[CLOSED] batch #20/21 .31 - .35 btc for USB miners & 10.25 blades - USA only

[west17m]

Canary, check my PM for clarifications.  I'll be around tonight.

[1714834113]

1714834113

[dresdenreader]

346.2 kilos arriving tomorrow... yeah, they're gonna make special delivery with 1 van... LOL

that's 763.24 pounds of ASIC goodies

Your neighbors probably think you're building a secret lab in your basement.

[movellan]

movellan; 56; 18.2; 1Dv6pAXoA8G21CLWkwnEGpLsVQmcXZLY4n

Signed message sent and verified. Thanks again.

[jshinra]

Group is closed for ordering with tomorrow's shipping.  further orders will be moved to the next group.

Aahh.. missed out waiting for my btcQuick limit to reset.. oh well.

[philipma1957]

Love it! It's a race now between my new hub and the usbs! Here's to 1 day delivery after canary ships (optimistic!).

TJ

My USB hub won the race. I waited to order until confirmation from Canary.

I went with the GearMo. It looks so lonely right now with just a fan in it and a USB data stick I threw in just to test.
http://www.amazon.com/gp/product/B00BZABGWK/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

 


as a heads ups  it reads a 12v 3 amp brick   that is about  a 7 or 8 stick max.   

Not sure about that, saw that this had actually been reviewed by some people here that 10 spots out of 10 were usable. Not too worried for me personally though since I only ordered 7 and a fan from amazon.

never used it but all my 10 port hubs with 10 sticks using a 12 volt 4 amp brick killed the bricks after 2 weeks of run time.  I have a lot of spare 12 volt 5amp bricks and they worked great.  Your gear is 12 volt 3 amp but the markings or ratings are not what count.  for all I know my 12 volt 4amp bricks were less then your 12 volt 3amp brick.  I have found this brick works well

http://www.amazon.com/gp/product/B000VE7GQQ/ref=oh_details_o05_s01_i00?ie=UTF8&psc=1   I have 1 of these

as does this one

http://www.power-guide.com/pdf/SPU50.pdf    meanwell spu50-3

  I can't find these any more I have 8 or 9 from other projects these are very good if you can find them.

[jcrew]

jcrew; 2; .70; f606ab999a42d7cafad969c8d5f4bb3112d

I probably figured out what I was doing too late, but next time I will calm down, read more thoroughly and focus on comprehension over panic.

[CanaryInTheMine]

Group is closed for ordering with tomorrow's shipping.  further orders will be moved to the next group.

Aahh.. missed out waiting for my btcQuick limit to reset.. oh well.

I usually end up with a few extra's after everything gets shipped out (reserves)... I'll re-asses tomorrow night to see where we stand, and it's likely we'll have a limited amount of inventory available, but not a guarantee.

[gektek]

Group is closed for ordering with tomorrow's shipping.  further orders will be moved to the next group.

Aahh.. missed out waiting for my btcQuick limit to reset.. oh well.

I usually end up with a few extra's after everything gets shipped out (reserves)... I'll re-asses tomorrow night to see where we stand, and it's likely we'll have a limited amount of inventory available, but not a guarantee.

hehe...ya, I would be curious as well. Finally managed to get an order in but since I was only able to afford one for now I got it through the Eligius website. Point being I've no clue...well...of anything really, hahahaha. I got the automated reply saying my order was received, sent payment to the address the site gave me. That was earlier today but then I see that orders closed earlier today too. We'll see Anywho, is there anyway to confirm I did the payment part right at least?

Thanks much!!!!!

[jshinra]

Group is closed for ordering with tomorrow's shipping.  further orders will be moved to the next group.

Aahh.. missed out waiting for my btcQuick limit to reset.. oh well.

I usually end up with a few extra's after everything gets shipped out (reserves)... I'll re-asses tomorrow night to see where we stand, and it's likely we'll have a limited amount of inventory available, but not a guarantee.

