[KGC] The future is krugercoin and the future is now! [Official Launch]

[UniMatrixZ]

This isn't working.
New wallet says total blocks ~528k, last block 14 July 2013.
Then it starts to download the blockchain, says it is 420755 blocks to go.
Then the next second it jumps to 630455 blocks to go.


So sorry guys I'm leaving to mine something else, I'll be back when you have corrected things.

[1715082136]

1715082136

[pielstic]

Old wallet sync 1 199 999,don't receive new coin,
New wallet don't sync after 1200000 (start.bat don't sync)
My modified krugercoin.conf and new wallet don't sync
My modified krugercoin.conf and run new wallet the start.bat,now full sync and received coins .eu pool.

My krugercoin.conf


listen=1
daemon=1
server=1
rpcuser=Z915mykrugeradress
rpcpassword=mypass
rpcallowip=127.0.0.1
rpcport=8772
addnode=192.186.133.74
addnode=84.22.96.60
addnode=117.27.250.149
addnode=212.83.191.197
addnode=54.204.36.33
addnode=78.42.83.245
addnode=188.6.38.12
addnode=81.224.140.225
addnode=84.104.23.68
addnode=196.215.28.70

Thanks eu.pool

[UniMatrixZ]

Old wallet sync 1 199 999,don't receive new coin,
New wallet don't sync after 1200000 (start.bat don't sync)
My modified krugercoin.conf and new wallet don't sync
My modified krugercoin.conf and run new wallet the start.bat,now full sync and received coins .eu pool.

My krugercoin.conf


listen=1
daemon=1
server=1
rpcuser=Z915mykrugeradress
rpcpassword=mypass
rpcallowip=127.0.0.1
rpcport=8772
addnode=192.186.133.74
addnode=84.22.96.60
addnode=117.27.250.149
addnode=212.83.191.197
addnode=54.204.36.33
addnode=78.42.83.245
addnode=188.6.38.12
addnode=81.224.140.225
addnode=84.104.23.68
addnode=196.215.28.70

Thanks eu.pool

Ahh thank you this seems to be working.

But will we be able to send coins to exchanges, probably not until they update their wallets.

[UniMatrixZ]

Maybe some dev could talk to Cryptsy and tell them to update their wallet? 

[MinersPoolEU]

Maybe some dev could talk to Cryptsy and tell them to update their wallet? 

I created a ticket this morning. Waiting for answer.
But I don't know if Nibiru has already created his ticket

[UniMatrixZ]

Maybe some dev could talk to Cryptsy and tell them to update their wallet? 

I created a ticket this morning. Waiting for answer.
But I don't know if Nibiru has already created his ticket

Great, I just pointed my rigs back to the kruger pool
I have also just sent Cryptsy a ticket, let's hope they answer.

Good night.

[almightyruler]

I just restarted my Krugercoin client and noted peers with plausible heights (all connected within about a minute of each other)

212.83.191.197 - 1121301
78.42.83.245 - 1119999
84.104.23.68 - 1127091
94.181.11.189 - 1127091
178.149.224.172 - 1121336
82.111.88.34 - 1121287

So besides the one peer stuck at 1119999 there seem to be at least 4 different chains.

[JohnnyCrypto]

I just restarted my Krugercoin client and noted peers with plausible heights (all connected within about a minute of each

other)

212.83.191.197 - 1121301
78.42.83.245 - 1119999
84.104.23.68 - 1127091
94.181.11.189 - 1127091
178.149.224.172 - 1121336
82.111.88.34 - 1121287

So besides the one peer stuck at 1119999 there seem to be at least 4 different chains.

Yeah, there are multiple chains going on here.

Guys stop adding all the nodes people are posting here. They are mostly no good. It's causing chain forks.

I think i may have a solution to the sync problem. Just follow these instructions.

The main chain is on krugercoin.miners-pool.eu, since 99% of the hash rate is coming from there.

So the first thing to do is delete all the addnodes in your .conf file.

Then delete blk0001.dat, blkindex.dat & peers.dat.

Then go to your "kruger-kgw" folder, where your krugercoin-qt is located, and edit the "start.bat" file to look like this.

