|
cryptonitro (OP)
|
 |
December 12, 2017, 09:34:09 AM |
|
Hello friends , as the luckiest guy (<-joke) i got 1 S9 today , just plug it (ever got antminers) enjoy the noise of fans and then nothing in miner statut ... the miner fans is go slowly like normal way , the green light is on (normal) and then fans gone crazy again , and again .... like restart ... very unhappy, i feel sick ... here screens   here logs [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000307] ps7-ttc #0 at f0006000, irq=43
[ 0.000614] Console: colour dummy device 80x30
[ 0.000651] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040449] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042600] CPU: Testing write buffer coherency: ok
[ 0.042946] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043004] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043224] L310 cache controller enabled
[ 0.043244] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121038] CPU1: Booted secondary processor
[ 0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211038] devtmpfs: initialized
[ 0.213451] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214648] regulator-dummy: no parameters
[ 0.222339] NET: Registered protocol family 16
[ 0.224635] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226903] cpuidle: using governor ladder
[ 0.226917] cpuidle: using governor menu
[ 0.234302] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235811] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235825] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235939] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257348] bio: create slab <bio-0> at 0
[ 0.258739] vgaarb: loaded
[ 0.259470] SCSI subsystem initialized
[ 0.260463] usbcore: registered new interface driver usbfs
[ 0.260641] usbcore: registered new interface driver hub
[ 0.260863] usbcore: registered new device driver usb
[ 0.262143] media: Linux media interface: v0.10
[ 0.262303] Linux video capture interface: v2.00
[ 0.262542] pps_core: LinuxPPS API ver. 1 registered
[ 0.262554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262684] PTP clock support registered
[ 0.263033] EDAC MC: Ver: 3.0.0
[ 0.264066] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266450] DMA-API: preallocated 4096 debug entries
[ 0.266464] DMA-API: debugging enabled by kernel config
[ 0.266546] Switched to clocksource arm_global_timer
[ 0.286840] NET: Registered protocol family 2
[ 0.287495] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287593] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287752] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287816] TCP: reno registered
[ 0.287833] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287884] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288147] NET: Registered protocol family 1
[ 0.288498] RPC: Registered named UNIX socket transport module.
[ 0.288509] RPC: Registered udp transport module.
[ 0.288518] RPC: Registered tcp transport module.
[ 0.288526] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288539] PCI: CLS 0 bytes, default 64
[ 0.288980] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290997] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292374] bounce pool size: 64 pages
[ 0.293272] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293473] msgmni has been set to 1486
[ 0.294250] io scheduler noop registered
[ 0.294263] io scheduler deadline registered
[ 0.294304] io scheduler cfq registered (default)
[ 0.303961] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.303981] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.426297] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.999084] console [ttyPS0] enabled
[ 1.003359] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.010986] [drm] Initialized drm 1.1.0 20060810
[ 1.028142] brd: module loaded
[ 1.037521] loop: module loaded
[ 1.047183] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052934] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060986] libphy: XEMACPS mii bus: probed
[ 1.065356] ------------- phy_id = 0x3625e62
[ 1.070141] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.085382] ehci-pci: EHCI PCI platform driver
[ 1.092610] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.099462] usbcore: registered new interface driver usb-storage
[ 1.106311] mousedev: PS/2 mouse device common for all mice
[ 1.112465] i2c /dev entries driver
[ 1.119399] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124882] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130798] Xilinx Zynq CpuIdle Driver started
[ 1.135644] sdhci: Secure Digital Host Controller Interface driver
[ 1.141788] sdhci: Copyright(c) Pierre Ossman
[ 1.146079] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152950] mmc0: no vqmmc regulator found
[ 1.156994] mmc0: no vmmc regulator found
[ 1.196567] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205264] usbcore: registered new interface driver usbhid
[ 1.210773] usbhid: USB HID core driver
[ 1.215476] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221770] nand: Micron MT29F2G08ABAEAWP
[ 1.225738] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231689] Bad block table found at page 131008, version 0x01
[ 1.237915] Bad block table found at page 130944, version 0x01
[ 1.243969] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249754] Creating 3 MTD partitions on "pl353-nand":
[ 1.254851] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262904] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270213] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279148] TCP: cubic registered
[ 1.282385] NET: Registered protocol family 17
[ 1.287110] Registering SWP/SWPB emulation handler
[ 1.293043] regulator-dummy: disabling
[ 1.297377] UBI: attaching mtd1 to ubi0
[ 1.825360] UBI: scanning is finished
[ 1.837009] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844067] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850853] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857539] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.864377] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870387] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877498] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 916511165
[ 1.886425] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895656] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.895661] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899636] ALSA device list:
[ 1.899639] No soundcards found.
