I need some help with my miner

[Caddy]

Hello,

I'm new to mining so please try to be objective about my request, thank you in advance.

This is are my miner specs:

• mb: h110-d3a Gigabyte
• cpu: Celeron G3930 2.9 Ghz
• ram: Kingston HyperX 2x4GB
• hdd: SSD Sandisk 120 gb
• 4x Sapphire Nitro+ Radeon RX 580 8 GB (bios moded)
• 4x 120mm fans (on the miner chasis)
• PSU1: Evga SuperNova 750 G2L
• PSU2: Corsair 750 Tx

* The GPU Bios I use it's from http://1stminingrig.com/best-bios-rom-sapphire-nitro-rx-580-8gb-oc-hynix-memory-30-mhs/
- the V1 version: https://mega.nz/#!ZxQEwCDC!vSgnjdHRE0rpk7L8I95WQXPRkrT0lbrTDOcn6iQWRoI

I run the SimpleMining OS on it from a 3.0 USB 16 GB Transcend Stick

This are my underclock settings I made on SimpleMining

• Core MHz: 1200
• Memore MHz: 2200
• Core Undervolting: 850
• Powerstage: 1
• Target Temperature C: 70
• Minimum Fan Speed: 60

This is my reported Hash Speed while mining Ethereum and Decred (dual mine) with claymore-eth-v10.0

• ETH: 122.55 MH/s
• Decred: 3676.62 MH/s

With this temperature/fan speeds:

Code:

50 56 53 58 ℃
60 60 60 60 %

Random mining message from Console:

Code:

ETH: 11/14/17-23:03:59 - New job from asia1.ethermine.org:4444
ETH - Total Speed: 121.777 Mh/s, Total Shares: 2167, Rejected: 0, Time: 20:00
ETH: GPU0 30.539 Mh/s, GPU1 30.484 Mh/s, GPU2 30.329 Mh/s, GPU3 30.425 Mh/s
DCR - Total Speed: 3653.301 Mh/s, Total Shares: 5263, Rejected: 125
DCR: GPU0 916.160 Mh/s, GPU1 914.514 Mh/s, GPU2 909.882 Mh/s, GPU3 912.745 Mh/s
ETH: 11/14/17-23:04:03 - New job from asia1.ethermine.org:4444
ETH - Total Speed: 121.992 Mh/s, Total Shares: 2167, Rejected: 0, Time: 20:00
ETH: GPU0 30.439 Mh/s, GPU1 30.475 Mh/s, GPU2 30.492 Mh/s, GPU3 30.585 Mh/s
DCR - Total Speed: 3659.747 Mh/s, Total Shares: 5263, Rejected: 125
DCR: GPU0 913.169 Mh/s, GPU1 914.255 Mh/s, GPU2 914.774 Mh/s, GPU3 917.549 Mh/s
GPU0 t=50C fan=60%, GPU1 t=56C fan=60%, GPU2 t=53C fan=60%, GPU3 t=58C fan=60%
ETH: 11/14/17-23:04:14 - New job from asia1.ethermine.org:4444
ETH - Total Speed: 121.720 Mh/s, Total Shares: 2167, Rejected: 0, Time: 20:00
ETH: GPU0 30.435 Mh/s, GPU1 30.414 Mh/s, GPU2 30.482 Mh/s, GPU3 30.388 Mh/s
DCR - Total Speed: 3651.586 Mh/s, Total Shares: 5263, Rejected: 125
DCR: GPU0 913.063 Mh/s, GPU1 912.416 Mh/s, GPU2 914.467 Mh/s, GPU3 911.640 Mh/s
ETH: 11/14/17-23:04:21 - New job from asia1.ethermine.org:4444
ETH - Total Speed: 122.114 Mh/s, Total Shares: 2167, Rejected: 0, Time: 20:00
ETH: GPU0 30.510 Mh/s, GPU1 30.458 Mh/s, GPU2 30.619 Mh/s, GPU3 30.527 Mh/s
DCR - Total Speed: 3663.431 Mh/s, Total Shares: 5263, Rejected: 125
DCR: GPU0 915.295 Mh/s, GPU1 913.747 Mh/s, GPU2 918.573 Mh/s, GPU3 915.816 Mh/s

My total Wattage consume it is 850 W for this mining rig (I got the values from the meter I have on the plug)

My Questions are
Are this reports ok?
Isn't the Wattage consume too high? Or its fine for the speed/GPU I'm using?

Thanks

[1714843453]

1714843453

[javorcro]

This is ok report,consumption electiric energy is relative ok for this configuration

[bouldou]

That's really good report ! 850W for 4*GPU dual mining is really good in my opinion

And your ETH Hashrate is good too : best hashrate I've heard on RX580 are around 31MHs, but you're really close to it

If your rig is stable (and that's the most important part), just stick to this and be happy

I have a question/suggestion though : if I were you, I would not use a USB stick to run SimpleMiningOS from. I've had some troubles with low quality USB sticks : their lifespan seems quite low. Wouldn't it better to run it with the SSD ?

Good luck

[Caddy]

Hello,

Thank you for the answers. I'm happy the configuration and the consume its OK, I was worried it consumes too much

About the USB stick...I thought the Transcend JetFlash 810 it is a good USB but I guess I will look for something better, thank you for pointing that out...

Thank you again for taking the time and answering to my question