Vuliooo (OP)
Newbie
 Offline
Activity: 2
Merit: 0
|
 |
December 06, 2017, 09:30:15 PM
Last edit: December 06, 2017, 09:33:34 PM by -ck |
|
Hi Miners =) I recieved Antminer s9 14T and i cant get it to work. something is wrong and i dont know what. I tried with firmware upgrade....still the same problem. https://imgur.com/a/6UoKzthis is my kernel log bmminer failed also PLease someone help me with this I have psu APW3++ [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000302] ps7-ttc #0 at f0006000, irq=43
[ 0.000611] Console: colour dummy device 80x30
[ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040205] pid_max: default: 32768 minimum: 301
[ 0.040430] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040452] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042603] CPU: Testing write buffer coherency: ok
[ 0.042951] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043012] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043234] L310 cache controller enabled
[ 0.043253] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121030] CPU1: Booted secondary processor
[ 0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210355] Brought up 2 CPUs
[ 0.210375] SMP: Total of 2 processors activated.
[ 0.210383] CPU: All CPU(s) started in SVC mode.
[ 0.211050] devtmpfs: initialized
[ 0.213463] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214662] regulator-dummy: no parameters
[ 0.222346] NET: Registered protocol family 16
[ 0.224648] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226920] cpuidle: using governor ladder
[ 0.226933] cpuidle: using governor menu
[ 0.234323] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235827] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235841] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235954] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257596] bio: create slab <bio-0> at 0
[ 0.259012] vgaarb: loaded
[ 0.259740] SCSI subsystem initialized
[ 0.260748] usbcore: registered new interface driver usbfs
[ 0.260926] usbcore: registered new interface driver hub
[ 0.261199] usbcore: registered new device driver usb
[ 0.261739] media: Linux media interface: v0.10
[ 0.261897] Linux video capture interface: v2.00
[ 0.262136] pps_core: LinuxPPS API ver. 1 registered
[ 0.262148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262270] PTP clock support registered
[ 0.262620] EDAC MC: Ver: 3.0.0
[ 0.263669] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266522] DMA-API: preallocated 4096 debug entries
[ 0.266535] DMA-API: debugging enabled by kernel config
[ 0.266610] Switched to clocksource arm_global_timer
[ 0.287221] NET: Registered protocol family 2
[ 0.287871] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287967] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.288126] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288186] TCP: reno registered
[ 0.288206] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288255] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288533] NET: Registered protocol family 1
[ 0.288869] RPC: Registered named UNIX socket transport module.
[ 0.288881] RPC: Registered udp transport module.
[ 0.288890] RPC: Registered tcp transport module.
[ 0.288898] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288911] PCI: CLS 0 bytes, default 64
[ 0.289350] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291362] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292746] bounce pool size: 64 pages
[ 0.293657] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293859] msgmni has been set to 1486
[ 0.294641] io scheduler noop registered
[ 0.294656] io scheduler deadline registered
[ 0.294693] io scheduler cfq registered (default)
[ 0.310065] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.310085] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433141] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.005788] console [ttyPS0] enabled
[ 1.010081] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.017908] [drm] Initialized drm 1.1.0 20060810
[ 1.034807] brd: module loaded
[ 1.044163] loop: module loaded
[ 1.053726] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.059715] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.067545] libphy: XEMACPS mii bus: probed
[ 1.071913] ------------- phy_id = 0x3625e62
[ 1.076673] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.085467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092130] ehci-pci: EHCI PCI platform driver
[ 1.099366] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.106166] usbcore: registered new interface driver usb-storage
[ 1.113043] mousedev: PS/2 mouse device common for all mice
[ 1.119217] i2c /dev entries driver
[ 1.126093] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.131665] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.137586] Xilinx Zynq CpuIdle Driver started
[ 1.142425] sdhci: Secure Digital Host Controller Interface driver
[ 1.148604] sdhci: Copyright(c) Pierre Ossman
[ 1.152871] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.159700] mmc0: no vqmmc regulator found
[ 1.163715] mmc0: no vmmc regulator found
[ 1.206633] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.215304] usbcore: registered new interface driver usbhid
[ 1.220811] usbhid: USB HID core driver
[ 1.225521] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.231816] nand: Micron MT29F2G08ABAEAWP
[ 1.235785] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.241733] Bad block table found at page 131008, version 0x01
[ 1.247960] Bad block table found at page 130944, version 0x01
[ 1.254014] 3 ofpart partitions found on MTD device pl353-nand
[ 1.259793] Creating 3 MTD partitions on "pl353-nand":
[ 1.264884] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.272956] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.280267] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.289216] TCP: cubic registered
[ 1.292449] NET: Registered protocol family 17
[ 1.297165] Registering SWP/SWPB emulation handler
[ 1.303102] regulator-dummy: disabling
[ 1.307440] UBI: attaching mtd1 to ubi0
[ 1.833705] UBI: scanning is finished
[ 1.845336] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.852413] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.859175] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.865839] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.872717] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.878697] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.885805] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1411313766
[ 1.894847] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.904063] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.904068] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.908041] ALSA device list:
[ 1.908045] No soundcards found.
