|
mackminer (OP)
|
 |
June 30, 2011, 06:30:33 PM |
|
Hi,
I have three cards running at 100% fan speed at the moment and the temps are 68 max. I still haven't overclocked them.
Any info greatly appreciated - thanks.
|
1BFf3Whvj118A5akc5fHhfLLwxYduMmq1d
|
|
|
|
|
|
Whoever mines the block which ends up containing your transaction will get its fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
gw4tt
|
|
June 30, 2011, 06:34:44 PM |
|
You don't really have to run them 100% all the time. Just keep temps below 80C or so. (6990's run hot... Seems like you're generally not hurting anything till you go above 90C)
|
|
|
|
|
Oldminer
Legendary
 Offline
Activity: 1022
Merit: 1001
|
|
June 30, 2011, 07:16:41 PM |
|
Yea I have 2 x 6950's and have set fan speeds using Afterburner. One seems to run at a higher temp than the other so atm 1 runs @ 61c @ 71% fan speed and the other @ 71c @ 91% fan speed. I could lower the temps further but then you have the noise issue to contend with. I think this setup of not quite full fan speed and < 71c temp to be a happy medium. At these settings my cards arent being hammered and they can run all day like this (they could run @ even higher temps safely) w/o fear of component failure.
|
|
|
|
Wildvest
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 30, 2011, 07:25:29 PM |
|
i'm running 12 x 6990 at the absolute edge in overclocking mode (power, temp) - they are all running at 100% 24/7 - unfortunately i have to clock down if the ambient temp is rising, but i use a script for that - a few pic: http://imgur.com/a/usqDL |
|
|
|
|
|
gochk
|
|
June 30, 2011, 07:46:24 PM |
|
i'm running 12 x 6990 at the absolute edge in overclocking mode (power, temp) - they are all running at 100% 24/7 - unfortunately i have to clock down if the ambient temp is rising, but i use a script for that - a few pic: http://imgur.com/a/usqDLI love this pic https://i.imgur.com/fevHc.jpgWould you care to share your script(s) or how you show temperatures and the last picture where it shows V (is that volts?)? |
|
|
|
|
|
mackminer (OP)
|
|
June 30, 2011, 09:59:32 PM
Last edit: June 30, 2011, 10:32:46 PM by forumuse84 |
|
i'm running 12 x 6990 at the absolute edge in overclocking mode (power, temp) - they are all running at 100% 24/7 - unfortunately i have to clock down if the ambient temp is rising, but i use a script for that - a few pic: http://imgur.com/a/usqDLSorted. |
1BFf3Whvj118A5akc5fHhfLLwxYduMmq1d
|
|
|
|
bcforum
|
|
June 30, 2011, 10:45:44 PM |
|
Hi,
I have three cards running at 100% fan speed at the moment and the temps are 68 max. I still haven't overclocked them.
Any info greatly appreciated - thanks.
Yes, run the fans at 100%. You'll get more lifetime from the cards with lower temperatures, but the fans might wear out sooner. |
If you found this post useful, feel free to share the wealth: 1E35gTBmJzPNJ3v72DX4wu4YtvHTWqNRbM
|
|
|
Wildvest
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 30, 2011, 11:00:04 PM |
|
i'm running 12 x 6990 at the absolute edge in overclocking mode (power, temp) - they are all running at 100% 24/7 - unfortunately i have to clock down if the ambient temp is rising, but i use a script for that - a few pic: http://imgur.com/a/usqDLI love this pic https://i.imgur.com/fevHc.jpgWould you care to share your script(s) or how you show temperatures and the last picture where it shows V (is that volts?)? sorry for the OT the bash script for the autom. clock control (based on temp) is from the forum here, but i don't have the thread in mind, you may try the forum search function the lower terminal windows are the output of lm-sensors (took me 2 days to fix all the kernel and driver stuff :-( ) - important for me is that temp sensor, it give me some estimate about the ambient (server room) temperature - the A/C is a old lady already  the V - yes that are Volts, since there is nowhere a hwmon for the 12V, i use the 3.3 V reference as a guessing - in idle it is around 3.3, below 3.10 the motherboard or the cards crashing frequently, so it is a good guess ;-) |
|
|
|
|
|
gochk
|
|
July 01, 2011, 03:51:35 AM |
|
I think my card's temp is an issue. But I have no idea how to fix it. I currently only have 1 6970 and when it's mining it's at 90-92 C range. But when I stop mining, it gradually drops to low 50s. Reading this thread, it seems like 61 C and 71 C is the range 6990 should be in. 6970 is even less hash power than 6990; under that logic, should the temps be lower?
But how do I fix the issue? For Win system, people use MSI Afterburner to control the GPU fan; but what does Ubuntu (Linux) use? I looked at MSI Afterburner and it doesn't look like they have a version for Ubuntu. So I youtube and found out people use LM-SENSORS. I haven't tried setting that up; but the whole clip looks weird.
Anyways, enough of my ranting. As usual, I welcome any and every advise.
|
|
|
|
|
PalmerEldritch
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 01, 2011, 03:58:08 AM |
|
i'm running 12 x 6990 at the absolute edge in overclocking mode (power, temp) - they are all running at 100% 24/7 - unfortunately i have to clock down if the ambient temp is rising, but i use a script for that - a few pic: http://imgur.com/a/usqDLWhy are you running 12 6990s may I ask? Got a need for speed? |
|
|
|
|
|