[ 1.915995] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.945052] UBIFS: recovery needed
[ 2.031626] UBIFS: recovery completed
[ 2.035298] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.041253] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.050353] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.060241] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.065271] UBIFS: media format: w4/r0 (latest is w4/r0), UUID BBDF9B01-1A34-456B-9FBF-33B446951E64, small LPT model
[ 2.076803] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.083759] devtmpfs: mounted
[ 2.086891] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.923749] random: dd urandom read with 0 bits of entropy available
[ 3.316590]
[ 3.316590] bcm54xx_config_init
[ 3.926591]
[ 3.926591] bcm54xx_config_init
[ 7.927420] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.933513] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 24.296079] In axi fpga driver!
[ 24.299181] request_mem_region OK!
[ 24.302540] AXI fpga dev virtual address is 0xf01fe000
[ 24.307679] *base_vir_addr = 0x8c510
[ 24.322742] In fpga mem driver!
[ 24.325945] request_mem_region OK!
[ 24.329567] fpga mem virtual address is 0xf3000000
[ 25.136582]
[ 25.136582] bcm54xx_config_init
[ 25.766570]
[ 25.766570] bcm54xx_config_init
[ 29.767426] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 29.773446] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 807cf58162bb885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[50] has core num=3
Chain[5] ASIC[62] has core num=3
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[46] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1383 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 2039 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 21 05:15:25 EDT 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 807cf58162bb885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
get fan[2] speed=6120
get fan[5] speed=6120
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[50] has core num=3
Chain[J6] ASIC[62] has core num=3
Chain[J7] has core num in PIC
Chain[J7] ASIC[46] has core num=15
Chain[J8] has core num in PIC
miner total rate=13869GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=643
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Detect a bad chip=46 on chain[6], fixed to 400M
Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637
Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 Asic[40]:637
Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 Asic[48]:637
Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 Asic[56]:637
Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:7 max freq=637
Chain:7 min freq=637
max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:25 remote:28 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:17 remote:19 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:17 remote:22 offset:24
Chain[J8] chip[244] get middle temp offset=24 typeID=55
single board rate=4651 voltage limit=890 on chain[5]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 900
retryFlag=1 will set the voltage limited on chain[5], change voltage=900
now set pic voltage=74 on chain[5]
single board rate=4544 voltage limit=890 on chain[6]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 900
retryFlag=1 will set the voltage limited on chain[6], change voltage=900
now set pic voltage=74 on chain[6]
single board rate=4574 voltage limit=890 on chain[7]
last_testpatten_highest_pcb_temp=52 too low, fix voltage=900 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 900
retryFlag=1 will set the voltage limited on chain[7], change voltage=900
now set pic voltage=74 on chain[7]
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=911 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[50]=911
core[060]=7
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26552
last_nonce_num:28636
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=903 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=911 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[12]=903
core[060]=6 core[082]=7 core[101]=5 core[104]=5
asic[58]=911
core[058]=7
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57446
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26193
last_nonce_num:28617
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=911 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=908 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=876 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=904 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=910 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=905
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=911
core[043]=7
asic[14]=908
core[001]=6 core[060]=7 core[063]=7
asic[22]=876
core[003]=7 core[029]=5 core[059]=7 core[060]=5 core[070]=6 core[082]=6 core[095]=4 core[096]=3 core[097]=6 core[100]=4 core[102]=4 core[103]=7 core[113]=4
asic[29]=904
core[060]=4 core[062]=5 core[088]=7
asic[51]=910
core[058]=6
asic[55]=905
core[058]=7 core[060]=4 core[062]=7 core[088]=7
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637
total valid nonce number:57398
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26094
last_nonce_num:28644
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=50
Chain[5] Chip[62] middle Temp=62
Special fix Chain[5] Chip[62] middle Temp = 65
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=45
Chain[6] Chip[62] middle Temp=56
Special fix Chain[6] Chip[62] middle Temp = 60
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=24
Chain[7] Chip[62] local Temp=47
Chain[7] Chip[62] middle Temp=57
Special fix Chain[7] Chip[62] middle Temp = 62
Done read temp on Chain[7]
set FAN speed according to: temp_highest=50 temp_top1[PWM_T]=50 temp_top1[TEMP_POS_LOCAL]=50 temp_change=2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 50
read_temp_func Done!
