Rx580 Monero/Cryptonight 1000 h/s

[sidzkosic]

Hi guys,
did anybody achieved 1000 h/s on rx580 on Monero/Cryptonight? I have Sapphire Pulse 4G to play with but so far I get only to 740 h/s and it seems too far to achieve.
I use XMR-STAK. Can anybody share their setup?
Thanks

[treanski]

i have some rx 580 with samsung memory that run @950hs @1150core/2100memclock. i think if i overclock the gpu more it would easily go over 1000, but the 50h/s its not worth the higher power consumption in my optionion

[cryptbro]

what kind of watts at the wall are your cards pulling? got 4 570s on the way

[treanski]

what kind of watts at the wall are your cards pulling? got 4 570s on the way

i have 10 rx580 cards that pull 1020 watts from the wall. total speed 9180

[sidzkosic]

what kind of watts at the wall are your cards pulling? got 4 570s on the way

i have 10 rx580 cards that pull 1020 watts from the wall. total speed 9180

Cool. What miner software do you use?

[Basmic]

I have also the same GPU the speed of 852 m/s. I do not believe that them it is possible without bad consequences to accelerate to 1000 m/s. Mining eth speed on the same GPU 30-31 Mh/s. This is the maximum I've ever seen. Do you still have the possibility for overclocking.

[AcrylicGuy]

On my Sapphire RX580s (Hynix) I get 850-880. The same cards with Samsung memory get 980-1000 H/s. I didn't believe it the first time I saw it, but both my Sapphire gpus with samsung are running this speed (1280/2100). I also have an MSI Gaming X+ gpu with Samsung memory that gets the same 1000 H/s speed. Stable with no issues.

On Ethereum, the same cards are running 31.0-31.2 while the Hynix cards are running 31.8 all day long without too much effort.

The Samsung memory seems to be great for CryptoNight, while the Hynix likes Ethash better.

[MiningDoc]

I have my rx570's (elpida) running at 735 - 740 H/s using 88w at the wall.  running at 1268 gpu/1750 mem.  Bios mod undervolted to 900mv using 1500 straps.  Using the bios mod I made for Eth mining, to lazy to reflash to stock bios to play with it.

[tg88]

Which miner are you using?

I'm using claymore 10.2 but I'm not getting such good results so.

I use -h 800 Is it too low?
 

[Ryuh]

On my Sapphire RX580s (Hynix) I get 850-880. The same cards with Samsung memory get 980-1000 H/s. I didn't believe it the first time I saw it, but both my Sapphire gpus with samsung are running this speed (1280/2100). I also have an MSI Gaming X+ gpu with Samsung memory that gets the same 1000 H/s speed. Stable with no issues.

On Ethereum, the same cards are running 31.0-31.2 while the Hynix cards are running 31.8 all day long without too much effort.

The Samsung memory seems to be great for CryptoNight, while the Hynix likes Ethash better.

I also have Sapphire RX580s (Hynix), but i can only manage 800 h/s. Can you please share what miner do you use, and what is the overclock parameters?

[treanski]

claymores miner is the slowest on cryptonight +highest power consumption+ Fee...dont understand why somebody using it, xmr-stak and sgminer are the best for polaris gpus.

& you have such bad speed because your bios mod sucks

[tg88]

claymores miner is the slowest on cryptonight +highest power consumption+ Fee...dont understand why somebody using it, xmr-stak and sgminer are the best for polaris gpus.

& you have such bad speed because your bios mod sucks

is it possible to set voltages directly in xmr-stak or sgminer?

Thanks for the trouble!

[treanski]

claymores miner is the slowest on cryptonight +highest power consumption+ Fee...dont understand why somebody using it, xmr-stak and sgminer are the best for polaris gpus.

& you have such bad speed because your bios mod sucks

is it possible to set voltages directly in xmr-stak or sgminer?

Thanks for the trouble!

sgminer yes but depends on your amd driver...old blockchain driver -yes. 17.10.*-17.11.* -no

[Turkish88]

hashrate depend from memory speed and vendor.
Elpida is the most worst memory chips around overclocking comunity.

[MiningDoc]

Which miner are you using?

I'm using claymore 10.2 but I'm not getting such good results so.

I use -h 800 Is it too low?
 

I use sgminer.  claymore is NOT may favorite

[Brondo76]

Mine Electroneum !!! The best Cryptonight!!!   

10 Kh/s for 24 hours to give Bitcoin:

Bytecoin 0,00137
Monero 0,00287
Electroneum 0,00392 

http://mine.klondikepool.com