[ANN] Onex Cash / Masternodes 5000 (50% Reward) / ASIC Resistance / [NEOSCRYPT]

[nickitenko]

dev's last activity 13december. Is it OK?

[1714654620]

1714654620

[1714654620]

1714654620

[tek-g]

Block explorer down 5 days now.

[nickitenko]

I think the developer is not interested in his product, most likely the coin will soon die

[Andrey123]

Hey.
How to set up a master node on Windows 10?
My ISP has a dynamic IP address .... and what is Ubunta?

[~Money~]

Hey.
How to set up a master node on Windows 10?
My ISP has a dynamic IP address .... and what is Ubunta?

You need to purchase a static ip, mn needs to be known on network and ubuntu is a gui version of linux, seems like windows with much more capability

[cryptomaxsun]

Hey.
How to set up a master node on Windows 10?
My ISP has a dynamic IP address .... and what is Ubunta?

You need to purchase a static ip, mn needs to be known on network and ubuntu is a gui version of linux, seems like windows with much more capability

VPS- server will work best.

[bulwarkpool]

ONEX COIN

~

The coin was added on our pool, happy mining!

http://bulwarkpool.com

Based on Yiimp pool (No Registration Needed)
Fee  : 0.0%

Code:

Code:

-o stratum+tcp://eu.bulwarkpool.com:4233 -u <WALLET_ADDRESS> -p c=ONEX

Code:

-o stratum+tcp://us.bulwarkpool.com:4233 -u <WALLET_ADDRESS> -p c=ONEX

Code:

-o stratum+tcp://asia.bulwarkpool.com:4233 -u <WALLET_ADDRESS> -p c=ONEX

Code:

Code:

Pool host: eu.bulwarkpool.com
Pool port: 4233
Pool user: Your_Wallet_Address
Pool pass: c=ONEX
Algorithm: [b]X11[/b]

[/size]

[kkemp102294]

Hey.
How to set up a master node on Windows 10?
My ISP has a dynamic IP address .... and what is Ubunta?

Here is some instructions on how to setup a master node: https://bitcointalk.org/index.php?topic=2393150.msg25218658#msg25218658

[Loosecheck]

where master node guide for window?

+1 we need guide!!!!

[Hi-JacKeR]

Guys, this coin allready dead.
Don't waste your time!

[lemonyak]

Guys, this coin allready dead.
Don't waste your time!

Is not this money paid?

[Chetty]

Hi guys, I installed the masternode but when I start it I get the status PRE_ENABLED and after 40 minutes it becomes EXPIRED. What's the problem?

[tibahoni]

Hi guys, I installed the masternode but when I start it I get the status PRE_ENABLED and after 40 minutes it becomes EXPIRED. What's the problem?

You Must My Friend  re-install Your Wallet Again After The Back Up  

[Chetty]

Do I understand correctly? Delete everything from the OnexCore dir and run the wallet again with the old wallet.dat file

[xx63245613]

Why are there so many people here to talk about? It looks very common.

[palgin]

Hi, I invite everyone to participate in new Neoscrypt miner betatest, most hashing improvements are for GDDR5X memory cards (1080/1080Ti-seires), but 1060 and 1070 experience speedup too.

Miner thread: https://bitcointalk.org/index.php?topic=2565979

GitHub page : https://github.com/palginpav/hsrminer

Thanks to everyone who wants to participate!

[kevarms]

Hi, I invite everyone to participate in new Neoscrypt miner betatest, most hashing improvements are for GDDR5X memory cards (1080/1080Ti-seires), but 1060 and 1070 experience speedup too.

Miner thread: https://bitcointalk.org/index.php?topic=2565979

GitHub page : https://github.com/palginpav/hsrminer

Thanks to everyone who wants to participate!

No AMD support? 

[kevarms]

Masternode Setup
This guide will help you to setup a masternode on an Ubuntu 16.04 64bit Server.

Basic Requirements
5.000 ONEX
A main wallet (We’ll use the Windows Wallet v.1.1.2)
Masternode Server (Ubuntu 16.04 that will be online 24/7)
(OPTIONAL) WinSCP (https://winscp.net/eng/download.php)
(Please keep in mind that for security reasons you’re gonna need a single IP for each masternode you’re planning to run)
Getting the Ubuntu Server ready

Updating
Once you’ve logged in for the first time on your new Ubuntu Server you should always update your package lists from the repositories.

Code:

apt-get update

Installing needed libraries

The Onex-Daemon needs some basic libraries in order to run.
Let’s get them:

Code:

sudo apt-get install git automake build-essential libtool autotools-dev autoconf pkg-config libssl-dev libboost-all-dev software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev libminiupnpc-dev

Compiling the Daemon

Now it’s time to decide. Do you want to compile the daemon on your own, or do you want to download a precompiled daemon which will save some time?
We are going to talk about both.
OPTION ONE - Compiling on your own

Getting the newest version

Code:

git clone https://github.com/onexcash/onex-core.git

OR updating an existing onex

Code:

cd onex-core && git pull

Compiling the source

Code:

cd onex-core
./autogen.sh
./configure
make

Once your ONEX source is compiled without an error you can skip the following step “(OPTIONAL) Getting precompiled daemon”.
OPTION TWO - Precompiled files

If you don’t want to compile the source by yourself,  this is where you’ll go.

