[ANN] [FAUCETHUB] Highest paying CPU mining

[svirby]

I dont really understand why it should matter if it is coinhive or not?

[tomos81]

I dont really understand why it should matter if it is coinhive or not?

agree with you. most important is, that pays and pays higher (and faster) than CH

[tomos81]

based on yesterday income, i raised earnings by 20%
it means, 0.12 DOGE / 10k shares for the miners.
form now, there is no doubt, this is the highest paying miner interface!

[tomos81]

i made some optimizations, a little bit better design.
also made bigger support for lower speed CPUs (from now, difficulty is 100 = big advantage against Coinhive).

you only need to reload your mining page with ctrl+f5.

PS: 140 DOGE already paid, come on and join highest paying mining!

[tomos81]

Happy to see more and more miners trusts to my highest paying mining simple website
Here is my offer/deal:

post to this thread your faucethub payment proof (img )  + your DOGE address, i will credit your account with 10 DOGE!
Offer is for first 3 posts

[Darnblood]

Happy to see more and more miners trusts to my highest paying mining simple website
Here is my offer/deal:

post to this thread your faucethub payment proof (img )  + your DOGE address, i will credit your account with 10 DOGE!
Offer is for first 3 posts

Paying: https://prnt.sc/hgffyx
https://prnt.sc/hgfh0h

Running it on 3 devices. My Laptop 18 Hashes/s, Smartphone 7 Hashes/s and a Raspberry pi 3 oc 5 Hashes/s

Good mining site, simple, adfree.

Doge Adress: D9M46j1w5MehaPquS7UWJ46jD9sA48kri4

[tomos81]

Happy to see more and more miners trusts to my highest paying mining simple website
Here is my offer/deal:

post to this thread your faucethub payment proof (img )  + your DOGE address, i will credit your account with 10 DOGE!
Offer is for first 3 posts

Paying: https://prnt.sc/hgffyx
https://prnt.sc/hgfh0h

Running it on 3 devices. My Laptop 18 Hashes/s, Smartphone 7 Hashes/s and a Raspberry pi 3 oc 5 Hashes/s

Good mining site, simple, adfree.

Doge Adress: D9M46j1w5MehaPquS7UWJ46jD9sA48kri4

added 10 DOGE to your balance, so you will get payout every round for 84 rounds

[tomos81]

i am undating the server , please dont mine until this message is on

[Darnblood]

Happy to see more and more miners trusts to my highest paying mining simple website
Here is my offer/deal:

post to this thread your faucethub payment proof (img )  + your DOGE address, i will credit your account with 10 DOGE!
Offer is for first 3 posts

Paying: https://prnt.sc/hgffyx
https://prnt.sc/hgfh0h

Running it on 3 devices. My Laptop 18 Hashes/s, Smartphone 7 Hashes/s and a Raspberry pi 3 oc 5 Hashes/s

Good mining site, simple, adfree.

Doge Adress: D9M46j1w5MehaPquS7UWJ46jD9sA48kri4

added 10 DOGE to your balance, so you will get payout every round for 84 rounds

I received the 10 DOGE, Thank you very much!

[hroub]

It means you must have DOGE address linked to your Faucethub account.

Sorry if its a stupid question, but do you mean it has to be a FaucetHub generated deposit address, or my non-faucethub address linked with my faucethub?

Currently minig on 3 devices with a total of 66Hashes/s on my doge address linked to faucethub (not faucethub generated address) and don't see any results yet...

[zuzoovn]

Doge address D5bnEir6CgfC25jnJFzxb2ZayHgRzQd9zL
Payment proof:

https://upnhanh.mobi//thumbs/3c7ccbe33aa8ceea18a1cc75194f9c65fbc37e0f.jpg

Many Thanks

[hroub]

Is this not working anymore?

Until last night I was mining on 3 devices

48 hashes/s on MacBook, 8 on iPhone and 8 on iPad...

today when the page http://tomostasks.website/index.php?u=D6uFz5Rn3gFoU97ntsfhFfhJn8qsWJ1SUm says hashing speed: 0 Hashes/s

I tried refreshing page, restaring browser and restaring device, still all three devices say 0 hashes/s 

Still haven't managed to get a payment in my faucethub 

Am I doing something wrong or is the service down?

My Doge addy is: D6uFz5Rn3gFoU97ntsfhFfhJn8qsWJ1SUm

[tomos81]

Is this not working anymore?

Until last night I was mining on 3 devices

48 hashes/s on MacBook, 8 on iPhone and 8 on iPad...

today when the page http://tomostasks.website/index.php?u=D6uFz5Rn3gFoU97ntsfhFfhJn8qsWJ1SUm says hashing speed: 0 Hashes/s

I tried refreshing page, restaring browser and restaring device, still all three devices say 0 hashes/s 

Still haven't managed to get a payment in my faucethub 

Am I doing something wrong or is the service down?

My Doge addy is: D6uFz5Rn3gFoU97ntsfhFfhJn8qsWJ1SUm

hi i will open better/faster more stable version soon (1-2 days max) ..
i had bug here and it was vulnerable so stopped it for security reasons

[shaw1]

When you bring out your new version, if you can provide some sort of a REST API, I'll use this on my faucet...

[tomos81]

When you bring out your new version, if you can provide some sort of a REST API, I'll use this on my faucet...

yes exactly on that i am working at the moment
also my web will be available to webpages, also for cpu miners also (also for nvidia gpu miners)

[UpsilonTrooper]

I've disabled Adblocker and other stuff but the hashes are stuck to 0, I even tried on a mobile. Same issue. Any fix?

[tomos81]

I've disabled Adblocker and other stuff but the hashes are stuck to 0, I even tried on a mobile. Same issue. Any fix?

hi, i am working on the update, will be released later today..
i got some security problems + creating API, so for now, mining is disabled here

[tomos81]

I updated the website, there is only info how to mine with my system..
The most effective and highest paying CPU mining.

[UpsilonTrooper]

I updated the website, there is only info how to mine with my system..
The most effective and highest paying CPU mining.

Still shows 0 hashes for me, also this was initially paying us in doge right? Anyway to continue getting paid in doge?

[tomos81]

I updated the website, there is only info how to mine with my system..
The most effective and highest paying CPU mining.

Still shows 0 hashes for me, also this was initially paying us in doge right? Anyway to continue getting paid in doge?

try to follow the instructions, it's a 1 minute setup. If instructions not showing, ctrl+f5 and refresh the page