CRC error counter=0 did someone now what happen ? |
The only project make me believe ... Holochain
|
|
|
|
|
|
|
|
|
|
|
|
"Bitcoin: the cutting edge of begging technology." -- Giraffe.BTC
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
cryptonitro (OP)
|
|
December 12, 2017, 11:19:50 AM |
|
Look BMminer not starting.
Will try to upgrade s9 all from august.
Hope error from asic 7 is ok
|
The only project make me believe ... Holochain
|
|
|
|
cryptotore
|
|
December 12, 2017, 12:56:42 PM |
|
Relax bro, I'm certain you have just configured the miner wrong. If you want to test worker settings you could try to mine for a second on my account. Pool: stratum.kano.is:3333 Workername: torepia.test Password: x Keep in mind: You need to wait for about 10-20 minutes before the S9 will actually start working and show data under "Miner status" page. Refresh the miner status page every minute until you start seeing updates in the "Miner status" page. When you see data on the status page, and Pool = Alive, then you know it was just a miner config error, and you can configure it to mine on your own account! The errors in the kernel log you are seeing is NORMAL!  Cheers! |
|
|
|
|
|
cryptonitro (OP)
|
|
December 12, 2017, 01:08:17 PM |
|
Relax bro, I'm certain you have just configured the miner wrong. If you want to test worker settings you could try to mine for a second on my account. Pool: stratum.kano.is:3333 Workername: torepia.test Password: x Keep in mind: You need to wait for about 10-20 minutes before the S9 will actually start working and show data under "Miner status" page. Refresh the miner status page every minute until you start seeing updates in the "Miner status" page. When you see data on the status page, and Pool = Alive, then you know it was just a miner config error, and you can configure it to mine on your own account! The errors in the kernel log you are seeing is NORMAL! Cheers! Thanks for answer , will try but i let the antminer settings at 1st and wasnt working to.other antminer i have (not sha256) dont take 20min to start and this one restart fewly Think i will had cgminer release then |
The only project make me believe ... Holochain
|
|
|
|
cryptotore
|
|
December 12, 2017, 01:13:01 PM |
|
Relax bro, I'm certain you have just configured the miner wrong. If you want to test worker settings you could try to mine for a second on my account. Pool: stratum.kano.is:3333 Workername: torepia.test Password: x Keep in mind: You need to wait for about 10-20 minutes before the S9 will actually start working and show data under "Miner status" page. Refresh the miner status page every minute until you start seeing updates in the "Miner status" page. When you see data on the status page, and Pool = Alive, then you know it was just a miner config error, and you can configure it to mine on your own account! The errors in the kernel log you are seeing is NORMAL! Cheers! Thanks for answer , will try but i let the antminer settings at 1st and wasnt working to.other antminer i have (not sha256) dont take 20min to start and this one restart fewly Think i will had cgminer release then Just try it, I had the same issue with my S9 I got last week  |
|
|
|
|
|
cryptonitro (OP)
|
|
December 12, 2017, 01:56:38 PM
Last edit: December 12, 2017, 06:58:37 PM by cryptonitro |
|
Feel better will try later , thanks a lot my friend
edit , was good with your settings ... so much wait for see it , and damm the noise ....
