gwlloyd
Newbie
Offline
Activity: 50
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2014, 04:42:53 PM |
|
Change to obelisk.coinkite.com:9091 or another from https://wiki.unsystem.net/en/index.php/Obelisk/ServersUsing the coinkite one I get.. sx balance 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Address: 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Paid balance: 10000000 Pending balance: 10000000 Total received: 190000000
|
|
|
|
micax1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2014, 07:31:29 PM |
|
Change to obelisk.coinkite.com:9091 or another from https://wiki.unsystem.net/en/index.php/Obelisk/ServersUsing the coinkite one I get.. sx balance 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Address: 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Paid balance: 10000000 Pending balance: 10000000 Total received: 190000000
thank you that worked for me. sometimes getting: after sx balance address quyery Assertion failed: ok (mailbox.cpp:82) Resource temporarily unavailable (signaler.cpp:236)
|
|
|
|
gwlloyd
Newbie
Offline
Activity: 50
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2014, 09:55:34 PM |
|
Change to obelisk.coinkite.com:9091 or another from https://wiki.unsystem.net/en/index.php/Obelisk/ServersUsing the coinkite one I get.. sx balance 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Address: 1Lmc3kNttoyiU2ivPLizEBhE9UvQj6rquD Paid balance: 10000000 Pending balance: 10000000 Total received: 190000000
thank you that worked for me. sometimes getting: after sx balance address quyery Assertion failed: ok (mailbox.cpp:82) Resource temporarily unavailable (signaler.cpp:236) Probably a rate limiter as it's a public server, I believe using obelisk balancer you can specify more than one public server and it will balance the queries. Whether it does auto-failover or weighted balancing I don't know off the top of my head. Or you could go back to trying to install a local obelisk server, then you wouldn't need the public ones. I'm no expert, just trying to help, give the website/docs a read.
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2014, 09:24:57 AM |
|
I'm now on my fifth attempt using 2 different servers (one a pretty much clean Debian VM and one an established server).. every time I get nearly to the end of the blockchain sync it just seems to sit around not receiving new blocks and spewing reams of errors such as below. I'm assuming blockchain database corruption but it always seems to be somewhere in the 27#### block range (I've just noticed this). Is this normal? Is there maybe something about this range of blocks, was that when someone was spamming the blockchain? Getting a bit frustrated here sapping so much time and bandwidth and still haven't got a sync'd copy to play with. I don't want to download a torrent copy.
WARNING: Error storing memory pool transaction c0c958698d61b260a885115a7e2ccec1a25c8a121c0da9ec6165f0ce11920c9b: Spent input not found
I am having this exact same issue on Ubuntu 64 (latest version) running in VirtualBox on my MacBook Pro Retina. I have 70GB of SSD and 6GB RAM allocated to the VM. The block chain has simply stopped updating at right around 300,000 block height. What solved this problem for you? I'm afraid nothing solved the problem for me, I gave it a good go but submitted defeat assuming that the h/ware I was using was too slow. I'll try again though one day when I have spare hardware in the hope that whatever caused it is solved. I'm now on my fifth attempt using 2 different servers (one a pretty much clean Debian VM and one an established server).. every time I get nearly to the end of the blockchain sync it just seems to sit around not receiving new blocks and spewing reams of errors such as below. I'm assuming blockchain database corruption but it always seems to be somewhere in the 27#### block range (I've just noticed this). Is this normal? Is there maybe something about this range of blocks, was that when someone was spamming the blockchain? Getting a bit frustrated here sapping so much time and bandwidth and still haven't got a sync'd copy to play with. I don't want to download a torrent copy.
