LTCRabbit.com X11 mining - earn LTC with 40% less energy

[Blisk]

There might be a problem with DNS resolution at your location. Please try this stratum URL: 128.65.210.241:3332

thanks I will try and let you know

[Blisk]

no, stil doesn't working.
This is what I get

50:59] Kernel x11mod is experimental.                   
[15:51:23] Probing for an alive pool                   
[15:51:23] Pool 0 slow/down or URL or credentials invalid                   
[15:51:33] Waiting for work to be available from pools.                   
[15:51:33] Setting GPUs to idle performance.                   
[15:52:23] No servers were found that could be used to get work from.                   
[15:52:23] Please check the details from the list below of the servers you have input                   
[15:52:23] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers                   
[15:52:23] Pool: 0  URL: http://128.65.210.241:3332  User: XXXX  Password: XXXXX                   
[15:52:23] No servers could be used! Exiting.     

[ppanther]

Please remove the http from the stratum url:

sgminer.exe -k x11mod -o x11.backup.ltcrabbit.com:3332 ...

[Blisk]

I have put back backup server withouth http, now miner connect but don't get any shares if I use x11mod kernel but with darkcoin kernel works.
What can be problem for no accepted shares?


[18:44:43] Kernel x11mod is experimental.                    
[18:45:10] Probing for an alive pool                    
[18:45:10] Pool 0 difficulty changed to 0.001                    
[18:45:11] Network diff set to 3.51K                    
(5s):227.3K (avg):578.5Kh/s | A:0  R:0  HW:0  WU:0.000/m          
(5s):367.7K (avg):579.2Kh/s | A:0  R:0  HW:0  WU:0.000/m          
(5s):406.0K (avg):540.6Kh/s | A:0  R:0  HW:3  WU:0.000/m          
(5s):520.4K (avg):579.3Kh/s | A:0  R:0  HW:4  WU:0.000/m          
(5s):544.0K (avg):579.4Kh/s | A:0  R:0  HW:5  WU:0.000/m          
(5s):523.0K (avg):565.2Kh/s | A:0  R:0  HW:6  WU:0.000/m          
(5s):578.4K (avg):579.6Kh/s | A:0  R:0  HW:8  WU:0.000/m          
(5s):579.0K (avg):579.6Kh/s | A:0  R:0  HW:8  WU:0.000/m          
(5s):579.4K (avg):579.7Kh/s | A:0  R:0  HW:9  WU:0.000/m          
(5s):532.8K (avg):567.9Kh/s | A:0  R:0  HW:9  WU:0.000/m          
(5s):597.5K (avg):579.6Kh/s | A:0  R:0  HW:10  WU:0.000/m          
(5s):590.5K (avg):579.6Kh/s | A:0  R:0  HW:11  WU:0.000/m          
(5s):550.4K (avg):572.9Kh/s | A:0  R:0  HW:12  WU:0.000/m          
 

[Blisk]

I have reinstall catalyst drivers now it works ok.
But still sgminer closes sometimes and when I open it again it works.
Why sgminer crash?

[Mr_Snipes]

Hi,
i hope you have a hint for me - the miner does not work with my R290X.
I have tried to reinstall catalyst, to change the parameters and i test-installed win7 on another disk - it just won't work.
What i get is the same issue as Blisk - but i do not have http in the name.
The drivers used are the newest beta-drivers.  The software works on another machine which has a HD6870.

It calculates but it the wu-value is on 0.0 Bild "sgminer-test9is4j.png" anzeigen.

Using Gpu-Z i can see that there is 100% load on GPU as well.

My parameters are default
.\sgminer\sgminer.exe -k x11mod -o x11.ltcrabbit.com:3332 -u user.machine -p password -I 18 -g 2 -w 256 --thread-concurrency 8192 --lookup-gap 2 --vectors 1

[Blisk]

I found out that some just doesn't work with k11mod so I changed that one into darkcoin.
Also after I changed lmost all from darkcoin to k11mod there is no difference in hashrate, it is almost the same and not like it was mentioned it will be 30% more.