i have to learn how to remove fan check to get silents ones
|
The only project make me believe ... Holochain
|
|
|
|
fanatic26
|
|
December 12, 2017, 10:52:35 PM |
|
i have to learn how to remove fan check to get silents ones
You purchased an industrial miner, it needs to make that kind of noise to stay cool. You put 'silent' fans on it and it will either not run at all from lack of fan RPM or it will overheat from lack of fan output. |
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
|
cableiso
|
|
December 12, 2017, 11:08:14 PM
Last edit: December 13, 2017, 01:31:11 AM by cableiso |
|
Did you put your own pool and username back in?
You do realize that you are giving your hashes to cryptotore. Right?
|
|
|
|
|
|
cryptonitro (OP)
|
|
December 13, 2017, 09:55:43 AM |
|
Did you put your own pool and username back in?
You do realize that you are giving your hashes to cryptotore. Right?
Lol thanks im not so newbie And there is better 6000rpm fans , the liwer frequency and voltage help for low temp |
The only project make me believe ... Holochain
|
|
|
NotFuzzyWarm
Legendary
 Offline
Activity: 3626
Merit: 2533
Evil beware: We have waffles!
|
|
December 20, 2017, 09:28:14 PM |
|
Guys,
I need help. It looks like my miner is not starting up. I dont see any data on the Miner Status. This is a brandnew S9 about 5 days ago. Thanks,
I have these on the kernel logs. I see this error from the logs. Do I assume that one of the hashing board is broken? <snip>
Dude, learn how to post in a Forum! At the top look for a formatting icon that looks like # that is for posting code & logs. Turns your text wall into a much more tolerable Chain:7 temp offset=0
Chain:7 base freq=687
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Detect a bad chip=7 on chain[7], fixed to 400M
Asic[ 7]:687 Asic[ 8]:675
Asic[ 9]:675 Detect a bad chip=10 on chain[7], fixed to 400M
Asic[10]:687 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Detect a bad chip=15 on chain[7], fixed to 400M
Asic[15]:687 Asic[16]:675
=================================
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
0
1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at f0006000, irq=43
[ 0.000610] Console: colour dummy device 80x30
[ 0.000647] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040203] pid_max: default: 32768 minimum: 301
[ 0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042600] CPU: Testing write buffer coherency: ok
[ 0.042946] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043006] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043226] L310 cache controller enabled
[ 0.043245] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121029] CPU1: Booted secondary processor
[ 0.210223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210353] Brought up 2 CPUs
[ 0.210372] SMP: Total of 2 processors activated.
[ 0.210380] CPU: All CPU(s) started in SVC mode.
[ 0.211028] devtmpfs: initialized
[ 0.213439] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214641] regulator-dummy: no parameters
[ 0.222331] NET: Registered protocol family 16
[ 0.224512] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226790] cpuidle: using governor ladder
[ 0.226805] cpuidle: using governor menu
[ 0.234217] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235713] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235727] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235841] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257268] bio: create slab <bio-0> at 0
[ 0.258655] vgaarb: loaded
[ 0.259369] SCSI subsystem initialized
[ 0.260395] usbcore: registered new interface driver usbfs
[ 0.260573] usbcore: registered new interface driver hub
[ 0.260795] usbcore: registered new device driver usb
[ 0.261566] media: Linux media interface: v0.10
[ 0.261732] Linux video capture interface: v2.00
[ 0.261969] pps_core: LinuxPPS API ver. 1 registered
[ 0.261981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262106] PTP clock support registered
[ 0.262469] EDAC MC: Ver: 3.0.0
[ 0.263508] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266358] DMA-API: preallocated 4096 debug entries
[ 0.266371] DMA-API: debugging enabled by kernel config
[ 0.266445] Switched to clocksource arm_global_timer
[ 0.286901] NET: Registered protocol family 2
[ 0.287567] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287663] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287822] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287890] TCP: reno registered
[ 0.287907] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287960] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288218] NET: Registered protocol family 1
[ 0.288567] RPC: Registered named UNIX socket transport module.