WARNING: Error storing memory pool transaction c0c958698d61b260a885115a7e2ccec1a25c8a121c0da9ec6165f0ce11920c9b: Spent input not found
I am having this exact same issue on Ubuntu 64 (latest version) running in VirtualBox on my MacBook Pro Retina. I have 70GB of SSD and 6GB RAM allocated to the VM. The block chain has simply stopped updating at right around 300,000 block height. What solved this problem for you? I was having the same problem and I even have the same configuration with the MBP Retina. It has nothing to do with the hardware or virtualization. It has to do with the systemwide file descriptor limits. Linux limits the number of files a process can have open and how many files can be open globally. While excessively lenient of a policy, applying these settings wiil fix the issue: sysctl -w fs.file-max=409600 echo "fs.file-max=409600" >> /etc/sysctl.conf ulimit -n 409600 echo "$USER soft nofile 409600" >> /etc/security/limits.conf echo "$USER hard nofile 409600" >> /etc/security/limits.conf
|
|
|
|
HeadsOrTails
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 03:50:55 AM |
|
Can someone kindly advise me what the issue is with Ubuntu 14 LTS installation? I'm a Ubuntu newbie but have followed the instructions and running sudo bash ./install-sx.sh file from / (root) always gives this install error: checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking whether g++ supports C++11 features by default... no checking whether g++ supports C++11 features with -std=c++11... yes checking whether make supports nested variables... (cached) yes checking --enable-testnet argument... no checking for boostlib >= 1.20.0... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for SSL... yes checking for CURL... yes checking for libsecp256k1... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/bitcoin/Makefile config.status: creating src/Makefile config.status: creating libbitcoin.pc config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-libsecp256k1 Making all in include/bitcoin make[1]: Entering directory `/usr/local/src/libbitcoin-git/include/bitcoin' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/libbitcoin-git/include/bitcoin' Making all in src make[1]: Entering directory `/usr/local/src/libbitcoin-git/src' CXX utility/ec_keys.lo utility/ec_keys.cpp: In function 'libbitcoin::ec_point libbitcoin::secret_to_public_key(const ec_secret&, bool)': utility/ec_keys.cpp:66:23: error: 'secp256k1_ecdsa_pubkey_create' was not declared in this scope compressed)) ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:75:78: error: 'secp256k1_ecdsa_pubkey_verify' was not declared in this scope return secp256k1_ecdsa_pubkey_verify(public_key.data(), public_key.size()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:81:60: error: 'secp256k1_ecdsa_seckey_verify' was not declared in this scope return secp256k1_ecdsa_seckey_verify(private_key.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:115:73: error: 'secp256k1_ecdsa_pubkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_add(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:121:73: error: 'secp256k1_ecdsa_pubkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_mul(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:127:64: error: 'secp256k1_ecdsa_privkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_add(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:122:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:128:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[1]: *** [utility/ec_keys.lo] Error 1 make[1]: Leaving directory `/usr/local/src/libbitcoin-git/src' make: *** [all-recursive] Error 1 sim@ubuntu:/$ sx The program 'sx' is currently not installed. You can install it by typing: sudo apt-get install lrzsz
Everything is fine up until this point. Any help would be greatly appreciated; have literally spent 2 days trying to work this out with LTS 12 now LTS 14 (ie I'm not here as first resort, I've RTFM!) TL;DR: Ubuntu 14 LTS, how to fix this error? utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type]
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 30, 2014, 04:35:37 PM |
|
Can someone kindly advise me what the issue is with Ubuntu 14 LTS installation? I'm a Ubuntu newbie but have followed the instructions and running sudo bash ./install-sx.sh file from / (root) always gives this install error: checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking whether g++ supports C++11 features by default... no checking whether g++ supports C++11 features with -std=c++11... yes checking whether make supports nested variables... (cached) yes checking --enable-testnet argument... no checking for boostlib >= 1.20.0... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for SSL... yes checking for CURL... yes checking for libsecp256k1... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/bitcoin/Makefile config.status: creating src/Makefile config.status: creating libbitcoin.pc config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-libsecp256k1 Making all in include/bitcoin make[1]: Entering directory `/usr/local/src/libbitcoin-git/include/bitcoin' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/libbitcoin-git/include/bitcoin' Making all in src make[1]: Entering directory `/usr/local/src/libbitcoin-git/src' CXX utility/ec_keys.lo utility/ec_keys.cpp: In function 'libbitcoin::ec_point libbitcoin::secret_to_public_key(const ec_secret&, bool)': utility/ec_keys.cpp:66:23: error: 'secp256k1_ecdsa_pubkey_create' was not declared in this scope compressed)) ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:75:78: error: 'secp256k1_ecdsa_pubkey_verify' was not declared in this scope return secp256k1_ecdsa_pubkey_verify(public_key.data(), public_key.size()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:81:60: error: 'secp256k1_ecdsa_seckey_verify' was not declared in this scope return secp256k1_ecdsa_seckey_verify(private_key.