[ANN] [ICO] [MINEABLE] PINKSTAR 90% ICO 5% MINEABLE 5% BOUNTY

[PinkStar]

TOPIC CLOSED

[PetrovichCoinMaster]

Hello. Why only 5% are reserved for mining? How much time approximately will be mined all the coins?

[manfromafar]

Source?

[PinkStar]

5% to get a small reward to confirm transactions (This is an ICO currency). All coins will be available in about 10 years

Source https://github.com/Jachi84/pinkstar


I'm having problems with block 349 proof of work too weak, starting the daemon from the PINKSTAR-CONF folder with the configuration file, this problem does not occur.
Today I will work to try to solve the problem, if it will take me a short time, today I will create the social profiles. Stay tuned  

[PinkStar]

UPDATE

Do not use the downloads published yesterday, if you have downloaded the files, delete them and install the new ones (the download links and instructions have been updated).
WINDOWS
Delete the pinkstar folder in AppData / roaming
LINUX
Open the terminate from the desktop and type rm -R .pinkstar/

I apologize for the inconvenience and with those who have undermined, that you lose the reward because the blocks have been reset. I had to publish the ANN right away to avoid github names as it happened with another coin.

Now everything is OK!

Translated GOOGLE TRANSLATE

[bad name]

blockreward 0.02
 

[sorinslv]

C:\Users\Sorin\Downloads\pinkstar-windows\pinkstar-windows>miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M

so no mining why?

it doesnt do nothing when i press enter, its all good until miner.

[bad name]

C:\Users\Sorin\Downloads\pinkstar-windows\pinkstar-windows>miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M

so no mining why?

it doesnt do nothing when i press enter, its all good until miner.

readcarefully
 

[sorinslv]

daemon is synced and open, wallet is ok and open but when i go to that folder and put miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M in cmd doesnt work

[DOUBLEKAY11]

I'm thinking the arrangement for the presentation here looks untidy. Why not tidy up first.

[sorinslv]

C:\Users\Sorin\Downloads\pinkstar-windows\pinkstar-windows>miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M

so no mining why?

it doesnt do nothing when i press enter, its all good until miner.

readcarefully
 

what i did wrong could you tell me?

[cryptoRX]

Quoting for images

PinkStar 95% ICO 5% MINEABLE

COIN SPECIFICATIONS
NAME: PINKSTAR
ABBREVIATION: PNKS
ALGORITHM: CRYPTONIGHT
TOTAL COINS: 1.200.000,0000000000 PNKS
DECIMAL POINT: 8
PRINTS: 95% (1.140.000,0000000000 PNKS)
ICO SALE: 1.139.000,00000000 PNKS (1.000,00000000 reserved for the creator)
MINING COINS: 60.000,0000000000 PNKS
EMISSION SPEED FACTOR: 21
DIFFICULTY TARGET: 60 (1 Block every 60 seconds)
REWARD FOR BLOCK: 0.02860894 (the reward decreases with each block)
FEE: 0.01000000 PNKS
SOURCE CODE: https://github.com/Jachi84/pinkstar

PINKSTAR (PNKS) was born from the bifurcation of the BYTECOIN code, allowing to send completely anonymous transactions

setting the level of anonymity at the time of the transaction from level 0 to level 25.
PINKSTAR is a rare pink diamond, I chose this name because even PNKS is rare, there will be around

only 1.200.000 coin, hoping that in the future as well as the name, the color, also buy a lot of value.
Why did I choose to reward 95% and sell them as ICO? Because the PINKSTAR project still needs a lot

development, VPS server to run nodes, advertising, exchanges; the funds accumulated through the sale of PINKSTAR over

that for the things already said, will be used for a new currency, with a total of higher coins (Q3 2018) that will be

created according to the requests of the community, in which there will be a 10% premine that will be divided to the participants

ICO.

ROAD MAP
Q1 2018
Creation page TWITTER, INSTAGRAM, FACEBOOK
Implementation of ram in 2 seed nodes at 4GB (currently 1 GB of RAM)
Adding 3 more seed nodes
Website
Blockexplorer
Purchase of PC MAC to compile the code and create the WALLET for MAC
Q2 2018
WALLET GUI WINOWS, LINUX, MAC
Contact with exchanges to add PINKSTAR (If required, paying the fee)
Advertising (Sponsorship in social networks)
Q3 2018
Possibility to purchase products or services on the website by paying with PINKSTAR (PNKS)
Make PNKS known to traders and encourage them to accept it as a payment method
Creation of a new high-emission currency to be agreed with the community, 10% of the currency will be reserved

who bought PINKSTAR PNKS during the ICO phase.
Then buy PINKSTAR PNKS from 10 January 2018, by sending an email to pinkstarico@outlook.it,

specifying the desired quantity, the chosen payment method (BTC, LTC, BCN), the PNKS address.

