Avalon 741 Miner Stats

[caxibrema]

Anyone is an expert on what cgminer API for stats(https://pastebin.com/ctH3jfuq) returns for avalon 741?

I am particularly trying to find the following 2 things:
1) Hardware error rate
2) Something equivalent to bitmains asic info (The o's, x's, -'s)

[fanatic26]

Neither of those are stats that the Avalons track. If there is a failed chip on the Avalon board it will show up as an error code. HW errors can pretty much be safely ignored as well as there is nothing you can do about them.

[caxibrema]

Good to know. The error codes I got them from https://github.com/Canaan-Creative/avalon7-docs/wiki/AvalonMiner-error-code so I think I am good to go 

[fanatic26]

Remember the error codes are additive. For example if you have an error 32 and an error 8 it will show as error 40.

The easiest way to check codes is through their query tool. It will list all applicable codes.

https://canaan.io/downloads/query_a7_ec_status.html

[caxibrema]

Remember the error codes are additive. For example if you have an error 32 and an error 8 it will show as error 40.

The easiest way to check codes is through their query tool. It will list all applicable codes.

Right! They are bit or. I was automating this for an open source project but It should be pretty straightforward to do this from python. https://github.com/anselal/antminer-monitor

[skljoc]

Remember the error codes are additive. For example if you have an error 32 and an error 8 it will show as error 40.

The easiest way to check codes is through their query tool. It will list all applicable codes.

https://canaan.io/downloads/query_a7_ec_status.html

Hello, can you please guide me to where I can see the error codes showing?

Thanks

[fanatic26]

Remember the error codes are additive. For example if you have an error 32 and an error 8 it will show as error 40.

The easiest way to check codes is through their query tool. It will list all applicable codes.

https://canaan.io/downloads/query_a7_ec_status.html

Hello, can you please guide me to where I can see the error codes showing?

Thanks

They are right on the cgminer status page in the bottom right corner.

[skljoc]

Remember the error codes are additive. For example if you have an error 32 and an error 8 it will show as error 40.

The easiest way to check codes is through their query tool. It will list all applicable codes.

https://canaan.io/downloads/query_a7_ec_status.html

Hello, can you please guide me to where I can see the error codes showing?

Thanks

They are right on the cgminer status page in the bottom right corner.

It seems there arent any. Am I missing something? Here is a screenshot

https://i.imgur.com/vvtRXRK.png

[caxibrema]

It seems there arent any. Am I missing something? Here is a screenshot

https://i.imgur.com/vvtRXRK.png

I think you have to click in the CGMiner API log tab

[skljoc]

It seems there arent any. Am I missing something? Here is a screenshot

https://i.imgur.com/vvtRXRK.png

I think you have to click in the CGMiner API log tab

Still nothing. I have attached a screenshot again.

https://i.imgur.com/mirMoiig.jpg

[Steamtyme]

It seems there arent any. Am I missing something? Here is a screenshot

https://i.imgur.com/vvtRXRK.png

I think you have to click in the CGMiner API log tab

Still nothing. I have attached a screenshot again.

https://i.imgur.com/mirMoiig.jpg

From what I can see you do not have any errors.

They show up in the API log under ECHU and ECMM.

[skljoc]

It seems there arent any. Am I missing something? Here is a screenshot

https://i.imgur.com/vvtRXRK.png

I think you have to click in the CGMiner API log tab

Still nothing. I have attached a screenshot again.

https://i.imgur.com/mirMoiig.jpg

From what I can see you do not have any errors.

They show up in the API log under ECHU and ECMM.

Can you tell me how are they labeled ?

[Steamtyme]

They are labelled as ECHU and ECMM

You need to look at your API log, the one you posted a pic of. Scroll down through the list until you see those listed along the left side of the screen.

Here is a link to the codes

https://github.com/Canaan-Creative/avalon7-docs/wiki/AvalonMiner-error-code

[skljoc]

They are labelled as ECHU and ECMM

You need to look at your API log, the one you posted a pic of. Scroll down through the list until you see those listed along the left side of the screen.

Here is a link to the codes

https://github.com/Canaan-Creative/avalon7-docs/wiki/AvalonMiner-error-code

Thanks heaps. I think I managed to find some errors on other controllers. Cheers

[Steamtyme]

NP