cimpex
|
|
August 03, 2013, 01:04:28 PM |
|
wich one, there are two different.
|
|
|
|
Foofighter (OP)
|
|
August 03, 2013, 01:13:56 PM |
|
I will only produce the open design, as mentioned: Overview Frontside But iam already talking to a reseller for the Rack case design.
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
madsusies
Sr. Member
Offline
Activity: 428
Merit: 250
BitcoinEvo [$XBTE]
|
|
August 03, 2013, 01:25:38 PM |
|
I will only produce the open design, as mentioned: Overview Frontside But iam already talking to a reseller for the Rack case design. At some point your design is useless. 90% of peeps count to "overclock" the units. From fact here is a small space between boards people need use the extension cables to be able use heatsink + direct fans.
|
|
|
|
Foofighter (OP)
|
|
August 03, 2013, 01:35:13 PM |
|
The space between boards is defined bei the standard mboard design, there is still space in the case to upgrade to a longer mboard lateron, as already meantioned the Standard hboard hab only a 30A capacitor and can not really be overclocked, this capacitor is also the biggest size for the footprint on the hboards.
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
madsusies
Sr. Member
Offline
Activity: 428
Merit: 250
BitcoinEvo [$XBTE]
|
|
August 03, 2013, 01:57:19 PM |
|
The space between boards is defined bei the standard mboard design, there is still space in the case to upgrade to a longer mboard lateron, as already meantioned the Standard hboard hab only a 30A capacitor and can not really be overclocked, this capacitor is also the biggest size for the footprint on the hboards.
interesting fact, for vulnerable people an unpleasant to know the chips can't run a full speed. From that POV you will have a nice heater for the winter, 16 boards at 45C look hot
|
|
|
|
Foofighter (OP)
|
|
August 04, 2013, 09:10:26 AM |
|
Hey guys, I decided to add 3 120mm Fans to all cases, so these are now included in the pricing. I hope this saves you some trouble with sourcing fans on you own and the cable management of the fans.
Foofighter
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Coinmining
Newbie
Offline
Activity: 34
Merit: 0
|
|
August 04, 2013, 09:28:12 AM |
|
I want one!
Sent you a PM
|
|
|
|
Foofighter (OP)
|
|
August 04, 2013, 11:12:39 AM |
|
For the moment, 4 Units are reserved and 4 cases still open to sell.
regards
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Foofighter (OP)
|
|
August 05, 2013, 06:10:41 PM |
|
gogo guys, still 4 units open for sale here!
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
August 06, 2013, 02:07:03 AM |
|
I'm interested in acquiring one of these for an October order.
Have you settled on a final design ? I see according to the prototype photos, that the RasPi is directly attached to the M-Board, and not compatible with your case design.
I would be interested in a covered case, opposed to something exposed.
|
|
|
|
Gyrsur
Legendary
Offline
Activity: 2856
Merit: 1520
Bitcoin Legal Tender Countries: 2 of 206
|
|
August 06, 2013, 06:05:53 AM |
|
i'm also interested in the Rack Casing Design for October.
|
|
|
|
Foofighter (OP)
|
|
August 06, 2013, 07:20:55 AM |
|
I'm interested in acquiring one of these for an October order.
Have you settled on a final design ? I see according to the prototype photos, that the RasPi is directly attached to the M-Board, and not compatible with your case design.
I would be interested in a covered case, opposed to something exposed.
