[ANN] [NO-ICO] [0% PREMINE] CREPCOIN: Friendly web environment crypto!

[crepcoin]

Hello everyone!

I got an old PC (Intel Q9550, 4GB DDR2, Radeon 5770 1GB GDDR5, Windows 10).

Can I mine with it?

Hi,

Yes, XMR-STAK should be work for you. You can find link and pools here: http://www.crepcoin.org/pools.php

Regards

Thanks for the response.

I'm a bit confused with the multiple pools and stratum/ports. Which one should I choose?

at this moment two better options are:

- http://crep.cnotepool.info: high hashrate and 3% fee (I set up high fees in order to redirect some traffic to other pools). You will get more payments, but they will be small, according to your hashrate.
- http://crep.miner.rocks: low hashrate and 0% fee. You can get less payments (around 2 hours for mining a block) but your reward will be greater.

Also, keep in mind your balance will not increased until blocks will be confirmed (1 hour approx.).

Regards

[cryptosize]

Hello everyone!

I got an old PC (Intel Q9550, 4GB DDR2, Radeon 5770 1GB GDDR5, Windows 10).

Can I mine with it?

Hi,

Yes, XMR-STAK should be work for you. You can find link and pools here: http://www.crepcoin.org/pools.php

Regards

Thanks for the response.

I'm a bit confused with the multiple pools and stratum/ports. Which one should I choose?

at this moment two better options are:

- http://crep.cnotepool.info: high hashrate and 3% fee (I set up high fees in order to redirect some traffic to other pools). You will get more payments, but they will be small, according to your hashrate.
- http://crep.miner.rocks: low hashrate and 0% fee. You can get less payments (around 2 hours for mining a block) but your reward will be greater.

Also, keep in mind your balance will not increased until blocks will be confirmed (1 hour approx.).

Regards

Thanks again.

Where do I register for the 2nd pool?

Also, my GPU says it cannot allocate enough memory (1GB GDDR5 VRAM is not enough for Cryptonight/Crepcoin?) on xmr-stak.

Sorry for the noob questions, just trying to figure things out!

[Blurps]

Binary release without source code. For a crypto currency. Are you serious...

[crepcoin]

Binary release without source code. For a crypto currency. Are you serious...

Not. It's because we uploaded source to github: https://github.com/crepcoin/crepcoin

Patience is a good friend.

Regards

[crepcoin]

Hello everyone!

I got an old PC (Intel Q9550, 4GB DDR2, Radeon 5770 1GB GDDR5, Windows 10).

Can I mine with it?

Hi,

Yes, XMR-STAK should be work for you. You can find link and pools here: http://www.crepcoin.org/pools.php

Regards

Thanks for the response.

I'm a bit confused with the multiple pools and stratum/ports. Which one should I choose?

at this moment two better options are:

- http://crep.cnotepool.info: high hashrate and 3% fee (I set up high fees in order to redirect some traffic to other pools). You will get more payments, but they will be small, according to your hashrate.
- http://crep.miner.rocks: low hashrate and 0% fee. You can get less payments (around 2 hours for mining a block) but your reward will be greater.

Also, keep in mind your balance will not increased until blocks will be confirmed (1 hour approx.).

Regards

Thanks again.

Where do I register for the 2nd pool?

Also, my GPU says it cannot allocate enough memory (1GB GDDR5 VRAM is not enough for Cryptonight/Crepcoin?) on xmr-stak.

Sorry for the noob questions, just trying to figure things out!

You need to create a wallet first.

For that, you can download the software, sync daemon and create a wallet with simple wallet. Or you can create one wallet online (don't forgot your address and password, and download wallet to your computer on first session for more security): https://wallet.crepcoin.org

Once you have an address, you can download xmr-stak-cpu precompiled from here: https://github.com/fireice-uk/xmr-stak/releases

When you downloaded and unziped it, you need to edit config.txt file, and change pool address and wallet address, just like this:

"pool_address" : "crep.miner.rocks:3333",
"wallet_address" : "YOUR WALLET ADDRESS HERE",
"pool_password" : "",

Then, start xmr-stak.exe

Regards

[cryptosize]

Hello everyone!

I got an old PC (Intel Q9550, 4GB DDR2, Radeon 5770 1GB GDDR5, Windows 10).

Can I mine with it?

Hi,

Yes, XMR-STAK should be work for you. You can find link and pools here: http://www.crepcoin.org/pools.php

Regards

Thanks for the response.

I'm a bit confused with the multiple pools and stratum/ports. Which one should I choose?

at this moment two better options are:

- http://crep.cnotepool.info: high hashrate and 3% fee (I set up high fees in order to redirect some traffic to other pools). You will get more payments, but they will be small, according to your hashrate.
- http://crep.miner.rocks: low hashrate and 0% fee. You can get less payments (around 2 hours for mining a block) but your reward will be greater.