[Blisk]

Is power consumption and heating with x11mod the same like with scrypt or not?
If someone knows?

Also have a problem with two miners, graphic on board is disabled in bios.

1] ADL found less devices than opencl!
1] There is possibly more than one display attached to a GPU
1] Use the gpu map feature to reliably map OpenCL to ADL
1] WARNING: Number of OpenCL and ADL devices did not match!
1] Hardware monitoring may NOT match up with devices!


cgminer have switch --disable-adl but not sgminer.

What to do?

[Blisk]

I solve this one problem is because I used RDP, with teamviewer this is gone.

Now I see that with scrypt mining i have 99% invalid shares, someone can tell why is that?

[Mr_Snipes]

you probably have the intensity too high - that was it for me.

[Blisk]

you probably have the intensity too high - that was it for me.

NO, because that are Asics. I think it is problem with pool DNS I changed name to IP and now invalid shares dropping.

[Blisk]

Today I have 145% invalid shares in scrypt mining

[Blisk]

Every day I get this from time to time
No servers could be used! Exiting.

[onunez177]

I'm using 1.3 Fury by GAW Miners can you help me out with the right setting . I know is something like
cgminer.exe --scrypt -o stratum+tcp:// not sure .com:3333 -u Worker  -p password  --nocheck-golden --chips-count 128 --ltc-clk 280 -S //./COM9
I try scrypt.ltcrabbit.com but it didn't work any subjection what I'm doing wrong.

NEW: US stratum server

Our stratum mining server:
eu.ltcrabbit.com:3333 (Europe)
us.ltcrabbit.com:3333 (USA)

US miners are now able to connect to our local US stratum server, allowing optimal mining and minimum stales.

[realcyberghost]

@realcyberghost

Thank you for your suggestion. Currently X11 earnings are added to the credit_pps transactions. We will fire up an additional earning type and earning graph soon, allowing you to differentiate between scrypt and x11 earnings.

Hey again.

Any ETA on this? Because I would love to point my X11 mining at LTCRabbit again.
And while you are at it, would you consider payout for X11 in Darkcoin?
And finally would you consider a Bitcoin payout option?

Meanwhile Scrypt mining at LTCRabbit runs smoothly and worry free.
I love the Scrypt altcoin bonus system.

Regards

[thawgyi]

what is minimum Pay Out, eg : If I have 0.03LTC Can I withdraw ?
 

[toptek]

Ive had a ticket in for a while now for a request to have my pin reset , I lost that info when my PC crashed a month or so back  .. can anyone help me from LTCrabbit  please i can  prove who iam  pst .



wow who the hell is admin for rabbit does he or she even exist, or does some one just log in to make sure the server are letting us hash then collect the fees then log and  does not bro with pin reset or customers at all ? 

[dmz241]

what is minimum Pay Out, eg : If I have 0.03LTC Can I withdraw ?
 

Its 1 ltc

[ppanther]

LTCRabbit user Eugene created a new iOS app that really kicks ass!



https://itunes.apple.com/app/id918735251


Features:
1. Scans your QR code (LTCRabbit => my account => mobile)
2. Displays worker performance on the overview page
3. Overview feature, tap LTC amount to convert to USD
4. Overview feature, drag and swipe over earnings chart for more details
5. Worker overview, view current hashrate and status
6. Worker overview, delete workers
7. Worker overview, add new workers
8. LTCRabbit shoutbox

App is not free as beer, but 0.99 USD is really worth it and goes directly to the developer!

[dmz241]

Hey guys I have been running with you guys for like 2 or 3 days. What I cant seem to find is what your payouts are per 24hr per 1mhs vs ltc direct mining. This way we can judge how good you guys are. I am in support of the fact that you convert to ltc and I believe for a healthy system we need all scrypt miners to demand ltc instead of btc.