ASUS 1070 Dual OC really bad hash rate

[westy666]

Guys, I'm stuck on this one.

I have a 3 card rig.

Zotac GTX1070
Asus GTX 1070 (8bg Dual OC version)
Gigiabyte GTX 1060

I'm using Awsome miner to mine on MPH and afterburner for the clocks.

The Zotac 1070 and the Gigabyte 1060 seem to be hashing about where I'd expect, but can't get the Asus GTX1070 anywhere near.

As an example on equihash using zec miner I'm getting 465 sols from the Zotac with a +50 core and a +650 mem and power limit of 70. The best I can get from the Asus is 276 sols with a +100 core and +700 mem with 100% power. Tried all sorts of core\memory\power\temp combo's.

By comparison the GTX 1060 I'm getting 291 sols with a 100/400 setting.

I know the Zotac and the Giga have Samsung memory and the Asus is Micron, but I'd expect to get the Asus hashing a bit closer to the Zotac, and a lot better than the 1060, not worse.

Temps on the card are ~65deg which is 5 deg under the 70 temp limit I have set.

I'm running latest Nvidia drivers (388.71), done a clean install. It also was the same on an older version of the driver as well. The card also has the latest BIOS.

On AB the core and mem actual clocks between the two 1070's are about the same, so the Asus isn't getting throttled from it's OC settings.

Any ideas as I'm stumped ? Any diags I can run on the card to see if there are any faults ?

Thanks
Steve

[westy666]

OK sorted it. I'm being a dumb ass.

It was google remote desktop.

[gt_addict]

How did remote desktop affect it? A mis read or running it caused the hashrate drop?

[Ryuh]

Probably running it, because I noticed when i use teamviewer some remote machine, one of the cards drops a bit of hashrate.
It happens all the time.

[westy666]

How did remote desktop affect it? A mis read or running it caused the hashrate drop?

It was when I was connected to the rig from my other machine. If I logged out of the remote session and just used the keyboard and an attached monitor the hash went up to near the other 1070.

[millsys]

Should be using onboard video...

[westy666]

Should be using onboard video...

Thanks I'll give that a go.