Also, keep in mind your balance will not increased until blocks will be confirmed (1 hour approx.).

Regards

Thanks again.

Where do I register for the 2nd pool?

Also, my GPU says it cannot allocate enough memory (1GB GDDR5 VRAM is not enough for Cryptonight/Crepcoin?) on xmr-stak.

Sorry for the noob questions, just trying to figure things out!

You need to create a wallet first.

For that, you can download the software, sync daemon and create a wallet with simple wallet. Or you can create one wallet online (don't forgot your address and password, and download wallet to your computer on first session for more security): https://wallet.crepcoin.org

Once you have an address, you can download xmr-stak-cpu precompiled from here: https://github.com/fireice-uk/xmr-stak/releases

When you downloaded and unziped it, you need to edit config.txt file, and change pool address and wallet address, just like this:

"pool_address" : "crep.miner.rocks:3333",
"wallet_address" : "YOUR WALLET ADDRESS HERE",
"pool_password" : "",

Then, start xmr-stak.exe

Regards

I have already created a local wallet. I guess there's no need for registration in the pool?

Apparently xmr-stak doesn't seem to work with my GPU (CPU is OK, but not sure about its hashrate). Only Claymore v9.7 seems to be compatible with Radeon HD 5770 (pre-GCN, VLIW5 uarch), but it's not recommended (?) in the pool.

[miner.rocks]

Apparently xmr-stak doesn't seem to work with my GPU (CPU is OK, but not sure about its hashrate). Only Claymore v9.7 seems to be compatible with Radeon HD 5770 (pre-GCN, VLIW5 uarch), but it's not recommended (?) in the pool.

Claymore has issues, that is why it is not recommended, but it is not prohibited, so you can use it.

[DemLom]

I really enjoy this project, since it can be used without having a super cool smartphone that is not for everyone ... I would like more information

[crepcoin]

I have already created a local wallet. I guess there's no need for registration in the pool?

No, registration is no needed. You only need wallet address to start mining, and pool send payments directly to your address.

[olanin12]

Can someone post their config file for xmr-stak.exe     I can't get mine to work, it just tries to use the gpu and not the cpu and closes.

[cryptosize]

Unfortunately I get the following error with Claymore v9.7:

Code:

Stratum - reading socket failed 0, disconnect
 Job timeout, disconnect, retry in 20 sec...
server: bind failed with error: 10048 (port is busy, use different -mport value), next attempt in 10sec...

Any idea how to fix it?

[sikkar]

Download the latest claymore edition.
https://github.com/nanopool/Claymore-XMR-Miner/releases

[soixantedix]

update from discord announcement news:
- Downloads: https://www.crepcoin.org/download.html
- Mining pools:  http://www.crepcoin.org/pools.php

[cryptosize]

Download the latest claymore edition.
https://github.com/nanopool/Claymore-XMR-Miner/releases

The latest claymore is not compatible with Radeon 5770.

[Kenway]

Can someone post their config file for xmr-stak.exe     I can't get mine to work, it just tries to use the gpu and not the cpu and closes.

why cann't mining ,any tips from software?

[epooler]

Can someone post their config file for xmr-stak.exe     I can't get mine to work, it just tries to use the gpu and not the cpu and closes.

why cann't mining ,any tips from software?

Hi,

For cpu mining I'm using: https://github.com/fireice-uk/xmr-stak-cpu/releases

config.txt:

"cpu_threads_conf" :
[
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 },
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
],
"use_slow_memory" : "warn",
"nicehash_nonce" : false,
"aes_override" : null,
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
"pool_address" : "crep.cnotepool.info:3333",
"wallet_address" : "youraddresshere",
"pool_password" : "",
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,
"verbose_level" : 3,
"h_print_time" : 60,
"daemon_mode" : false,
"output_file" : "",
"httpd_port" : 0,
"prefer_ipv4" : true,

[crepcoin]

You can set up number of cores here:

Code:

"cpu_threads_conf" :
[
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 0 }, # core 1
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 }, # core 2
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 2 }, # core 3
     { "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 3 }, # core 4
      # ...etc
],

You can run one core for each 2Mb cache from your cpu.

Regards

[crepcoin]

We have another pool:

http://crep.hashblocks.top

Thanks for your support!

[Grandifer]

Your exchange doesn't work. I can't create an account

[crepcoin]

Your exchange doesn't work. I can't create an account

https://exchange.crepcoin.org/register.php

Is working fine. I created an account for test just right now...