Hi, open desin is final, rack design is semi finished(would change the alignment of the inner parts probably to fit 2 mboards). For sure it is compatible with my design, prototypes uses the wrong connectors and they are hopefully changed for the mass produced boards. Additionally you can mount the raspi at my design on the ground with a GPIO cable, this would be up to you. It would be too expensive to add a cover to the open case design attempt, because i would have to make it more wide and also add fans to the cover to still have a forced airflow. The only option would be the Rack design, which was supposed to have a cover anyway. From the timetable it would be possible to get Rack case prototypes in october as the production and order of parts would take about 3 -4 weeks until my design would be finished. Many people here are talking about modded Rack cases to use for these attemts but I dont know any manufacturer which would make this alteration to a final Rack case(at least not here where I live), also the most final Rack cases which we can purchase on the market doesnt provide the necessary airflow because the lack of the necessary amount of 120mm Fans. To summarize this: I will think about that matter if this makes sense for me. I would try 2 attempts, to change an existing 19" 4U case and to ask for a whole new produced case. But maybe I will first talk to spotswood(open case reseller), maybe we can work together in this matter. Thanks for your interest guys! But for the moment i can only offer you the open case desgin. regards Foofighter
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Gyrsur
Legendary
Offline
Activity: 2856
Merit: 1520
Bitcoin Legal Tender Countries: 2 of 206
|
|
August 06, 2013, 09:13:14 AM |
|
I'm interested in acquiring one of these for an October order.
Have you settled on a final design ? I see according to the prototype photos, that the RasPi is directly attached to the M-Board, and not compatible with your case design.
I would be interested in a covered case, opposed to something exposed.
Hi, open desin is final, rack design is semi finished(would change the alignment of the inner parts probably to fit 2 mboards). great to hear this, definitly interested in this case for a 800GH beast!
|
|
|
|
Foofighter (OP)
|
|
August 07, 2013, 05:44:05 PM |
|
Hey guys,
some News here regarding the purchaseable open cases.
Iam very happy to annouce that I can reduce the price for each open case to: 145 EUR
Today I discussed the whole project with a manufacturer who could do all necessary steps of manufaturing on his own to finish the cases at very competitive prices.
Before that the price was based of raw case which i had to transport to a welder and then painted the cases, so as you could imagine that would have been a lot of additional work compared to the current solution. I gave the whole saving directly to you, so you have a more competitive price for a good product.
So i hope now with this price the cases are getting sold a bit faster.
regards Tom
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
pbigmoon
Newbie
Offline
Activity: 59
Merit: 0
|
|
August 07, 2013, 06:16:15 PM |
|
Hey guys,
some News here regarding the purchaseable open cases.
Iam very happy to annouce that I can reduce the price for each open case to: 145 EUR
Today I discussed the whole project with a manufacturer who could do all necessary steps of manufaturing on his own to finish the cases at very competitive prices.
Before that the price was based of raw case which i had to transport to a welder and then painted the cases, so as you could imagine that would have been a lot of additional work compared to the current solution. I gave the whole saving directly to you, so you have a more competitive price for a good product.
So i hope now with this price the cases are getting sold a bit faster.
regards Tom
Is delivery still planned for September?
|
|
|
|
Foofighter (OP)
|
|
August 07, 2013, 06:24:22 PM |
|
with this new manufacturer there is a bigger possibility that i could shipped the cases in last week of august. I would try my best to manage this.
EDIT: I dont wanna make any promises i cannot hold, so i have to stay with my conservative statement here, but i think its possible
Foofighter
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Foofighter (OP)
|
|
August 08, 2013, 05:16:05 PM |
|
Update: -3 cases sold -2 cases will be kept by me
5 cases still to sell here
Will order tommorow and hopefully know an excact lead time very soon.
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
yurtesen
Member
Offline
Activity: 83
Merit: 10
|
|
August 08, 2013, 11:26:05 PM |
|
5 cases still to sell here
Why wouldnt you make more cases and make some profit out of it?
|
|
|
|
Foofighter (OP)
|
|
August 09, 2013, 04:59:34 AM |
|
5 cases still to sell here
Why wouldnt you make more cases and make some profit out of it? Iam already in talks with potential resellers, Iam not interested in selling cases on my own here in masses, dont got the time for it.
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
Foofighter (OP)
|
|
August 09, 2013, 10:44:42 AM |
|
Hi guys,
so only 4 cases left to sell now
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
|