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:115:73: error: 'secp256k1_ecdsa_pubkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_add(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:121:73: error: 'secp256k1_ecdsa_pubkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_mul(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:127:64: error: 'secp256k1_ecdsa_privkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_add(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:122:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:128:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[1]: *** [utility/ec_keys.lo] Error 1 make[1]: Leaving directory `/usr/local/src/libbitcoin-git/src' make: *** [all-recursive] Error 1 sim@ubuntu:/$ sx The program 'sx' is currently not installed. You can install it by typing: sudo apt-get install lrzsz
Everything is fine up until this point. Any help would be greatly appreciated; have literally spent 2 days trying to work this out with LTS 12 now LTS 14 (ie I'm not here as first resort, I've RTFM!) TL;DR: Ubuntu 14 LTS, how to fix this error? utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] I had the same issue and fixed it. Make sure you have: 1- secp256k1 installed 2- libbitcoin installed To install secp256k1: $ git clone https://github.com/bitcoin/secp256k1 $ cd secp256k1 $ ./autogen.sh $ ./configure $ make $ sudo make install
To install libbitcoin: $ git clone https://github.com/libbitcoin/libbitcoin $ cd libbitcoin $ autoreconf -i $ ./configure --enable-leveldb $ make $ sudo make install $ sudo ldconfig
You will likely need to do the following as well: $ sudo apt-get install build-essential autoconf automake libtool libboost-all-dev pkg-config libcurl4-openssl-dev libleveldb-dev libssl-dev
|
|
|
|
luv2drnkbr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2014, 07:48:00 AM |
|
Can someone kindly advise me what the issue is with Ubuntu 14 LTS installation? I'm a Ubuntu newbie but have followed the instructions and running sudo bash ./install-sx.sh file from / (root) always gives this install error: checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking whether g++ supports C++11 features by default... no checking whether g++ supports C++11 features with -std=c++11... yes checking whether make supports nested variables... (cached) yes checking --enable-testnet argument... no checking for boostlib >= 1.20.0... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for SSL... yes checking for CURL... yes checking for libsecp256k1... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/bitcoin/Makefile config.status: creating src/Makefile config.status: creating libbitcoin.pc config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-libsecp256k1 Making all in include/bitcoin make[1]: Entering directory `/usr/local/src/libbitcoin-git/include/bitcoin' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/libbitcoin-git/include/bitcoin' Making all in src make[1]: Entering directory `/usr/local/src/libbitcoin-git/src' CXX utility/ec_keys.lo utility/ec_keys.cpp: In function 'libbitcoin::ec_point libbitcoin::secret_to_public_key(const ec_secret&, bool)': utility/ec_keys.cpp:66:23: error: 'secp256k1_ecdsa_pubkey_create' was not declared in this scope compressed)) ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:75:78: error: 'secp256k1_ecdsa_pubkey_verify' was not declared in this scope return secp256k1_ecdsa_pubkey_verify(public_key.data(), public_key.size()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:81:60: error: 'secp256k1_ecdsa_seckey_verify' was not declared in this scope return secp256k1_ecdsa_seckey_verify(private_key.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:115:73: error: 'secp256k1_ecdsa_pubkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_add(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:121:73: error: 'secp256k1_ecdsa_pubkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_mul(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:127:64: error: 'secp256k1_ecdsa_privkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_add(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:122:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:128:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[1]: *** [utility/ec_keys.lo] Error 1 make[1]: Leaving directory `/usr/local/src/libbitcoin-git/src' make: *** [all-recursive] Error 1 sim@ubuntu:/$ sx The program 'sx' is currently not installed. You can install it by typing: sudo apt-get install lrzsz
Everything is fine up until this point. Any help would be greatly appreciated; have literally spent 2 days trying to work this out with LTS 12 now LTS 14 (ie I'm not here as first resort, I've RTFM!) TL;DR: Ubuntu 14 LTS, how to fix this error? utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] I had the same issue and fixed it. Make sure you have: 1- secp256k1 installed 2- libbitcoin installed To install secp256k1: $ git clone https://github.com/bitcoin/secp256k1 $ cd secp256k1 $ ./autogen.sh $ ./configure $ make $ sudo make install
To install libbitcoin: $ git clone https://github.com/libbitcoin/libbitcoin $ cd libbitcoin $ autoreconf -i $ ./configure --enable-leveldb $ make $ sudo make install $ sudo ldconfig
You will likely need to do the following as well: $ sudo apt-get install build-essential autoconf automake libtool libboost-all-dev pkg-config libcurl4-openssl-dev libleveldb-dev libssl-dev
I still get HeadsOrTails's error of "utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function" whenever I try to make libbitcoin after the configure step. Any advice or things to try?