[ 1.924412] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.953568] UBIFS: recovery needed
[ 2.015884] UBIFS: recovery completed
[ 2.019597] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.025520] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.034654] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.044538] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.049578] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E7000DF8-CAC1-4941-A278-188D954B7F71, small LPT model
[ 2.061093] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.068516] devtmpfs: mounted
[ 2.071622] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.918634] random: dd urandom read with 0 bits of entropy available
[ 3.336651]
[ 3.336651] bcm54xx_config_init
[ 3.946656]
[ 3.946656] bcm54xx_config_init
[ 7.947480] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.953589] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.996700] In axi fpga driver!
[ 22.999772] request_mem_region OK!
[ 23.003163] AXI fpga dev virtual address is 0xf01fe000
[ 23.008295] *base_vir_addr = 0x8c510
[ 23.023270] In fpga mem driver!
[ 23.026507] request_mem_region OK!
[ 23.030127] fpga mem virtual address is 0xf3000000
[ 23.816636]
[ 23.816636] bcm54xx_config_init
[ 24.446669]
[ 24.446669] bcm54xx_config_init
[ 29.447468] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 29.453572] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 81583401123b885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[43] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[10] has core num=15
Chain[6] ASIC[47] has core num=2
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[2] has core num=3
Chain[7] ASIC[10] has core num=2
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[32] has core num=2
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[55] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-5,0,0,0,0,34,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-4,0,0,0,0,34,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-4,0,0,0,0,34,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1384 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1759 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21592 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=21944 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 8894 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 9119 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Tue Aug 15 11:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81583401123b885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[5] speed=6120
get fan[2] speed=5760
get fan[5] speed=6120
get fan[2] speed=5760
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[43] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[10] has core num=15
Chain[J7] ASIC[47] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[2] has core num=3
Chain[J8] ASIC[10] has core num=2
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[32] has core num=2
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[55] has core num=15
miner total rate=14017GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-5
Chain:5 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-4
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-5
Chain:5 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-4
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Detect a bad chip=10 on chain[6], fixed to 400M
Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-4
Chain:7 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Detect a bad chip=55 on chain[7], fixed to 400M
Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:7 max freq=662
Chain:7 min freq=662
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,-5,0,0,0,0,34,0
chain[5] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-5 typeID=55
New offset Chain[5] chip[244] local:38 remote:42 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,-4,0,0,0,0,34,0
chain[6] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[6] chip[244] local:34 remote:38 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,-4,0,0,0,0,34,0
chain[7] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-4 typeID=55
New offset Chain[7] chip[244] local:34 remote:39 offset:26
Chain[J8] chip[244] get middle temp offset=26 typeID=55
single board rate=4667 voltage limit=870 on chain[5]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4677 voltage limit=870 on chain[6]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4672 voltage limit=870 on chain[7]
last_testpatten_highest_pcb_temp=57 too low, fix voltage=900 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26597
last_nonce_num:35736
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26948
last_nonce_num:42847
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26947
last_nonce_num:42859