I advise you to use a valid email, as it will be used in Q3 2018 after the creation of the new currency, for

send you a preview of the wallets to create an address and send your quota.
 
Each PNKS has a value of 0.00010 (Example 1.000 PNKS 0,10BTC).
The wallets are command line and are available for WINDOWS and LINUX


WINDOWS http://download1596.mediafire.com/u9matqwro9tg/lxsi7dgh7rdzbml/pinkstar-windows.zip
Unzip the pinkstar-windows folder
With the command prompt (cmd), open the pinkstar-windows folder (eg cd pinkstar-windows press ENTER)
 - pinkstard.exe --config-file configs/pinkstar.conf press ENTER to complete the synchronization always close typing exit Keep DEMON open to use WALLET and MINER
 - simplewallet.exe --config-file configs/pinkstar.conf press ENTER G and press ENTER to generate a new address
 - miner.exe --address YourAddressPNKS and press ENTER

LINUX http://download1851.mediafire.com/feajfv31w7pg/wdog4zxm4d9ea6u/pinkstar-linux.tar.gz
Unzip the pinkstar-linux folder
Enter the pinkstar-linux folder
Open the terminal inside the folder
 - Type ./pinkstard --config-file configs/pinkstar.conf press ENTER to complete the synchronization always close typing exit Hold DEMON open to use WALLET and MINER
 - ./simplewallet --config-file configs/pinkstar.conf press ENTER (WALLET) G and press ENTER to generate a new address
 - ./miner --address YourAddressPNKS and press ENTER.

Translation GOOGLE TRANSLATE

[amirm]

daemon is synced and open, wallet is ok and open but when i go to that folder and put miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M in cmd doesnt work

There seems to be a space in your address!
The other thing is make sure the daemon rpc port is correct. The default one is 8081, I think. Check your daemon to find the right port, and use the option --daemon-rpc-port to set it to the actual port.

[sorinslv]

daemon is synced and open, wallet is ok and open but when i go to that folder and put miner.exe --address P5ezMvXAZXzS7G9hafX1o5C6N3s54eSxy6VbVeoCJyELFiiXKMxobUcfBfc9SxQh2CMPahTzLRpkrYL oohLAFuCP2os8cwi9M in cmd doesnt work

There seems to be a space in your address!
The other thing is make sure the daemon rpc port is correct. The default one is 8081, I think. Check your daemon to find the right port, and use the option --daemon-rpc-port to set it to the actual port.

address its ok now but nothing change the cpu is sleeping to say and doesnt do nothing when i press enter

and daemon take info from conf file

p2p-bind-port=28475
rpc-bind-port=28476

[SenthirCilik]

Is this coin only available for mining?
What about some bounty campaign, will there any?

[amirm]

Is this coin only available for mining?
What about some bounty campaign, will there any?

It would be nice if DEV would be willing to give away 10% of his/her reserved coins for bounty campaign, for this to succeed.

[Mlester]

Is this coin only available for mining?
What about some bounty campaign, will there any?

For now, it seems like it's just available for mining only.
But in the near future, I'm also hoping that they will also held some campaing here.

[tonitram]

I am having the same problem as sorinslv.  Node works fine, wallet works fine.. but miner is not working for me.. can anybody please help?

[PinkStar]

Miner is working correctly, you can see the blocks extracted with relative reward on simplewallet, try to leave active at least 2 hours, if you do not receive anything, do not waste energy and resources for this.
I'm thinking of moving the ICO sales date to February 10, to allocate 90% to the ICO sale and as a move to 5% of the coins to the bounty campaign. Today I have not had time to create social profiles and for this I need a little more time.

[PinkStar]

A message appeared, then deleted, where it was written that today the blocks were restored.
No restoration has been performed, as everything is working properly, in case of problems and need of maintenance, checkpoints will be used to avoid losing the mined PNKS