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2014, 05:47:54 PM |
|
Can someone kindly advise me what the issue is with Ubuntu 14 LTS installation? I'm a Ubuntu newbie but have followed the instructions and running sudo bash ./install-sx.sh file from / (root) always gives this install error: checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking whether g++ supports C++11 features by default... no checking whether g++ supports C++11 features with -std=c++11... yes checking whether make supports nested variables... (cached) yes checking --enable-testnet argument... no checking for boostlib >= 1.20.0... yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for SSL... yes checking for CURL... yes checking for libsecp256k1... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/bitcoin/Makefile config.status: creating src/Makefile config.status: creating libbitcoin.pc config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-libsecp256k1 Making all in include/bitcoin make[1]: Entering directory `/usr/local/src/libbitcoin-git/include/bitcoin' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/libbitcoin-git/include/bitcoin' Making all in src make[1]: Entering directory `/usr/local/src/libbitcoin-git/src' CXX utility/ec_keys.lo utility/ec_keys.cpp: In function 'libbitcoin::ec_point libbitcoin::secret_to_public_key(const ec_secret&, bool)': utility/ec_keys.cpp:66:23: error: 'secp256k1_ecdsa_pubkey_create' was not declared in this scope compressed)) ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:75:78: error: 'secp256k1_ecdsa_pubkey_verify' was not declared in this scope return secp256k1_ecdsa_pubkey_verify(public_key.data(), public_key.size()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:81:60: error: 'secp256k1_ecdsa_seckey_verify' was not declared in this scope return secp256k1_ecdsa_seckey_verify(private_key.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:115:73: error: 'secp256k1_ecdsa_pubkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_add(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:121:73: error: 'secp256k1_ecdsa_pubkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_pubkey_tweak_mul(a.data(), a.size(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:127:64: error: 'secp256k1_ecdsa_privkey_tweak_add' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_add(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:122:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_add(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:128:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ make[1]: *** [utility/ec_keys.lo] Error 1 make[1]: Leaving directory `/usr/local/src/libbitcoin-git/src' make: *** [all-recursive] Error 1 sim@ubuntu:/$ sx The program 'sx' is currently not installed. You can install it by typing: sudo apt-get install lrzsz
Everything is fine up until this point. Any help would be greatly appreciated; have literally spent 2 days trying to work this out with LTS 12 now LTS 14 (ie I'm not here as first resort, I've RTFM!) TL;DR: Ubuntu 14 LTS, how to fix this error? utility/ec_keys.cpp: In function 'bool libbitcoin::ec_multiply(libbitcoin::ec_secret&, const ec_secret&)': utility/ec_keys.cpp:133:64: error: 'secp256k1_ecdsa_privkey_tweak_mul' was not declared in this scope return secp256k1_ecdsa_privkey_tweak_mul(a.data(), b.data()); ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_public_key(const ec_point&)': utility/ec_keys.cpp:76:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::verify_private_key(const ec_secret&)': utility/ec_keys.cpp:82:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ utility/ec_keys.cpp: In function 'bool libbitcoin::ec_tweak_add(libbitcoin::ec_point&, const ec_secret&)': utility/ec_keys.cpp:116:1: warning: control reaches end of non-void function [-Wreturn-type] I had the same issue and fixed it. Make sure you have: 1- secp256k1 installed 2- libbitcoin installed To install secp256k1: $ git clone https://github.com/bitcoin/secp256k1 $ cd secp256k1 $ ./autogen.sh $ ./configure $ make $ sudo make install
To install libbitcoin: $ git clone https://github.com/libbitcoin/libbitcoin $ cd libbitcoin $ autoreconf -i $ ./configure --enable-leveldb $ make $ sudo make install $ sudo ldconfig
You will likely need to do the following as well: $ sudo apt-get install build-essential autoconf automake libtool libboost-all-dev pkg-config libcurl4-openssl-dev libleveldb-dev libssl-dev
I still get HeadsOrTails's error of "utility/ec_keys.cpp:134:1: warning: control reaches end of non-void function" whenever I try to make libbitcoin after the configure step. Any advice or things to try? That's just a warning, you should be able to build it despite that message. If it isn't building successfully, it must be another error. To get rid of the warning, find the function and have it return something at the end.