Alright, sounds good! I'll keep an eye on this thread tomorrow and hope =)

[CanaryInTheMine]

Group is closed for ordering with tomorrow's shipping.  further orders will be moved to the next group.

Aahh.. missed out waiting for my btcQuick limit to reset.. oh well.

I usually end up with a few extra's after everything gets shipped out (reserves)... I'll re-asses tomorrow night to see where we stand, and it's likely we'll have a limited amount of inventory available, but not a guarantee.

hehe...ya, I would be curious as well. Finally managed to get an order in but since I was only able to afford one for now I got it through the Eligius website. Point being I've no clue...well...of anything really, hahahaha. I got the automated reply saying my order was received, sent payment to the address the site gave me. That was earlier today but then I see that orders closed earlier today too. We'll see Anywho, is there anyway to confirm I did the payment part right at least?

Thanks much!!!!!

Eligius orders will be processed too... Plus Eligius will have inventory on hand as well for quite a while..

[CanaryInTheMine]

Landed in US 

[Plesk]

Landed in US 

I can feel the hashing power approaching.

[MikeMike]

Landed in US 

I can feel the hashing power approaching.

May the Hashing Be With You!
 

[Plesk]

Landed in US 

I can feel the hashing power approaching.

May the Hashing Be With You!
 

Who would have thought SHA-256 could be so exciting and sexy?

These blades are gonna be sweeeeeeet!

[ElideN]

this is good, bitcoin prices are going up...

[visdude]

visdude; 1; .34; 1AjQVZFmFRnwzomJPcAHBZhZoNUxPgTAqG

This is in addition to an existing order for a total of 4.

[finlof]

Love it! It's a race now between my new hub and the usbs! Here's to 1 day delivery after canary ships (optimistic!).

TJ

My USB hub won the race. I waited to order until confirmation from Canary.

I went with the GearMo. It looks so lonely right now with just a fan in it and a USB data stick I threw in just to test.
http://www.amazon.com/gp/product/B00BZABGWK/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

 


as a heads ups  it reads a 12v 3 amp brick   that is about  a 7 or 8 stick max.   

Not sure about that, saw that this had actually been reviewed by some people here that 10 spots out of 10 were usable. Not too worried for me personally though since I only ordered 7 and a fan from amazon.

never used it but all my 10 port hubs with 10 sticks using a 12 volt 4 amp brick killed the bricks after 2 weeks of run time.  I have a lot of spare 12 volt 5amp bricks and they worked great.  Your gear is 12 volt 3 amp but the markings or ratings are not what count.  for all I know my 12 volt 4amp bricks were less then your 12 volt 3amp brick.  I have found this brick works well

http://www.amazon.com/gp/product/B000VE7GQQ/ref=oh_details_o05_s01_i00?ie=UTF8&psc=1   I have 1 of these

as does this one

http://www.power-guide.com/pdf/SPU50.pdf    meanwell spu50-3

  I can't find these any more I have 8 or 9 from other projects these are very good if you can find them.

these usb miners draw 5V x 0.5A each, so the total draw is 2.5VA.  if the brick is really a 12V 3A then it can output 36VA, which is plenty of power for 10 usb miners (2.5VA x 10 = 25VA).  that is assuming the brick is really rated at that.

[CanaryInTheMine]

delivered.  unpacking.  DHL did send 1 van for my delivery as i suspected... 
packing and shipping.  won't be able to reply to PMs for a while.

[guytechie]

delivered.  unpacking.  DHL did send 1 van for my delivery as i suspected... 
packing and shipping.  won't be able to reply to PMs for a while.

A whole van dedicated just for you, huh?  Gotta makes you feel special!  You know what would be cool?  A photo of the huge shipment.

Of course, then we'll expect you to get packing!

[CanaryInTheMine]

So the blades are not in a single box like they were previously sold.  each one consists of 3 boxes for each component and a separate power connector and a separate fuse.

packing is going to be longer than thought...

as a result, local pickups are not going to happen today.  probably tomorrow.

back to shipping, i won't be able to respond to PMs for a while today.