[ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN

[dashasaratova]

я вce пoнимaю нo вce чтo я мaйнилa нa тoм жe bsod oттyдa дeньги cняли, нa кoшeлeк нe пpишли дeньги, чтo зa cкaм? пpoшлa yжe нeдeля

[1715116306]

1715116306

[1715116306]

1715116306

[1715116306]

1715116306

[1715116306]

1715116306

[1715116306]

1715116306

[DIXxX]

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

[ekze]

я вce пoнимaю нo вce чтo я мaйнилa нa тoм жe bsod oттyдa дeньги cняли, нa кoшeлeк нe пpишли дeньги, чтo зa cкaм? пpoшлa yжe нeдeля

Ceть BWK paздeлилacь нa бoльшoe кoличecтвo фopкoв. Ha нacтoящий мoмeнт, мaйнить Bulwark нe peкoмeндyeтcя, вce мoнeты, дoбытыe зa пocлeдниe 3 дня мoгyт быть пoтepяны. Кaк мepa пpeдocтopoжнocти, мы ocтaнoвили выплaты, пoкa пpoблeмы нe бyдyт peшeны. Oбpaтитe внимaниe, чтo кoшeлeк BWK нa Cryptopia тaкжe пepeвeдeн в cocтoяниe "тex. paбoты" и нe пpинимaeт дeпoзиты или вывoд. Cлeдитe зa нaшими нoвocтями нa https://t.me/bsodnews и https://discord.gg/JME5hej

[kaneo]

So I am new to Bulwark...downloaded windows wallet which is not updating was stuck at several different blocks yesterday now its 95115 18h behind I left it whole day but no joy. I wanted to mine this but guess its not a sure thing. Any tips or its wait time? I'm 18h behind, block 95115

Welcome to the team, friend!

Try doing the following:

Windows key + R

%appdata% and press enter

Bulwark folder

Delete everything except wallet.dat and masternode.conf

Run Bulwark-qt again

If you have further problems, I cover this at the end of the video here (5 minutes long)

https://www.bitchute.com/video/OBW8jBoEHj3l/

Hi,

thank you for your help I did it and it got sync no issues...can you please recommend a decent pool I read lots of ppl having issues getting their mined coins from the pools due to the network split or what is it...I ain't that tech savvy but I am willing to try this coin. So any advice is welcomed .... bosd not paying out as several others as I see

https://pool.masterhash.us/

Give this a go!

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

Hope to see you again soon.

[Jazek]

So I am new to Bulwark...downloaded windows wallet which is not updating was stuck at several different blocks yesterday now its 95115 18h behind I left it whole day but no joy. I wanted to mine this but guess its not a sure thing. Any tips or its wait time? I'm 18h behind, block 95115

Welcome to the team, friend!

Try doing the following:

Windows key + R

%appdata% and press enter

Bulwark folder

Delete everything except wallet.dat and masternode.conf

Run Bulwark-qt again

If you have further problems, I cover this at the end of the video here (5 minutes long)

https://www.bitchute.com/video/OBW8jBoEHj3l/

Hi,

thank you for your help I did it and it got sync no issues...can you please recommend a decent pool I read lots of ppl having issues getting their mined coins from the pools due to the network split or what is it...I ain't that tech savvy but I am willing to try this coin. So any advice is welcomed .... bosd not paying out as several others as I see

https://pool.masterhash.us/

Give this a go!

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

Hope to see you again soon.

wrong chain, your pool is like 500 blocks back from the explorer.

[BWK LyGhT1337]

So I am new to Bulwark...downloaded windows wallet which is not updating was stuck at several different blocks yesterday now its 95115 18h behind I left it whole day but no joy. I wanted to mine this but guess its not a sure thing. Any tips or its wait time? I'm 18h behind, block 95115

Welcome to the team, friend!

Try doing the following:

Windows key + R

%appdata% and press enter

Bulwark folder

Delete everything except wallet.dat and masternode.conf

Run Bulwark-qt again

If you have further problems, I cover this at the end of the video here (5 minutes long)

https://www.bitchute.com/video/OBW8jBoEHj3l/

Hi,

thank you for your help I did it and it got sync no issues...can you please recommend a decent pool I read lots of ppl having issues getting their mined coins from the pools due to the network split or what is it...I ain't that tech savvy but I am willing to try this coin. So any advice is welcomed .... bosd not paying out as several others as I see

https://pool.masterhash.us/

Give this a go!

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

Hope to see you again soon.

wrong chain, your pool is like 500 blocks back from the explorer.

As said multiple times:

The Official Alpha Bulwark Explorer is NOT updated to Wallet Version 1.2.3 and it is still unknown if it is the right chain. So it's useless to determate the right chain by comparing the pool block height with the explorer.

[kaneo]

So I am new to Bulwark...downloaded windows wallet which is not updating was stuck at several different blocks yesterday now its 95115 18h behind I left it whole day but no joy. I wanted to mine this but guess its not a sure thing. Any tips or its wait time? I'm 18h behind, block 95115

Welcome to the team, friend!