|
|
|
|
genjix (OP)
Legendary
Offline
Activity: 1232
Merit: 1076
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 10:18:56 PM |
|
hey so just an update as to what's going on: - Obelisk has been renamed to libbitcoin-server and is undergoing lots of changes. - libbitcoin has a new faster blockchain backend. - SX is renamed to libbitcoin-explorer and has been improved. we're still working on testing & improving the software, but once that's complete, there will be a new release. sorry about all the troubles.
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2014, 10:35:52 PM |
|
hey so just an update as to what's going on: - Obelisk has been renamed to libbitcoin-server and is undergoing lots of changes. - libbitcoin has a new faster blockchain backend. - SX is renamed to libbitcoin-explorer and has been improved. we're still working on testing & improving the software, but once that's complete, there will be a new release. sorry about all the troubles.
No problem at all, we really appreciate the work that you guys put into this. Do you know when we will have access to this new release? Is it already on GitHub? Are you guys aware that obelisk-server's syncing routine stalls in certain cases? I had to write a script to make sure that obelisk processes at least 5 blocks per minute, and if that's not the case, restarts it in order to continue syncing. I suspect this is happening due to the following error that's exposed to the user: Failed to store transaction in mempool <Transaction-Hash>: Spent input not found
|
|
|
|
gwlloyd
Newbie
Offline
Activity: 50
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 05, 2014, 02:20:43 AM |
|
hey so just an update as to what's going on: - Obelisk has been renamed to libbitcoin-server and is undergoing lots of changes. - libbitcoin has a new faster blockchain backend. - SX is renamed to libbitcoin-explorer and has been improved. we're still working on testing & improving the software, but once that's complete, there will be a new release. sorry about all the troubles.
Sounds great, thank you for your hard work. I look forward to firing up the VMs again soon and trying it out.
|
|
|
|
|
inBitweTrust
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2014, 01:51:19 PM |
|
Awesome, I can't wait to start testing. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
HeadsOrTails
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 11:55:11 AM |
|
I had the same issue and fixed it. Make sure you have: 1- secp256k1 installed 2- libbitcoin installed To install secp256k1: $ git clone https://github.com/bitcoin/secp256k1 $ cd secp256k1 $ ./autogen.sh $ ./configure $ make $ sudo make install
To install libbitcoin: $ git clone https://github.com/libbitcoin/libbitcoin $ cd libbitcoin $ autoreconf -i $ ./configure --enable-leveldb $ make $ sudo make install $ sudo ldconfig
You will likely need to do the following as well: $ sudo apt-get install build-essential autoconf automake libtool libboost-all-dev pkg-config libcurl4-openssl-dev libleveldb-dev libssl-dev
I did get it to work; between this reply (which I just saw) and a question on Stack Exchange it's all up and running. I should add, while I understand these tools aren't meant to be for the complete newb, I have found them exceedingly difficult to use. Documentation scarce at best... For eg, (ie history of outputs for an address will just not work)
|
|
|
|
HeadsOrTails
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 26, 2014, 04:11:34 AM |
|
