Hello,
please forgive me if this topic has already been covered. I've spent two days on the forums and internet attempting to solve this problem myself with no luck.
I'm currently running 8 GIGABYTE RX 580 4G AORUS GPUs and have Bios modded all of them with Polaris Bios Editor v1.6.6. This version has the Auto Configure Button. It auto copied all the 1:5000 timing straps to the higher values.
When I first got the cards running in SMOS. I was only getting 18-19 Mh/s and after the bios mod they were 22-23 Mh/s. I then over clocked them in SMOS and changed the GPU from 1375 to 1475 and the memory from 1750 - 2085 and the powerstaging from 6 to 7. After overclocking, I am getting a solid 25 Mh/s mining Ethereum using claymore-eth-v10.2 in SMOS.
Is this as good as it gets? I've seen multiple people claiming to get 29-31 Mh/s using 4g RX580 cards, most are Samsung memory but I've read about people being successful with Elpida memory as well.
Any help would be greatly appreciated.
Thanks!
sell elpidamemory card, try to get samsung/hynix...will save you alot headache