Try doing the following:

Windows key + R

%appdata% and press enter

Bulwark folder

Delete everything except wallet.dat and masternode.conf

Run Bulwark-qt again

If you have further problems, I cover this at the end of the video here (5 minutes long)

https://www.bitchute.com/video/OBW8jBoEHj3l/

Hi,

thank you for your help I did it and it got sync no issues...can you please recommend a decent pool I read lots of ppl having issues getting their mined coins from the pools due to the network split or what is it...I ain't that tech savvy but I am willing to try this coin. So any advice is welcomed .... bosd not paying out as several others as I see

https://pool.masterhash.us/

Give this a go!

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

Hope to see you again soon.

wrong chain, your pool is like 500 blocks back from the explorer.

It's also the only pool currently suggested by us (the BWK team), if you are going to be mining at all.

[Zikkson]

Suggested pool is one with 0 blocks while poolr on wrong chain takes all blocks? Looks like both of them are at wrong chain.

[dashasaratova]

pool http://yiimp.poolofd32th.club scum pool, if you work on your wallet

Note: the Minimum payout amount for this wallet is 100000000000 BWK
ahahahahaha

and the wallet of the exchange


if it is not Scam some people do not follow what they have written, and if you believe what is written then you will never be paid what you earned, because you have to earn this amount of coins 5 million years))))))))) all))))))

[raoulsergia]

Is official explorer correct in working?

I have successfully gotten my 2 NVIDIA based miners hashing both running ethOS but having issues with the AMD rig running sgminer.

Has anyone sorted the config files for this setup running sgminer, AMD cards on ethOS?

[ganzocrypt]

how can we check if a pool is on the right chain 1.2.3 ?

[DIXxX]

So I am new to Bulwark...downloaded windows wallet which is not updating was stuck at several different blocks yesterday now its 95115 18h behind I left it whole day but no joy. I wanted to mine this but guess its not a sure thing. Any tips or its wait time? I'm 18h behind, block 95115

Welcome to the team, friend!

Try doing the following:

Windows key + R

%appdata% and press enter

Bulwark folder

Delete everything except wallet.dat and masternode.conf

Run Bulwark-qt again

If you have further problems, I cover this at the end of the video here (5 minutes long)

https://www.bitchute.com/video/OBW8jBoEHj3l/

Hi,

thank you for your help I did it and it got sync no issues...can you please recommend a decent pool I read lots of ppl having issues getting their mined coins from the pools due to the network split or what is it...I ain't that tech savvy but I am willing to try this coin. So any advice is welcomed .... bosd not paying out as several others as I see

https://pool.masterhash.us/

Give this a go!

Ok I just put half my cards on ETH half on BWK...and I am getting around 41-42 MH per card on 1070 dual. Is that ok? using same settings as for ETH

40-50 Mh/s is right for the 1070. Tho it's still not recommended to mine, since its still gambling atm ^^.

Yes I see no shares being registred even tho miner connects ok. Over 2h now and no payment registered for done work...I will wait for update and continue if gets sorted. Gl

Hope to see you again soon.

yes I used that pool my hashrate gets registered but income line remains flat...and it did over 700 shares...I am still new to mining so I could be doing it wrong for these new coins

[zositarik]

as before, true chain bsod.

[muzuca]

Hi guys, I hope this new wallet fix the problem, as I mined on bsod some days ago, before know about this chain issue, and they did the payment today and the coins didn't appeared in my 1.2.2.0 wallet, so, I'm super worried.

When the new wallet will be released?

[ganzocrypt]

Hi guys, I hope this new wallet fix the problem, as I mined on bsod some days ago, before know about this chain issue, and they did the payment today and the coins didn't appeared in my 1.2.2.0 wallet, so, I'm super worried.

When the new wallet will be released?

Hey, I had the same issue on the same pool but I restarted the wallet and let it sync and got my coins on the 1.2.2 wallet.
So give it a try.

[samaraki]

I received 3 coins from BSOD to Crypto-bridge...

9 coins from BSOD to the wallet, (sent at the same time as the exchange ones never arrived.)
300 or so coins from Poolr some to the exchange, some to wallet never arrived.
200 or so from POD32 to the exchange and to the wallet never arrived...

I really hope some more arrive, perhaps when the new wallet is out some will come, who knows.

[gradinkov]

I received 3 coins from BSOD to Crypto-bridge...

9 coins from BSOD to the wallet, (sent at the same time as the exchange ones never arrived.)
300 or so coins from Poolr some to the exchange, some to wallet never arrived.
200 or so from POD32 to the exchange and to the wallet never arrived...

I really hope some more arrive, perhaps when the new wallet is out some will come, who knows.

I'm still waiting on poolr to update their wallet, so far, zero BWK received from them.

[Gongolo]

Today I got what I mined in the past days at bsod.

[gradinkov]

Apparently 1.2.3 got tagged:

https://github.com/bulwark-crypto/Bulwark/releases/tag/1.2.3

No binaries yet.

[gradinkov]

Apparently 1.2.3 got tagged:

https://github.com/bulwark-crypto/Bulwark/releases/tag/1.2.3

No binaries yet.

BWK disappeared from Poolr altogether, let's hope that's just a sign of it being updated, and not being eradicated haha