Let's compare Avalon's cgminer status page

[btcxyzzz]

Received my Avalon few days ago, installed it with almost no hassle. I can say software seems to be very good, still I lack some knowledge about numbers I get about how well it works... Someone please check them and also you can post your's... I have 20130607 firmware installed. I don't know if it's needed to get it updated...

time elapsed: ~ 11 hrs 26 mins
MHsav: 62633 (cpu freq is on moderate)
foundblocks: 0
getworks: 878
accepted: 9561
rejected: 166
discarded: 1691
stale: 0
getfailures: 0
localwork: 632388
remotefailures: 1
networkblocks: 87
totalMH: 2.580017e+09
WU: 884.6
diffA: 589917
diffR: 6340
diffS: 0
bestshare: 764954


Temp2 sensor shows -1, and I guess it's not working, but it's not a thread to malfunction of chips or it is?

I'm most worried about discarded number, but actually I don't really know if the numbers above are normal...

[BenTuras]

Most important are your results on your pool.
Second comes HW errors, which is just a waste of energy. HW should be less 2%
Handy little mod I made: https://bitcointalk.org/index.php?topic=254331
Max. temp should be around 50 (Avalon B1 & B2) or 70 (B3). Cut off temp should be 60/80.

But really, you should read the Avalon ASIC user thread from start to finish: https://bitcointalk.org/index.php?topic=140539.0

[Ytterbium]

Why aren't you overclocking?  You're leaving 20Ghash on the table, around 20%

Also, as far as I can tell discarded shares aren't hashed, so they don't affect your hashrate. 

[btcxyzzz]

Please continue discussion here: https://bitcointalk.org/index.php?topic=270214.0