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=1026 total_tv_end_sys=1027
restartNum = 2 , auto-reinit enabled...
PCB temp>60 will set the voltage limited on chain[5], change voltage=870
PCB temp>60 now set pic voltage=125 on chain[5]
PCB temp>60 will set the voltage limited on chain[6], change voltage=870
PCB temp>60 now set pic voltage=125 on chain[6]
PCB temp>60 will set the voltage limited on chain[7], change voltage=870
PCB temp>60 now set pic voltage=125 on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=96.6360 Asic[02]=91.7710 Asic[03]=303.751 Asic[04]=92.5260 Asic[05]=94.9080 Asic[06]=91.5860 Asic[07]=95.8140 Asic[08]=94.0020
Asic[09]=94.4050 Asic[10]=93.2810 Asic[11]=93.6670 Asic[12]=94.7070 Asic[13]=93.2300 Asic[14]=556.550 Asic[15]=92.7440 Asic[16]=91.5860
Asic[17]=93.3650 Asic[18]=92.3580 Asic[19]=92.4420 Asic[20]=94.9420 Asic[21]=95.8810 Asic[22]=91.0490 Asic[23]=236.810 Asic[24]=90.4120
Asic[25]=94.1200 Asic[26]=94.9080 Asic[27]=94.8750 Asic[28]=94.1200 Asic[29]=102.525 Asic[30]=95.4120 Asic[31]=89.4890 Asic[32]=93.0460
Asic[33]=89.3210 Asic[34]=91.6030 Asic[35]=92.6100 Asic[36]=93.0960 Asic[37]=95.1600 Asic[38]=95.0420 Asic[39]=92.6430 Asic[40]=93.0790
Asic[41]=91.5700 Asic[42]=95.3110 Asic[43]=92.5090 Asic[44]=188.995 Asic[45]=94.6060 Asic[46]=94.6570 Asic[47]=94.1200 Asic[48]=552.675
Asic[49]=90.1430 Asic[50]=91.9550 Asic[51]=93.0630 Asic[52]=95.0930 Asic[53]=94.2870 Asic[54]=94.6230 Asic[55]=93.5830 Asic[56]=95.6800
Asic[57]=99.4050 Asic[58]=91.1840 Asic[59]=93.3980 Asic[60]=93.2470 Asic[61]=94.2710 Asic[62]=90.8650 Asic[63]=95.4790
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=91.6030 Asic[02]=86.6200 Asic[03]=1037.28 Asic[04]=87.8280 Asic[05]=89.8080 Asic[06]=86.4020 Asic[07]=90.3450 Asic[08]=89.1700
Asic[09]=88.7850 Asic[10]=88.5830 Asic[11]=77.7620 Asic[12]=89.3210 Asic[13]=88.5660 Asic[14]=522.106 Asic[15]=87.3920 Asic[16]=86.7380
Asic[17]=88.4830 Asic[18]=87.1570 Asic[19]=87.1400 Asic[20]=89.6570 Asic[21]=90.5800 Asic[22]=85.7810 Asic[23]=222.231 Asic[24]=86.0500
Asic[25]=88.5830 Asic[26]=89.4050 Asic[27]=88.6340 Asic[28]=88.5500 Asic[29]=97.6090 Asic[30]=90.0930 Asic[31]=84.1370 Asic[32]=87.7610
Asic[33]=83.9860 Asic[34]=86.2510 Asic[35]=87.0400 Asic[36]=88.0630 Asic[37]=89.6400 Asic[38]=89.3050 Asic[39]=87.3750 Asic[40]=87.5770
Asic[41]=86.1510 Asic[42]=89.6570 Asic[43]=380.658 Asic[44]=178.174 Asic[45]=89.7410 Asic[46]=89.1700 Asic[47]=88.7010 Asic[48]=518.801
Asic[49]=85.1270 Asic[50]=86.5700 Asic[51]=87.8790 Asic[52]=89.5060 Asic[53]=88.4990 Asic[54]=88.9360 Asic[55]=88.3320 Asic[56]=89.5400
Asic[57]=94.3550 Asic[58]=85.6300 Asic[59]=88.0800 Asic[60]=87.7610 Asic[61]=89.2880 Asic[62]=85.7140 Asic[63]=89.8250
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=80.4970 Asic[02]=76.3020 Asic[03]=251.087 Asic[04]=77.0070 Asic[05]=78.9200 Asic[06]=75.9330 Asic[07]=79.4900 Asic[08]=77.8460
Asic[09]=78.0140 Asic[10]=77.3760 Asic[11]=77.6610 Asic[12]=78.5670 Asic[13]=77.8290 Asic[14]=458.940 Asic[15]=76.7890 Asic[16]=75.7320
Asic[17]=1312.85 Asic[18]=76.5870 Asic[19]=76.6040 Asic[20]=78.7850 Asic[21]=79.8250 Asic[22]=75.5140 Asic[23]=195.454 Asic[24]=75.2620
Asic[25]=77.8460 Asic[26]=78.5500 Asic[27]=78.2820 Asic[28]=77.8960 Asic[29]=81.8560 Asic[30]=79.1710 Asic[31]=73.9530 Asic[32]=77.1750
Asic[33]=73.8020 Asic[34]=75.7820 Asic[35]=76.5040 Asic[36]=77.1410 Asic[37]=78.7690 Asic[38]=78.5500 Asic[39]=76.8220 Asic[40]=76.9730
Asic[41]=75.8830 Asic[42]=78.8020 Asic[43]=76.9060 Asic[44]=156.279 Asic[45]=78.8520 Asic[46]=78.3490 Asic[47]=77.9460 Asic[48]=455.836
Asic[49]=74.8090 Asic[50]=75.9840 Asic[51]=77.2250 Asic[52]=78.8860 Asic[53]=78.2320 Asic[54]=78.1480 Asic[55]=77.6280 Asic[56]=68.6180
Asic[57]=78.9530 Asic[58]=75.2450 Asic[59]=77.2420 Asic[60]=77.3930 Asic[61]=78.7010 Asic[62]=75.2960 Asic[63]=79.1710
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[03]=303.751000
Asic[14]=556.550000
Asic[23]=236.810000
Asic[29]=102.525000
Asic[44]=188.995000
Asic[48]=552.675000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[03]=1037.280000
Asic[14]=522.106000
Asic[23]=222.231000
Asic[43]=380.658000
Asic[44]=178.174000
Asic[48]=518.801000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[03]=251.087000
Asic[14]=458.940000
Asic[17]=1312.850000
Asic[23]=195.454000
Asic[44]=156.279000
Asic[48]=455.836000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=71
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=58
Chain[6] Chip[62] middle Temp=70
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=26
Chain[7] Chip[62] local Temp=58
Chain[7] Chip[62] middle Temp=68
Done read temp on Chain[7]
set FAN speed according to: temp_highest=60 temp_top1[PWM_T]=60 temp_top1[TEMP_POS_LOCAL]=60 temp_change=2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 70
read_temp_func Done!
CRC error counter=0
MOD EDIT |
