vc-cma: vc_cma_base = 0x00000000
[ 0.824954] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.831604] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.838346] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 0.860009] brd: module loaded
[ 0.871007] loop: module loaded
[ 0.876044] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
[ 0.885713] usbcore: registered new interface driver smsc95xx
[ 0.892718] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.099915] Core Release: 2.80a
[ 1.104240] Setting default values for core params
[ 1.110290] Finished setting default values for core params
[ 1.317442] Using Buffer DMA mode
[ 1.321967] Periodic Transfer Interrupt Enhancement - disabled
[ 1.329080] Multiprocessor Interrupt Enhancement - disabled
[ 1.335908] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.341480] Dedicated Tx FIFOs mode
[ 1.346365] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
[ 1.358694] FIQ FSM acceleration enabled for :
[ 1.358694] Non-periodic Split Transactions
[ 1.358694] Periodic Split Transactions
[ 1.358694] High-Speed Isochronous Endpoints
[ 1.358694] Interrupt/Control Split Transaction hack enabled
[ 1.387351] dwc_otg: Microframe scheduler enabled
[ 1.387401] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80299718
[ 1.394620] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
[ 1.402199] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
[ 1.409527] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.409557] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.409587] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 1.409630] Init: Port Power? op_state=1
[ 1.409632] Init: Power Port (0)
[ 1.409821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.409830] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.409837] usb usb1: Product: DWC OTG Controller
[ 1.409843] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
[ 1.409850] usb usb1: SerialNumber: 3f980000.usb
[ 1.410447] hub 1-0:1.0: USB hub found
[ 1.410481] hub 1-0:1.0: 1 port detected
[ 1.410990] dwc_otg: FIQ enabled
[ 1.410993] dwc_otg: NAK holdoff enabled
[ 1.410996] dwc_otg: FIQ split-transaction FSM enabled
[ 1.411027] Module dwc_common_port init
[ 1.485766] usbcore: registered new interface driver uas
[ 1.492319] usbcore: registered new interface driver usb-storage
[ 1.499588] mousedev: PS/2 mouse device common for all mice
[ 1.506996] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 1.515227] sdhci: Secure Digital Host Controller Interface driver
[ 1.522614] sdhci: Copyright(c) Pierre Ossman
[ 1.528378] sdhost: log_buf @ ba413000 (fa413000)
[ 1.607039] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.607168] Indeed it is in host mode hprt0 = 00021501
[ 1.622240] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.629288] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.687117] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.695725] NET: Registered protocol family 10
[ 1.702254] NET: Registered protocol family 17
[ 1.707901] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.722962] 8021q: 802.1Q VLAN Support v1.8
[ 1.728826] Registering SWP/SWPB emulation handler
[ 1.735525] vc-sm: Videocore shared memory driver
[ 1.741482] [vc_sm_connected_init]: start
[ 1.747152] [vc_sm_connected_init]: end - returning 0
[ 1.753458] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.765187] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 1.776923] of_cfs_init
[ 1.776977] mmc0: new high speed SDHC card at address aaaa
[ 1.777473] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 1.793171] mmcblk0: p1 p2
[ 1.793189] of_cfs_init: OK
[ 1.797036] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.797153] Indeed it is in host mode hprt0 = 00001101
[ 1.824910] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 1.835122] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.843705] Freeing unused kernel memory: 220K (80547000 - 8057e000)
[ 1.858172] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.866565] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.874939] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.884495] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.933427] init: Console is alive
[ 1.938308] init: - watchdog -
[ 1.988639] mmc1: new high speed SDIO card at address 0001
[ 2.007270] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.015249] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.024322] hub 1-1:1.0: USB hub found
[ 2.029356] hub 1-1:1.0: 5 ports detected
[ 2.084020] init: - preinit -
[ 2.307042] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.427246] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.435404] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.446709] smsc95xx v1.0.4
[ 2.450859] random: procd urandom read with 62 bits of entropy available
[ 2.509907] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:fb:52:36
[ 5.216729] mount_root: mounting /dev/root
[ 5.222562] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[ 5.239132] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 5.277329] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.302682] procd: - early -
[ 5.307076] procd: - watchdog -
[ 5.924050] procd: - ubus -
[ 5.984003] procd: - init -
[ 6.752836] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.769402] i2c /dev entries driver
[ 6.779997] bcm2708_i2c 3f205000.i2c: BSC0 Controller at 0x3f205000 (irq 83) (baudrate 100000)
[ 6.791773] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
[ 6.811596] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.835048] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
[ 6.845475] Backport generated by backports.git backports-20160216-0-ge3c56e4
[ 6.855914] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.867443] nf_conntrack version 0.5.0 (14876 buckets, 59504 max)
[ 6.980190] usbcore: registered new interface driver usbhid
[ 6.987259] usbhid: USB HID core driver
[ 6.998366] xt_time: kernel timezone is -0000
[ 7.021721] PPP generic driver version 2.4.2
[ 7.028214] NET: Registered protocol family 24
[ 7.144438] random: nonblocking pool is initialized
[ 7.156595] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ 7.194786] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
[ 7.209381] usbcore: registered new interface driver brcmfmac
[ 9.486390] udevd[672]: starting version 3.2
[ 9.495923] udevd[672]: specified group 'tty' unknown
[ 9.502844] udevd[672]: specified group 'dialout' unknown
[ 9.509861] udevd[672]: specified group 'kmem' unknown
[ 9.516530] udevd[672]: specified group 'input' unknown
[ 9.523263] udevd[672]: specified group 'video' unknown
[ 9.530136] udevd[672]: specified group 'lp' unknown
[ 9.536511] udevd[672]: specified group 'disk' unknown
[ 9.542970] udevd[672]: specified group 'cdrom' unknown
[ 9.549557] udevd[672]: specified group 'tape' unknown
[ 9.573471] udevd[673]: starting eudev-3.2
[ 9.698940] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 9.709418] device eth0 entered promiscuous mode
[ 9.718285] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 10.002883] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.966771] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
