OC settings for 1070 ti

[sufyan]

Hello,

I would like to get best OC settings for gigabyte 1070 ti. Please share you MSI settings. Thank you.
 

[0xcosmos]

it depends on your vga memory vendor
install gpuz and check if your memory vendor is samsung or hynix or micron
if you have samsung +150 core +600 memory
if you have hynix +150 core +100 memory
if you have micron +150 core +400 memory

[gt_addict]

Dude. There are loads of threads about OC settings and there isnone about the 1070ti specifically. Try reading the other posts before cluttering up the forum with superfulous questions.

[gotminer]

Hello,

I would like to get best OC settings for gigabyte 1070 ti. Please share you MSI settings. Thank you.
 

Return your Gigabyte and get a real 1070ti.  Gigabyte cards are the dogshit of Nvidia.  You would know that if you had done a bit of reading.

[scred]

Hi gotminer,

What about MSI GTX 1070Ti Armor ?

Thanks

[sufyan]

Hello,

I would like to get best OC settings for gigabyte 1070 ti. Please share you MSI settings. Thank you.
 

Return your Gigabyte and get a real 1070ti.  Gigabyte cards are the dogshit of Nvidia.  You would know that if you had done a bit of reading.

didn't know that I can't return now I have to deal with this .

[sufyan]

it depends on your vga memory vendor
install gpuz and check if your memory vendor is samsung or hynix or micron
if you have samsung +150 core +600 memory
if you have hynix +150 core +100 memory
if you have micron +150 core +400 memory

Thank you for suggestion currently my settings are 100% Power , +200 core and +700 Memory

[gt_addict]

Crank yoiur power down to 65-70 and see how stability goes. Increase by 5% until stable

[gotminer]

Hello,

I would like to get best OC settings for gigabyte 1070 ti. Please share you MSI settings. Thank you.
 

Return your Gigabyte and get a real 1070ti.  Gigabyte cards are the dogshit of Nvidia.  You would know that if you had done a bit of reading.

didn't know that I can't return now I have to deal with this .

I've personally never had one.  I say that because I've read about many people having fan issues with them.

[philipma1957]

Hi gotminer,

What about MSI GTX 1070Ti Armor ?

Thanks

armor cards suck

[sufyan]

Crank yoiur power down to 65-70 and see how stability goes. Increase by 5% until stable

Thank you for reply. If I lower down my power to 50% it works fine and stable but get low H/s then currently mining Mona coin lyra2rev2 algo on 100 pwr + 200 core + 700 memory getting 44-46 MH/s.

[gt_addict]

Your hashrate will suffer a little but its finding the balance point between electricity consumption and hashrate. As with all the threads about any card you need to experiment yourself.

After i said about reducing power to 65-70 you took it to 50?? These cards are rubbish below 60%. Hence why i suggested 65-70% which ive personally found to be stable running +800 mem on micron memory cards.

[QuintLeo]

https://bitcointalk.org/index.php?topic=2377787.0;all

 Post 22

 Same settings SHOULD work on the Gigabyte 1070 ti - but I refuse to buy any more Gigabyte cards except PERHAPS Aorus models due to their JUNK FANS.

[gotminer]

https://bitcointalk.org/index.php?topic=2377787.0;all

 Post 22

 Same settings SHOULD work on the Gigabyte 1070 ti - but I refuse to buy any more Gigabyte cards except PERHAPS Aorus models due to their JUNK FANS.

I knew I read that somewhere.  Just couldn't remember where ... Lol.  Honestly, I had some on back order earlier in the week and cancelled the order after I saw that post and several others.

[captainplauze]

Be careful though as cards will react differently to OC in all environments, humidity, room temperature and etcetera can affect the performance and you will have to find your own settings

[gotminer]

Hi gotminer,

What about MSI GTX 1070Ti Armor ?

Thanks

armor cards suck

Hopefully the GeForce FTW2 cards don't suck, because I have 6 of them coming on Friday.

[QuintLeo]

My only issues with the EVGA FTW models are:

 1) 2 power connectors makes it harder to get enough power to them in a many-card setup
 2) higher cost than the SC model.

 Otherwise they should work the same as the SC - I don't think the cooling is enough better IF at all for them to boost noticeably higher at "efficient" settings, though they might crank out a few more hash than the SC if you push them to 160+ watts.

 Armor cards don't suck, in my limited experience with them - but the cooling is NOT all that good given the HUGE fans and overall SIZE of the bloody things.
 They don't seem to cool quite as well as the EVGA SC models, though close, and they DO cool better than the Zotac mini models.

[gotminer]

My only issues with the EVGA FTW models are:

 1) 2 power connectors makes it harder to get enough power to them in a many-card setup
 2) higher cost than the SC model.

 Otherwise they should work the same as the SC - I don't think the cooling is enough better IF at all for them to boost noticeably higher at "efficient" settings, though they might crank out a few more hash than the SC if you push them to 160+ watts.

 Armor cards don't suck, in my limited experience with them - but the cooling is NOT all that good given the HUGE fans and overall SIZE of the bloody things.
 They don't seem to cool quite as well as the EVGA SC models, though close, and they DO cool better than the Zotac mini models.

Two power connectors?  Same as my Vega 56's?  They require two 8-pin's, if I'm not mistaken.  Between two EVGA 1000W Gold's, I had everything I needed in the box to power my six gpu Vega 56 rig.

[PovertyByte]

Hello,

I would like to get best OC settings for gigabyte 1070 ti. Please share you MSI settings. Thank you.
 

Return your Gigabyte and get a real 1070ti.  Gigabyte cards are the dogshit of Nvidia.  You would know that if you had done a bit of reading.

How is Zotac AMP?

[Makak4R]

I have two units of Palit Dual, I actually removed the coolers and set waterblocks instead, so my stats can't be compared with some air cooled cards, but anyhow I want to share it. So my OC settings are
PL is 90%
Core + 208
Mem + 315
these setting I'm using for neoscrypt and if I'm mine something without high memory usage I use -502 mem instead