Code:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

Then run the "start.bat" file to start your wallet. It should sync to the right chain. And will not connect to any other nodes that are on the wrong chain with the "-connect=".

These 3 nodes are on the right chain as of right now. Plus as i said, krugercoin.miners-pool.eu basically is the whole chain.

Have fun, hope this fixes peoples problems.  

[paladin281978]

I just restarted my Krugercoin client and noted peers with plausible heights (all connected within about a minute of each

other)

212.83.191.197 - 1121301
78.42.83.245 - 1119999
84.104.23.68 - 1127091
94.181.11.189 - 1127091
178.149.224.172 - 1121336
82.111.88.34 - 1121287

So besides the one peer stuck at 1119999 there seem to be at least 4 different chains.

Yeah, there are multiple chains going on here.

Guys stop adding all the nodes people are posting here. They are mostly no good. It's causing chain forks.

I think i may have a solution to the sync problem. Just follow these instructions.

The main chain is on krugercoin.miners-pool.eu, since 99% of the hash rate is coming from there.

So the first thing to do is delete all the addnodes in your .conf file.

Then delete blk0001.dat, blkindex.dat & peers.dat.

Then go to your "kruger-kgw" folder, where your krugercoin-qt is located, and edit the "start.bat" file to look like this.

Code:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

Then run the "start.bat" file to start your wallet. It should sync to the right chain. And will not connect to any other nodes that are on the wrong chain with the "-connect=".

These 3 nodes are on the right chain as of right now. Plus as i said, krugercoin.miners-pool.eu basically is the whole chain.

Have fun, hope this fixes peoples problems. 

my "start.bat" file contains that:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -addnode=192.186.133.74 -addnode=84.22.96.60 -addnode=117.27.250.149

and I added addnode=212.83.191.197    ( = krugercoin.miners-pool.eu)

and chain coincides with krugercoin.miners-pool.eu

Why node in file "start.bat" different?

[JohnnyCrypto]

I just restarted my Krugercoin client and noted peers with plausible heights (all connected within about a minute of each

other)

212.83.191.197 - 1121301
78.42.83.245 - 1119999
84.104.23.68 - 1127091
94.181.11.189 - 1127091
178.149.224.172 - 1121336
82.111.88.34 - 1121287

So besides the one peer stuck at 1119999 there seem to be at least 4 different chains.

Yeah, there are multiple chains going on here.

Guys stop adding all the nodes people are posting here. They are mostly no good. It's causing chain forks.

I think i may have a solution to the sync problem. Just follow these instructions.

The main chain is on krugercoin.miners-pool.eu, since 99% of the hash rate is coming from there.

So the first thing to do is delete all the addnodes in your .conf file.

Then delete blk0001.dat, blkindex.dat & peers.dat.

Then go to your "kruger-kgw" folder, where your krugercoin-qt is located, and edit the "start.bat" file to look like this.

Code:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

Then run the "start.bat" file to start your wallet. It should sync to the right chain. And will not connect to any other nodes that are on the wrong chain with the "-connect=".

These 3 nodes are on the right chain as of right now. Plus as i said, krugercoin.miners-pool.eu basically is the whole chain.

Have fun, hope this fixes peoples problems. 

my "start.bat" file contains that:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -addnode=192.186.133.74 -addnode=84.22.96.60 -addnode=117.27.250.149

and I added addnode=212.83.191.197    ( = krugercoin.miners-pool.eu)

and chain coincides with krugercoin.miners-pool.eu

Why node in file "start.bat" different?

Some nodes are on the wrong chain. So only using nodes with the correct block height, by forcing the client to only sync with nodes on the correct chain with "-connect=" instead of  "-addnode=" will hopefully alleviate these problems.

[paladin281978]

JohnnyCrypto

write for all the correct .conf file please

[JohnnyCrypto]

paladin281978

Just use your usual .conf file without the addnodes for now. Once everybody is on the right chain, we can go back to adding other nodes. 