I cannot get the code from http://sx.dyne.org/offlinetx.html to run: $ DECODED_ADDR=$(cat private.key | sx addr | sx decode-addr) $ PREVOUT_SCRIPT=$(sx rawscript dup hash160 [ $DECODED_ADDR ] equalverify checksig) $ SIGNATURE=$(cat private.key | sx sign-input txfile.tx 0 $PREVOUT_SCRIPT) $ sx rawscript [ $SIGNATURE ] [ $(cat private.key | sx pubkey) ] | sx set-input txfile.tx 0 > signed-tx $ sx showtx signed-tx hash: 4a8be467fb75f0f757649348dbb05762142236ec236ac9e55e4683d7083ffca2 version: 1 locktime: 0 Input: previous output: 97e06e49dfdd26c5a904670971ccf4c7fe7d9da53cb379bf9b442fc9427080b3:1 script: [ 304602210083f8b5131f6399cdc01ed8368f6137f288f771e40834a94d65cee6b380fec873022100da5ed6d1d283f228752a88c2d6f629587b2a6fbc102202ae7c20f48af7c0533c01 ] [ 04e3af7cdfaab6ba2f14001a7ea0a490f40c6ba43607be92a05111d2e8fc1eecf6fa2c248b3e25ddf7db081684f6f49dc83fd7b9b5a3a88a2e6b83b918f8972351 ] sequence: 4294967295 address: 134HfD2fdeBTohfx8YANxEpsYXsv5UoWyz Output: value: 90000 script: dup hash160 [ 18c0bd8d1818f1bf99cb1df2269c645318ef7b73 ] equalverify checksig address: 13Ft7SkreJY9D823NPm4t6D1cBqLYTJtAe Error returned is similar to (haven't got it in front of me): sx set-input FILENAME N SIGANDPUBKEYSCRIPT Running sx set-input txfile.tx 0 `cat rawscript.tx` or even sx set-input txfile.tx 0 4730...... (where 4730 is the sig/pubkey script) ... it won't workAny advice? TL;DR: sx rawscript [ $SIGNATURE ] [ $(cat private.key | sx pubkey) ] | sx set-input txfile.tx 0 > signed-tx This code from the eg doesn't work (and variants of it)
|
|
|
|
Altoidnerd
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2014, 06:24:20 AM |
|
This seems odd. I cannot understand why sx seems to disagree with vbuterin/pybitcointools ( https://github.com/vbuterin/pybitcointools) If you need to install pybitcointools do $ git clone https://github.com/vbuterin/pybitcointools $ cd pybitcointools $ chmod +x setup.py $ ./setup.py install
I am not getting the same result for simple sha256 hashes from pybitcointools and sx. See: $ python >>> from bitcoin import * >>> x=sha256('ok') >>> x '2689367b205c16ce32ed4200942b8b8b1e262dfc70d9bc9fbc77c49699a4f1df' >>>quit() $
sx gives something else...or am i stupid? $ sx sha256 ok 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d $ sx sha256 'ok' 6e340b9cffb37a989ca544e6bb780a2c78901d3fb33738768511a30617afa01d
Why?
|
|
|
|
Altoidnerd
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 08, 2014, 06:27:39 AM Last edit: December 08, 2014, 07:15:50 AM by Altoidnerd |
|
Heres the kicker... $ echo -n "ok" | openssl dgst -sha256 2689367b205c16ce32ed4200942b8b8b1e262dfc70d9bc9fbc77c49699a4f1df
edit - issue opened here https://github.com/spesmilo/sx/issues/95
|
|
|
|
brituspol
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 458
Merit: 250
From nothing to nothing
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2015, 03:18:25 PM |
|
Checking this out today. Very interesting. Good luck to the creator.
|
|
|
|
ziomik
Legendary
Offline
Activity: 1960
Merit: 1012
SELL bitcoinmarket.net | bitcoinitalia.com SELL
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2015, 08:33:18 AM |
|
mmm.. --> Updating libbitcoin...
Current branch version1 is up to date.
--> Beginning build process now....
Si è già su 'version1' Your branch is up-to-date with 'origin/version1'. configure: error: cannot find install-sh, install.sh, or shtool in "." "./.." "./../.."
|
DOMINI IN VENDITA/NOLEGGIO bitcoinmarket.net | bitcoinitalia.com
Contattatemi pure per info. ---- +++ ---- "Se domani senti due massaie che parlano di bitcoin tra di loro dal macellaio, forse e' il momento di vendere.. se pero' le sentirai fra 10 anni forse staranno solo pagando il conto" GBianchi ---- +++ ----
|
|
|
|