BernoulliS
Newbie
Offline
Activity: 36
Merit: 0
|
|
February 18, 2014, 12:19:50 AM |
|
Will a GPU ever work on this coin? I am very interested in it.
Yes, it is scrypt-jane algorithm with Nfactor 14. Be careful to choose your cgminer. How to mine this? I tried various scrypt-jane cgminers on it (the ones for CACH, ULtracoin, the ZZMiner published on 115.28.143.200) but none seems to work, most of them either fail or shows HW errors only
|
|
|
|
zccoin (OP)
|
|
February 19, 2014, 10:01:25 PM |
|
Will a GPU ever work on this coin? I am very interested in it.
Yes, it is scrypt-jane algorithm with Nfactor 14. Be careful to choose your cgminer. How to mine this? I tried various scrypt-jane cgminers on it (the ones for CACH, ULtracoin, the ZZMiner published on 115.28.143.200) but none seems to work, most of them either fail or shows HW errors only You could config nStartTime and Nfactor for some cgminers, otherwise you should use cgminer specified for ZCC as below: https://app.box.com/s/cw6ho3vtwxcvy5f75p64
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
lenovothinkpad
Full Member
Offline
Activity: 143
Merit: 100
quickpay
|
|
February 22, 2014, 04:22:31 PM |
|
watching
|
AE the RealWay BTC:1NJtnYSyTs2Xy1pJqSEW7sdCW2SvJkzdZV LTC:LdkZMrhQBSWK1NoYfjqx8J7viAbUxZCzMC
|
|
|
my_veles123
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 22, 2014, 06:27:26 PM |
|
how i can configure zcc miner with new pref?
and...any1 have working Miner for zcc and .bat?
|
|
|
|
zccoin (OP)
|
|
February 22, 2014, 07:28:12 PM |
|
how i can configure zcc miner with new pref?
and...any1 have working Miner for zcc and .bat?
The ZCC cgminer and 7850 conf are as below: https://app.box.com/s/cw6ho3vtwxcvy5f75p64Currently it is about 2K hashrate for 7850 because Nfactor=14
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
my_veles123
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 23, 2014, 01:21:38 AM |
|
how i can configure zcc miner with new pref?
and...any1 have working Miner for zcc and .bat?
The ZCC cgminer and 7850 conf are as below: https://app.box.com/s/cw6ho3vtwxcvy5f75p64Currently it is about 2K hashrate for 7850 because Nfactor=14 can u give me plz .bat file with working command?
|
|
|
|
my_veles123
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 23, 2014, 01:33:39 AM |
|
how i can configure zcc miner with new pref?
and...any1 have working Miner for zcc and .bat?
The ZCC cgminer and 7850 conf are as below: https://app.box.com/s/cw6ho3vtwxcvy5f75p64Currently it is about 2K hashrate for 7850 because Nfactor=14 can u give me plz .bat file with working command? like this cgminer.exe --scrypt -o stratum+tcp://wk1.niehu.com:5555 -u zzzz -p x or cgminer.exe --Nfmin 12 --Nfmax 30 --StartT 1375817223 --scrypt -o stratum+tcp://zccoin.miners-point.com:3385 -u Weblogin.Worker -p Worker password or something like that, all this commands dont working =(, cgminer dont starting or have only HW errors
|
|
|
|
zccoin (OP)
|
|
February 23, 2014, 02:14:39 AM |
|
how i can configure zcc miner with new pref?
and...any1 have working Miner for zcc and .bat?
The ZCC cgminer and 7850 conf are as below: https://app.box.com/s/cw6ho3vtwxcvy5f75p64Currently it is about 2K hashrate for 7850 because Nfactor=14 can u give me plz .bat file with working command? like this cgminer.exe --scrypt -o stratum+tcp://wk1.niehu.com:5555 -u zzzz -p x or cgminer.exe --Nfmin 12 --Nfmax 30 --StartT 1375817223 --scrypt -o stratum+tcp://zccoin.miners-point.com:3385 -u Weblogin.Worker -p Worker password or something like that, all this commands dont working =(, cgminer dont starting or have only HW errors Cause Nfactor=14, the intensity should be relatively low and carefully tuned. You could refer the following cgminer.conf file for HD7850 2GB: { "pools" : [ { "url" : "stratum+tcp://zcc.niehu.com:3334", "user" : "zccoin.1", "pass" : "x" } ] , "intensity" : "11", "vectors" : "1", "worksize" : "64", "kernel" : "scrypt", "lookup-gap" : "5", "thread-concurrency" : "68000", "shaders" : "0", "gpu-engine" : "850", "gpu-fan" : "70", "gpu-memclock" : "1000", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-port" : "4028", "api-listen" : true, "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "1", "hotplug" : "5", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "60", "scrypt" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
zccoin (OP)
|
|
February 23, 2014, 02:18:53 AM |
|
Thanks very much for you charts. I will donate you if you have ZCC address.
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
zccoin (OP)
|
|
February 23, 2014, 09:48:30 PM |
|
Thanks very much for you charts. I will donate you if you have ZCC address. Sure! I have ZK9kY2R1ii3cG4HKbkyY7QWe2QsCZjtjE3 200 ZCC sent. Thanks for your support.
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
zvs
Legendary
Offline
Activity: 1680
Merit: 1000
https://web.archive.org/web/*/nogleg.com
|
|
February 27, 2014, 04:02:48 AM |
|
Charts are nice and all, but on bter.com can't even withdraw since 'ZCC withdrawal is disabled due to blockchain fork. ZCC 因网络分叉问题,暂停提取,稳定后开放。'. Fork, where? It looks like one pool has 90% of the hashing power.
|
|
|
|
zccoin (OP)
|
|
February 27, 2014, 04:31:23 PM |
|
Charts are nice and all, but on bter.com can't even withdraw since 'ZCC withdrawal is disabled due to blockchain fork. ZCC 因网络分叉问题,暂停提取,稳定后开放。'. Fork, where? It looks like one pool has 90% of the hashing power. ZCC forked around two months ago, and bter has not recovered withdraw. However, it will some time later, and cryptsy/btc38 is OK now.
