XMR Stak miner 2.2.0 with colorscheme, inline shares + total hasrate, 0% dev fee

[poNgz0r]

So i have been running this for a few days on a ryzen 5 1600 hovering about 490-510 H/s ,  seems rock solid.
Mining ETH on the rx 480.

Cool! Glad to hear that. Im planning on a slightly extra feature. Personally i use the web output a lot http://77.160.234.222:16000/h
The things that bothers me is that i cant find my wallet address in here so im planning on adding the wallet address in web output. Sometimes i want to double check my coins on the pool and i don't have always my wallet address at hand so therefor i want it to show up in the web output.

[Set Ready Go]

Hers screenshot how it looks for me.

[MagicSmoker]

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

[rednoW]

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

ryzen 5 1600 can do even better

[MagicSmoker]

ryzen 5 1600 can do even better

That's what I have! Me and @Set Ready Go exchanged several PMs about tweaks to the CPU.txt file and without his help I would still be hashing away at 360-380 H/s!

[Set Ready Go]

[545 H/s]
Hers screenshot how it looks for me.

Holy frijoles, you are leaving me and my Ryzen in the dust! Guess I need to get Ryzen Master and see if I can catch up!

ryzen 5 1600 can do even better

@rednoW
Uff 600+  
Sweet man what thread config have you got on xmr stak ?
i use 1/3/4/5/7/9/10/11

[rednoW]

@rednoW
Uff 600+  
Sweet man what thread config have you got on xmr stak ?
i use 1/3/4/5/7/9/10/11

My 8-thread config differs from yours but with your config I have the same 624h/s

[niobio-pool]

If anyone wants to run xmr-stak without dev fee from Docker, here is how:

https://niobio-pool.com/dl/README.txt

- Docker (Linux or Mac OSX hosts)

# Linux
docker run -it --rm --device /dev/dri:/dev/dri -v $PWD:/cfg rig1/xmr-stak
# Mac OSX
docker run -it --rm -v $PWD:/cfg rig1/xmr-stak

See more about Docker at: https://hub.docker.com/r/rig1/xmr-stak/

- All versions available for download (Windows, Mac and Linux):

https://niobio-pool.com/dl/

[Spill]

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

[niobio-pool]

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

run like this:

xmr-stak --noNVIDIA --noAMD

[Set Ready Go]

How do i get this miner to ignore my RX480/vegas and just mine with the cpu(ryzen 7)
I dont see were to edit the config file?

You change the parameters in the start-electroneum.bat

if you are mining electroneum then its already set to not use your amd cards.

Code:

:start
timeout 45
xmr-stak -c electroneum.txt --noAMD
goto start

[Azrael777]

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???

https://s17.postimg.org/v7d43xcyn/2018-02-20_08-04-09.png


Thx

[Set Ready Go]

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???




Thx

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending  what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

[Azrael777]

Hi

I noticed something while mining.
If i mine with CPU only i get my Hashrate, but when I add GPU, I do not get the hashrate.

Any suggestions???

https://s17.postimg.org/v7d43xcyn/2018-02-20_08-04-09.png


Thx

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending  what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

[MagicSmoker]

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending  what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

@Set Ready go says he has an Nvidia GTX 750 Ti; his nvidia.txt configuration isn't going to be terribly useful for your AMD card...

The easiest thing to do is to run xmr-stak from the command line without any parameters and it will prompt you to enter currency type (either Monero for most Cryptonote coins, or AEON for AEON), pool address and your wallet address. It will then create cpu.txt and either amd.txt or nvidia.txt automatically. Once you have those you can then tweak them to improve performance.

[Azrael777]

What gpu are you using?
I had the same problem with a gtx 750ti, cpu was hashing along but gpu not.
For me it was the configuration for the gpu that was the problem.

So depending  what gpu you got change the parameters in the nvidia config or the AMD config, depends what gpu you got.

Hi

I'm using an AMD Radeon card.
Which parameters did you change in your config file?

Thx

@Set Ready go says he has an Nvidia GTX 750 Ti; his nvidia.txt configuration isn't going to be terribly useful for your AMD card...

The easiest thing to do is to run xmr-stak from the command line without any parameters and it will prompt you to enter currency type (either Monero for most Cryptonote coins, or AEON for AEON), pool address and your wallet address. It will then create cpu.txt and either amd.txt or nvidia.txt automatically. Once you have those you can then tweak them to improve performance.

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

[MagicSmoker]

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

Look for the parameter in the main config file (config.txt by default) called:

"verbose_level" : 3,

and change the 3 to a 4. That will print out a hashrate report every 60 seconds.

[Azrael777]

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

Look for the parameter in the main config file (config.txt by default) called:

"verbose_level" : 3,

and change the 3 to a 4. That will print out a hashrate report every 60 seconds.

I have done that, and the output is shown in the picture that I originally attached to my post.

[MagicSmoker]

I have done that, and the output is shown in the picture that I originally attached to my post.

Likely your card is not supported, then, or badly misconfigured in amd.txt as a result of your attempts at tweaking. A common cause of the GPU not being used is incorrectly setting the platform index (choice is either 0 or 1, AFAIK), but xmr-stak generally picks the correct one if you let it.

Also, you were asked to specify your card but all you replied was, "AMD Radeon" - at risk of pointing out the obvious, that is not a specific card...

[Set Ready Go]

@MagicSmoker

I do understand that nvidia & amd is different, the question is what do you "tweek" to display the Hashrate?
I did modify some values in the amd.txt file but Hashrate is still not displaying.

Thx

Look for the parameter in the main config file (config.txt by default) called:

"verbose_level" : 3,

and change the 3 to a 4. That will print out a hashrate report every 60 seconds.

I have done that, and the output is shown in the picture that I originally attached to my post.

Yo.

what specific amd card do you have?

a few examples for you:

r9 380 - try setting "intensity" : 760, "worksize" : 7

rx 470 -  INTENSITY 1024, WORKSIZE 8

basically try out some diffrent intensity and worksize options and see if you wont begin to get some hashrate reports.