Namecoin Bitparking Pool mining errors

[JBDive]

I thought I would set this up just to make sure I understood what was going on however I am getting the following errors on a regular basis then they will go away and my shares go up:


2011-07-09 00:31:15: Listener for "bitparking - namecoin" started
2011-07-09 00:32:43: Listener for "bitparking - namecoin": Verification failed, check hardware!
2011-07-09 00:33:00: Listener for "bitparking - namecoin" shutting down

[1713969823]

1713969823

[1713969823]

1713969823

[TeraPool]

Try mining solo? The namecoin difficulty isn't THAT bad... yet.

If your miners are saying "verification failed, check hardware" however... I assume you are overclocking them too much.

What cards do you have and how much have you overclocked them?

[cryptomint]

Do you have this issue with other pools?

I was getting a ridiculous amount of stale shares at bitparking (>10%).

I went solo for a while because of the problems.

I just started a new namecoin pool if you're interested in trying it out. No fee during the first week.

[twobits]

Do you have this issue with other pools?

I was getting a ridiculous amount of stale shares at bitparking (>10%).

I went solo for a while because of the problems.

I just started a new namecoin pool if you're interested in trying it out. No fee during the first week.

Seems to need some work, I went to it and it says 'Welcome, drew!' and gives me an option to logout,  though it is my first visit ever.

[cryptomint]

Do you have this issue with other pools?

I was getting a ridiculous amount of stale shares at bitparking (>10%).

I went solo for a while because of the problems.

I just started a new namecoin pool if you're interested in trying it out. No fee during the first week.

Seems to need some work, I went to it and it says 'Welcome, drew!' and gives me an option to logout,  though it is my first visit ever.

Thank you for posting this. I shut the website off for a moment. Doesn't affect mining.

Give me a namecoin address, I'll send you some coin.

[twobits]

Thank you for posting this. I shut the website off for a moment. Doesn't affect mining.

Give me a namecoin address, I'll send you some coin.

Ah nice, will be my first namecoin.   N6Si7xRzjVtjoHCZB9FQTRFeDhvrxfBqLe

[cryptomint]

Ah nice, will be my first namecoin.   N6Si7xRzjVtjoHCZB9FQTRFeDhvrxfBqLe

Enjoy!

[Stupidpal]

Do you have this issue with other pools?

I was getting a ridiculous amount of stale shares at bitparking (>10%).

I went solo for a while because of the problems.

I just started a new namecoin pool if you're interested in trying it out. No fee during the first week.

Seems to need some work, I went to it and it says 'Welcome, drew!' and gives me an option to logout,  though it is my first visit ever.

It's still showing that. :S

[cryptomint]

It's still showing that. :S

I fixed this

Pretty damn embarrassing.

Send me a namecoin address and I'll ship a couple coins your way.

[thph]

Hi all
i try to connect 4 miners.
can they use the same namecoin as username or do i need a different one for each miner ?
i work with windows and guiminer oder phoenix bat file

THANKS FOR THE ANSWERS

[doublec]

can they use the same namecoin as username or do i need a different one for each miner ?

On the bitparking pool, same namecoin address for all miners is fine.

[thph]

Mmhhh
when 1 connect 1 miner - it works - in 10 minutes the hashrate moves between 150 and 230 on the stat page (phoenix says 270)
As soon i connect more than 1 miner the stat page show me 0.
Also after 20 minutes an 2 different blocks, ( looks like it goes always on zero when a new block start.)

So is there any chance to configurate something wrong ?

I use the same phoenix bat on all computers, its a copy, and phoenix shows me that the connection is OK and the accepted shares and rejected shares (20/1)

THANKS

[doublec]

Also after 20 minutes an 2 different blocks, ( looks like it goes always on zero when a new block start.)

Block rate shown by the pool is just an estimate. It drops to zero when a block is found as it starts the calculation again. I don't keep historical information of shares needed to keep the calculation active to save disk space.