Anyone use Asus B350F-Strix?

[ysakay]

Hi guys.
I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580.

I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work.

How can i worked with 5 gpu?

[GuerreiroDF]

I have the same problem

See
https://forum.ethereum.org/discussion/11804/rog-strix-b250f-gaming-motherboard-for-eth-mining/p2

[GuerreiroDF]

Hi guys.
I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580.

I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work.

How can i worked with 5 gpu?

Do you solved the problem?

[Set Ready Go]

Hi guys.
I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580.

I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work.

How can i worked with 5 gpu?

Do you solved the problem?

Tell us what system you have.

• Motherboard?
• Bios version?
• What you have done already?
• What risers and what psu that you got?
• windows version?

[GuerreiroDF]

I can not use 2 RX on the board. A bios only recognizes PCIe 16_1

Motherboard: Asus B350F-Strix
BIOS version? Version 4009 2018/04/17
What have you done?
What risers and psu do you have? No Risers. 2 RX 570. PCIe slot 16_1 and PCIe 16_2
version of windows? Windows 10 64 btis

[Set Ready Go]

I can not use 2 RX on the board. A bios only recognizes PCIe 16_1

Motherboard: Asus B350F-Strix
BIOS version? Version 4009 2018/04/17
What have you done?
What risers and psu do you have? No Risers. 2 RX 570. PCIe slot 16_1 and PCIe 16_2
version of windows? Windows 10 64 btis

Aha i see, it should work out of the box then...

do you have a ryzen cpu installed or a  7th Generation A-series/Athlon?

If you have a Ryzen installed you should be able to run at x8 + x4

If you dont have ryzen it wont work.

[GuerreiroDF]

Ryzen 5 2400.

[GuerreiroDF]

My board have:
2 x PCIe 3.0 x 16 SafeSlots (CPU)
1 x PCIe 2.0 x 16 slot (PCH)
1 x PCIe 2.0 x 1 slots (PCH)

Is it setup in bios?  You know how to do??

[Set Ready Go]

My board have:
2 x PCIe 3.0 x 16 SafeSlots (CPU)
1 x PCIe 2.0 x 16 slot (PCH)
1 x PCIe 2.0 x 1 slots (PCH)

Is it setup in bios?  You know how to do??

Try and disable on board graphics in bios

[STAT303954]

having similar issue...motherboard can see 4 gpu ok but no 5th ...ryzen 1200, 850watt psuu

[miner29]

Turn off the m.2 slots

Gen2 on slots x1 is all that is needed.

set IOMMU to ENABLE.
set VIRTUALIZATION (C1E) to DISABLE.
set POWER CONTROL (SVM) to DISABLE.
set CPU UNLOCK to ENABLE (this may prevent CPU temp from being read properly).
set COOL AND QUIET to DISABLE.
set CPU CORE CONTROL equal to the amount of CORES PER PROCESSOR for your particular CPU make/model.
set ONBOARD AUDIO/SOUND (AZALIA) to DISABLE.
set IEEE1394 to DISABLE.
set APU ONBOARD GRAPHICS to DISABLE.
set CPU FREQUENCY SCALING to DISABLE.
set CPU PERFORMANCE MODE to ENABLE.
set FAST BOOT to DISABLE.