[ 0.288579] RPC: Registered udp transport module.
[ 0.288588] RPC: Registered tcp transport module.
[ 0.288596] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288609] PCI: CLS 0 bytes, default 64
[ 0.289047] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291099] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292441] bounce pool size: 64 pages
[ 0.293329] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293531] msgmni has been set to 1486
[ 0.294313] io scheduler noop registered
[ 0.294326] io scheduler deadline registered
[ 0.294386] io scheduler cfq registered (default)
[ 0.305736] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305757] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428904] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.001486] console [ttyPS0] enabled
[ 1.005745] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.013381] [drm] Initialized drm 1.1.0 20060810
[ 1.030363] brd: module loaded
[ 1.039750] loop: module loaded
[ 1.049281] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.055028] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.062912] libphy: XEMACPS mii bus: probed
[ 1.067474] ------------- phy_id = 0x3625e62
[ 1.072202] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.080774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.087432] ehci-pci: EHCI PCI platform driver
[ 1.094630] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.101585] usbcore: registered new interface driver usb-storage
[ 1.108458] mousedev: PS/2 mouse device common for all mice
[ 1.114562] i2c /dev entries driver
[ 1.121473] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.126996] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.132873] Xilinx Zynq CpuIdle Driver started
[ 1.137751] sdhci: Secure Digital Host Controller Interface driver
[ 1.143849] sdhci: Copyright(c) Pierre Ossman
[ 1.148231] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.154985] mmc0: no vqmmc regulator found
[ 1.159029] mmc0: no vmmc regulator found
[ 1.196471] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205151] usbcore: registered new interface driver usbhid
[ 1.210658] usbhid: USB HID core driver
[ 1.215397] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.221698] nand: Micron MT29F2G08ABAEAWP
[ 1.225662] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.231612] Bad block table found at page 131008, version 0x01
[ 1.237841] Bad block table found at page 130944, version 0x01
[ 1.243893] 3 ofpart partitions found on MTD device pl353-nand
[ 1.249681] Creating 3 MTD partitions on "pl353-nand":
[ 1.254770] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262819] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270149] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279120] TCP: cubic registered
[ 1.282353] NET: Registered protocol family 17
[ 1.287070] Registering SWP/SWPB emulation handler
[ 1.292993] regulator-dummy: disabling
[ 1.297337] UBI: attaching mtd1 to ubi0
[ 1.824685] UBI: scanning is finished
[ 1.836316] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843392] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850154] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.856840] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863675] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869677] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.876800] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 916511165
[ 1.885723] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.894956] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.894961] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.898932] ALSA device list:
[ 1.898935] No soundcards found.
[ 1.915322] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.944344] UBIFS: recovery needed
[ 2.017478] UBIFS: recovery completed
[ 2.021149] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.027091] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.036187] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.046089] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.051128] UBIFS: media format: w4/r0 (latest is w4/r0), UUID BBDF9B01-1A34-456B-9FBF-33B446951E64, small LPT model
[ 2.062408] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.069389] devtmpfs: mounted
[ 2.072496] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.915056] random: dd urandom read with 0 bits of entropy available
[ 3.306487]
[ 3.306487] bcm54xx_config_init
[ 3.916480]
[ 3.916480] bcm54xx_config_init
[ 7.917332] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.923425] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.280328] In axi fpga driver!
[ 22.283399] request_mem_region OK!
[ 22.286822] AXI fpga dev virtual address is 0xf01fe000
[ 22.291896] *base_vir_addr = 0x8c510
[ 22.307079] In fpga mem driver!
[ 22.310273] request_mem_region OK!