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
milkox
Member
Offline
Activity: 84
Merit: 10
|
|
March 06, 2014, 04:26:45 PM |
|
Hi all I want to mine ZCC but i cant with my cpu !!!
I downloaded the minerd created for scrypt jane!
I wanted to start it and share are not accepted it says
0/1 accepted (xx kh/s) (boooo!)
i read some forums how to set it!
I tired to set Ntime and etc but when i add that arguments in the .bat file the minerd pop up and then close....
I dont know how to mine now this coin, i cant find a guide or something like that. NOBODY wants to say how to mine theese coinsss.....
|
|
|
|
|
gavrilo77
|
|
March 25, 2014, 11:36:00 AM Last edit: March 25, 2014, 03:51:50 PM by gavrilo77 |
|
HI, i started to mine ZCcoin, found very interesting. I have problem with GPU miner, i have a lot HW errors. Tried with low intensity I 9, hash ~ 2 kh/s, tried with I 11, hash ~5 kh/s the same HW errors. In 5 min i have got HW 35. For example when i use cgminer 3.7.2 for Lite coin i dont have any problem with HW errors even with I 19. My card is 7770 HD My conf: "intensity" : "11", "vectors" : "1", "worksize" : "256", "kernel" : "scrypt", "lookup-gap" : "0", "thread-concurrency" : "8000", "shaders" : "640", "gpu-engine" : "1050", "gpu-fan" : "0", "gpu-memclock" : "1250", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "0", "temp-target" : "0", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "1", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "30", "scrypt" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" http://www.imagebam.com/image/5d4a2c316535757Thank you for advice I tried to mine trough pool. It says Pool difficulty 4, my Best Share for example 84 and nothing happen. No Accept no Reject
|
|
|
|
zccoin (OP)
|
|
March 30, 2014, 04:41:54 PM |
|
ZcCoin is based on scrypt-jane and Yacoin with Nfactor, therefore, LTC miner will not work and intensity should be low to avoid HW. The normal hashrate for 7850 2G is 2.x K for your information. HI, i started to mine ZCcoin, found very interesting. I have problem with GPU miner, i have a lot HW errors. Tried with low intensity I 9, hash ~ 2 kh/s, tried with I 11, hash ~5 kh/s the same HW errors. In 5 min i have got HW 35. For example when i use cgminer 3.7.2 for Lite coin i dont have any problem with HW errors even with I 19. My card is 7770 HD My conf: "intensity" : "11", "vectors" : "1", "worksize" : "256", "kernel" : "scrypt", "lookup-gap" : "0", "thread-concurrency" : "8000", "shaders" : "640", "gpu-engine" : "1050", "gpu-fan" : "0", "gpu-memclock" : "1250", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "0", "temp-target" : "0", "api-port" : "4028", "expiry" : "120", "gpu-dyninterval" : "7", "gpu-platform" : "0", "gpu-threads" : "1", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "30", "scrypt" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" http://www.imagebam.com/image/5d4a2c316535757Thank you for advice I tried to mine trough pool. It says Pool difficulty 4, my Best Share for example 84 and nothing happen. No Accept no Reject
|
ZcCoin Donation: ZVX7namJi8CinMQbFruzHA27eW53qTznXW
|
|
|
klinmaining
Member
Offline
Activity: 98
Merit: 10
|
|
April 07, 2014, 12:47:20 PM |
|
help bat file add to 280x
|
|
|
|
itraxe
Sr. Member
Offline
Activity: 264
Merit: 252
alt coins trader/miner.
|
|
April 07, 2014, 04:11:51 PM |
|
280x
"api-allow" : "W:192.168.8.131,127.0.0.1", "api-listen" : true, "scrypt-chacha" : true, "worksize" : "256", "rawintensity" : "6411", "buffer-size" : "2656", "lookup-gap" : "2", "auto-fan" : true, "temp-target" : "73", "temp-overheat" : "80",
"gpu-engine" : "1080", "gpu-mclock" : "1500",
"gpu-powertune" : "20",
"nfmin" : "12", "nfmax" : "30", "starttime" : "1375817223",
"temp-cutoff" : "85", "gpu-threads" : "1", "queue" : "0", "scan-time" : "1", "thread-concurrency" : "16384", "no-submit-stale" : true, "expiry" : "10" }
15khs
duno how to get more
|
|
|
|
Thirtybird
|
|
April 07, 2014, 04:39:25 PM |
|
If I'm not mistaken, Zcc is on N=14 now, so that config file posted is not going to work well any longer. The following is for YACMiner - which is geared for mining coins with high N Factor https://github.com/thirtybird/yacmineryacminer --scrypt-chacha --worksize 128 -g 1 --lookup-gap 8 --buffer-size 2590 -R 5120 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --nfmin 12 --nfmax 30 --starttime 1375817223 or try this if you only have 4 GB memory yacminer --scrypt-chacha --worksize 128 -g 2 --lookup-gap 8 --buffer-size 1295 -R 2560 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --nfmin 12 --nfmax 30 --starttime 1375817223 If you're over 4 KH/sec with those settings, you're in the ballpark. The higher the buffer-size you can allocate, the higher you can set -R.
|
|
|
|
moke
Member
Offline
Activity: 72
Merit: 10
|
|
April 07, 2014, 10:26:23 PM |
|
bump!
|
|
|
|
|