Code:

mkdir onex
cd onex
wget https://onex.cash/wallets/linux/onexd && chmod +x onexd
wget https://onex.cash/wallets/linux/onex-cli && chmod +x onex-cli

Running the Daemon the first time

Running the Daemon the first time will help us to create the basic folder structure and to check for errors.
IMPORTANT: The path is different for the ones who compiled on there own and the ones who downloaded the precompiled files!

Code:

/root/onex-core/src/onexd

(For the ones who compiled on their own server)

Code:

/root/onex/onexd

(For the ones who downloaded the precompiled daemon)

Editing the configs

Once you’ve run the Daemon for the first time - it will show you to setup a rpcuser and rpcpassword and close right after it - it has also created the folder structure where the blockchain and all config files are going to be.
We want to edit those files now slightly but we’ll come back later for the finishing touch.
The easiest way is to use WinSCP to edit your conf-files. If you are somehow don’t want to use WinSCP follow these steps:

Code:

apt-get install nano

Nano is a great console-based text-editor.

Code:

nano /root/.onexcore/onex.conf

Let’s open the onex.conf located in the .onexcore folder. This folder was created by the daemon on the first run!
What goes inside the config?

Your configuration files gets read by the ONEX-Daemon on startup.
There are a lot of things you can tweak, add or remove.

This is just a basic configuration for a simple masternode setup:

Code:

rpcuser={CHOOSE A RANDOM USER}
rpcpassword={CHOOSE A RANDOM PASSWORD}
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
externalip={YOUR SERVER IP}
bind={YOUR SERVER IP}

Save the config and let’s get over to the main-wallet.

Main wallet setup

In order to get the masternodes to run, we need to send 5.000 ONEX to an address we are just going to create.
We use a system called “Cold-Wallet”. This system is meant for better security because actually your masternode won’t have any access to your wallet.
Masternode Priv-Key

As you might’ve saw we need a “masternodeprivkey” - this key indicates a private key that is used by your wallet and the masternode.
In your Wallet-App go to: Tools -> Debugconsole.

Code:

masternode genkey

This will generate a private key - We need to add that key to the “masternodeprivkey”-field in the onex.conf on the Ubuntu server.
Generate a wallet-address

Each masternode needs it’s own address. We are going to send 5.000 ONEX to this address later.

Code:

getaccountaddress mn1

You can change mn1 to whatever you want to name your masternode.
Save the address you’ve just generated for the next step.
Sending 5.000 ONEX to the address

Let’s send 5.000 ONEX to that address. Yes - make sure this is only 5.000 ONEX. No less, no more.)
Wait for the transaction to have at least 15 confirmations before continuing.
I won’t get further into sending ONEX.
Getting the transaction

For our local masternode-config we need to get the transaction id and following number.
Back into the main-wallets debugconsole enter:

Code:

masternode outputs

It will display a list of valid masternode transactions. If this is your first masternode there will be only one for sure.
The list contains a longer number (transaction ID) and a following number.
Save both of these somewhere for the next step.
Local configs

We are almost there. Just a few lines to edit and we are able to start our masternode. onex.conf

Open your local onex.conf (Find it or use the “Edit config file” in the onex-qt client under “Tools”).
Make it look similiar to this:

Code:

rpcuser={CHOOSE A RANDOM USER}
rpcpassword={CHOOSE A RANDOM PASSWORD}
rpcallowip=127.0.0.1
masternode.conf

Open your local masternode.conf (You can find it or open it like you’ve opened the onex.conf via the Wallet-App)
{YOURMASTERNODENAME} {YOURIP}:18291 {YOURMASTERNODEPRIVKEY} {TRANSACTIONID} {TRANSACTION_FOLLOW_ID}
which should result in something like that:
mn1 1.2.3.4:18291 3Xgpvye4AEMviBBvybpbUJorN4NCs8Hqdznovo3Q2nWQxX2BkMY 897dd18650799053b912ec0d0ab685c5527cff24666c66f944fb20624e05fe5f 1

Starting everything up

After editing all the files locally we need to get back to our Ubuntu Server and enter the “masternodeprivkey” and for sure start the daemon.
As I’ve told you in the step where we’ve created the privkey, we need to add that to the onex.conf on our server. Get back to that step if you are not sure how to open the config.
Starting the daemon on the Ubuntu server

After adding the “masternodeprivkey” in we want to start the daemon.

Code:

/root/onex/onexd -daemon

OR

Code:

/root/onex-core/src/onexd -daemon

(If you’ve compiled on your own)
The daemon should start minimzed. You’ll only see a message like this:
ONEX server starting
Remote-Start the masternode

Once you’ve restarted your Wallet-App get back into the debugconsole and enter:
masternode start-alias {YOURMASTERNODENAME}
Congratulations. You’ve successfully setup a masternode on your own.

anyone get the daemon to work.... can't seem to get mine up

[Chetty]

Daemon does not work. You must make it from the source code.

[chenjl84]

Really sorry for the shitty management of signature bounty, posted and kept signature for second week, changed wednesday and dev didn't pay. He wants two week with price of one... Fuck onex...

I was in the same boat. Had the signature for a while, was around number 30 registered, never paid, complained, still never paid, took signature off for a campaign that pays every week. Done with this shit coin.. DEV has mandatory 15 posts in this forum per week on top of signature in order to get airdrop.. hes trying to create community interest for coin artificially by having people post a certain amount.. bad

Do you have any signature activities in accordance with the requirements of the developer, and ask if anyone else who has participated in this signature has received a reward.