[ 22.313830] fpga mem virtual address is 0xf3000000
[ 23.126006]
[ 23.126006] bcm54xx_config_init
[ 23.755949]
[ 23.755949] bcm54xx_config_init
[ 27.756388] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.762404] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 979.384284] random: nonblocking pool is initialized
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 8014c401123b8854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[43] has core num=15
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[1] has core num=2
Chain[7] ASIC[4] has core num=2
Chain[7] ASIC[7] has core num=15
Chain[7] ASIC[8] has core num=2
Chain[7] ASIC[10] has core num=15
Chain[7] ASIC[15] has core num=15
Chain[7] ASIC[41] has core num=7
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=91 on chain[6], value=890
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=29573 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 21 05:15:25 EDT 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8014c401123b8854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
get fan[2] speed=5880
get fan[5] speed=4680
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J7] has core num in PIC
Chain[J7] ASIC[43] has core num=15
Chain[J8] has core num in PIC
Chain[J8] ASIC[1] has core num=2
Chain[J8] ASIC[4] has core num=2
Chain[J8] ASIC[7] has core num=15
Chain[J8] ASIC[8] has core num=2
Chain[J8] ASIC[10] has core num=15
Chain[J8] ASIC[15] has core num=15
Chain[J8] ASIC[41] has core num=7
miner total rate=13989GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:7 max freq=687
Chain:7 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:5 max freq=643
Chain:5 min freq=637
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=643
Asic[ 0]:643
Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 Asic[ 8]:643
Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 Asic[16]:643
Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 Asic[24]:643
Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 Asic[32]:643
Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 Asic[40]:643
Asic[41]:643 Asic[42]:643 Detect a bad chip=43 on chain[6], fixed to 400M
Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 Asic[48]:643
Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 Asic[56]:643
Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643
Chain:6 max freq=643
Chain:6 min freq=643
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=687
Asic[ 0]:675
Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Detect a bad chip=7 on chain[7], fixed to 400M
Asic[ 7]:687 Asic[ 8]:675
Asic[ 9]:675 Detect a bad chip=10 on chain[7], fixed to 400M
Asic[10]:687 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Detect a bad chip=15 on chain[7], fixed to 400M
Asic[15]:687 Asic[16]:675
Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675
Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675
Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675
Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675
Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:681 Asic[56]:681
Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:7 max freq=687
Chain:7 min freq=675
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:36 remote:42 offset:25
Chain[J6] chip[244] get middle temp offset=25 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:35 remote:40 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:35 remote:39 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=55
single board rate=4613 voltage limit=890 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 890
single board rate=4544 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
single board rate=4613 voltage limit=890 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 890
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26329
last_nonce_num:28615
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=643 freq[01]=643 freq[02]=643 freq[03]=643 freq[04]=643 freq[05]=643 freq[06]=643 freq[07]=643
freq[08]=643 freq[09]=643 freq[10]=643 freq[11]=643 freq[12]=643 freq[13]=643 freq[14]=643 freq[15]=643
freq[16]=643 freq[17]=643 freq[18]=643 freq[19]=643 freq[20]=643 freq[21]=643 freq[22]=643 freq[23]=643
freq[24]=643 freq[25]=643 freq[26]=643 freq[27]=643 freq[28]=643 freq[29]=643 freq[30]=643 freq[31]=643