[UniMatrixZ]

I just restarted my Krugercoin client and noted peers with plausible heights (all connected within about a minute of each

other)

212.83.191.197 - 1121301
78.42.83.245 - 1119999
84.104.23.68 - 1127091
94.181.11.189 - 1127091
178.149.224.172 - 1121336
82.111.88.34 - 1121287

So besides the one peer stuck at 1119999 there seem to be at least 4 different chains.

Yeah, there are multiple chains going on here.

Guys stop adding all the nodes people are posting here. They are mostly no good. It's causing chain forks.

I think i may have a solution to the sync problem. Just follow these instructions.

The main chain is on krugercoin.miners-pool.eu, since 99% of the hash rate is coming from there.

So the first thing to do is delete all the addnodes in your .conf file.

Then delete blk0001.dat, blkindex.dat & peers.dat.

Then go to your "kruger-kgw" folder, where your krugercoin-qt is located, and edit the "start.bat" file to look like this.

Code:

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

Then run the "start.bat" file to start your wallet. It should sync to the right chain. And will not connect to any other nodes that are on the wrong chain with the "-connect=".

These 3 nodes are on the right chain as of right now. Plus as i said, krugercoin.miners-pool.eu basically is the whole chain.

Have fun, hope this fixes peoples problems.  

Thanks for the info, I have done this and it's syncing fine.

[UniMatrixZ]

Nibiru:

PLEASE add this to start.bat to all the wallets so we can make sure everybody is on the same chain.

rem *************************************
rem *** Start Krugercoin with nodes   ***
rem *** This will start krugercoin    ***
rem *** with some base nodes to start ***
rem *** pulling the KGC chain in.     ***
rem *************************************

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

Sent him a PM also, we need to sort this out so we can start to trade with krugercoins again

[UniMatrixZ]

How to get on the right chain (winwallet):

1. Go to your appdata folder and find Krugercoin folder, go into the Krugercoin folder.
2. Start notepad
3. Write the following:

listen=1
daemon=1
server=1
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=8772

Choose save as krugercoin.conf (not krugercoin.conf.txt)

Or if you already have a krugercoin.conf file, edit it to only contain the lines above.

4. Delete the following files in the Krugercoin folder

blk0001.dat
blkindex.dat
peers.dat

5. Now go to your krugercoin-qt folder and find start.bat, open it in notepad
6. Delete this line:

krugercoin-qt.exe -addnode=192.186.133.74 -addnode=84.22.96.60 -addnode=117.27.250.149

and replace with the following line

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

7. Save the file
8. IMPORTANT! Start your wallet using start.bat(otherwise it will sync using the wrong nodes)and let it sync, may take awhile.
9. Done  

[paladin281978]

UniMatrixZ

good job 

[UniMatrixZ]

Thank you!

MinersPoolEU:

Maybe you could put a link on your pools frontpage to this forum, so people can get on the right chain?

[JohnnyCrypto]

How to get on the right chain (winwallet):

1. Go to your appdata folder and find Krugercoin folder, go into the Krugercoin folder.
2. Start notepad
3. Write the following:

listen=1
daemon=1
server=1
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=8772

Choose save as krugercoin.conf (not krugercoin.conf.txt)

Or if you already have a krugercoin.conf file, edit it to only contain the lines above.

4. Delete the following files in the Krugercoin folder

blk0001.dat
blkindex.dat
peers.dat

5. Now go to your krugercoin-qt folder and find start.bat, open it in notepad
6. Delete this line:

krugercoin-qt.exe -addnode=192.186.133.74 -addnode=84.22.96.60 -addnode=117.27.250.149

and replace with the following line

krugercoin-qt.exe -connect=84.104.23.68 -connect=94.181.11.189 -connect=krugercoin.miners-pool.eu

7. Save the file
8. Start your wallet and let it sync, may take awhile.
9. Done  

Haha, thanks.

But don't forget, you have to run "start.bat" not just the wallet directly. Or it will sync using wrong chain nodes via UPNP. 

[UniMatrixZ]

Thank you, edited my post  

Just got an answer from Cryptsy, told them to ONLY use the three correct nodes when they update their wallet.
So we will see how it goes.
Let's hope the devs make a new wallet update with a new start.bat file soon.

[paladin281978]

cryptsy updated wallet?