freq[32]=643 freq[33]=643 freq[34]=643 freq[35]=643 freq[36]=643 freq[37]=643 freq[38]=643 freq[39]=643
freq[40]=643 freq[41]=643 freq[42]=643 freq[43]=643 freq[44]=643 freq[45]=643 freq[46]=643 freq[47]=643
freq[48]=643 freq[49]=643 freq[50]=643 freq[51]=643 freq[52]=643 freq[53]=643 freq[54]=643 freq[55]=643
freq[56]=643 freq[57]=643 freq[58]=643 freq[59]=643 freq[60]=643 freq[61]=643 freq[62]=643
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26212
last_nonce_num:35752
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=467 asic[02]=912 asic[03]=912 asic[04]=800 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=909 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=520 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[01]=467
core[058]=0 core[059]=0 core[060]=0 core[061]=1 core[062]=1 core[063]=1 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[04]=800
core[011]=7 core[026]=7 core[032]=7 core[082]=6 core[100]=0 core[101]=1 core[102]=0 core[103]=1 core[104]=1 core[105]=1 core[106]=0 core[107]=0 core[108]=1 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[14]=909
core[001]=7 core[040]=7 core[053]=7
asic[41]=520
core[013]=7 core[014]=7 core[021]=7 core[053]=7 core[058]=0 core[059]=7 core[060]=4 core[061]=6 core[062]=0 core[063]=3 core[064]=0 core[065]=4 core[066]=5 core[067]=3 core[068]=3 core[069]=4 core[070]=4 core[071]=4 core[072]=0 core[073]=1 core[074]=0 core[075]=0 core[076]=1 core[077]=0 core[078]=1 core[079]=1 core[080]=1 core[081]=1 core[082]=1 core[083]=1 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=1 core[089]=2 core[090]=0 core[091]=0 core[092]=0 core[093]=1 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=1 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=675 freq[01]=675 freq[02]=675 freq[03]=675 freq[04]=675 freq[05]=675 freq[06]=675 freq[07]=687
freq[08]=675 freq[09]=675 freq[10]=687 freq[11]=675 freq[12]=675 freq[13]=675 freq[14]=675 freq[15]=687
freq[16]=675 freq[17]=675 freq[18]=675 freq[19]=675 freq[20]=675 freq[21]=675 freq[22]=675 freq[23]=675
freq[24]=675 freq[25]=675 freq[26]=675 freq[27]=675 freq[28]=675 freq[29]=675 freq[30]=675 freq[31]=675
freq[32]=675 freq[33]=675 freq[34]=675 freq[35]=675 freq[36]=675 freq[37]=675 freq[38]=675 freq[39]=675
freq[40]=675 freq[41]=675 freq[42]=675 freq[43]=675 freq[44]=675 freq[45]=675 freq[46]=675 freq[47]=675
freq[48]=675 freq[49]=675 freq[50]=675 freq[51]=675 freq[52]=675 freq[53]=675 freq[54]=675 freq[55]=681
freq[56]=681 freq[57]=681 freq[58]=681 freq[59]=681 freq[60]=681 freq[61]=681 freq[62]=681
total valid nonce number:56504
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26603
last_nonce_num:43077
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=25
Chain[5] Chip[62] local Temp=67
Chain[5] Chip[62] middle Temp=76
Special fix Chain[5] Chip[62] middle Temp = 82
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
Chain[6] Chip[62] local Temp=64
Chain[6] Chip[62] middle Temp=74
Special fix Chain[6] Chip[62] middle Temp = 79
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=65
Chain[7] Chip[62] middle Temp=74
Special fix Chain[7] Chip[62] middle Temp = 80
Done read temp on Chain[7]
set FAN speed according to: temp_highest=67 temp_top1[PWM_T]=67 temp_top1[TEMP_POS_LOCAL]=67 temp_change=2 fix_fan_steps=0
set normal FAN speed...
FAN PWM: 84
read_temp_func Done!
CRC error counter=0 |
|
|
|
KWMiner
Newbie
Offline
Activity: 6
Merit: 0
|
|
December 21, 2017, 01:16:03 AM |
|
Relax bro, I'm certain you have just configured the miner wrong. If you want to test worker settings you could try to mine for a second on my account. Pool: stratum.kano.is:3333 Workername: torepia.test Password: x Keep in mind: You need to wait for about 10-20 minutes before the S9 will actually start working and show data under "Miner status" page. Refresh the miner status page every minute until you start seeing updates in the "Miner status" page. When you see data on the status page, and Pool = Alive, then you know it was just a miner config error, and you can configure it to mine on your own account! The errors in the kernel log you are seeing is NORMAL! Cheers! So for some reason when I point my S9 at your pool it works, but not when I point it at Antpool? Why is that? |
|
|
|
|
|
