[ANN][P2Pool] Check Out P2Pool.org - 30 coins and counting!

[merk5_0]

Seem to be having a lot of trouble with GDC, can't connect, any news on that front?

I give up on Grandcoin for now.

Every time P2Pool submits a block to the client it kills the client and P2Pool can't get more work.

I will continue to look for a solution to this issue.

Seems everyone is having the same trouble with GDC... From another pool:

"Warning: There is ongoing problems with communication between stratum and the Grandcoin client which is causing intermittent errors submitting some found blocks to the Grandcoin client. The issue can be seen here:
https://github.com/moopless/stratum-mining-litecoin/issues/48

If you continue to mine Grandcoin on this pool, please take these issues into consideration. We will be trying to find a solution over the coming days."

[1715018507]

1715018507

[Jude Austin]

There are now block explorers for all of the coins on P2Pool.org!

To view the block explorer of a certain coin just go to this URL and replace <abbreviation> with the 3 letter abbreviation in capitals of the coin you want:

http://p2pool.org/<abbreviation>/BlockCrawler/index.php

For example you want to view the Quarkcoin block explorer you would go here:

http://p2pool.org/QRK/BlockCrawler/index.php

I will be integrating the explorers into P2Pool and also into the stats page under an Explorer tab.

Happy Mining!

[merk5_0]

Next 3 = PHS, GLX, GLC?

[Jude Austin]

Next 3 = PHS, GLX, GLC?

I have to find someone who can make those for me.

I would love to add them.

I just don't have the abilities.

I tried adding GalaxyCoin but the client crashes and has an alert message stating it is out of data.

GlobalCoin I can take a look at.

What is PHS based off of?

I might be able to make it work.

[Jude Austin]

Updating the Litecoin client for P2Pool.org!

Compiling then switching over.

Sorry for the down time if any.

*UPGRADE COMPLETE*

P2Pool.org is now using the latest version of Litecoind.

[merk5_0]

Next 3 = PHS, GLX, GLC?

I have to find someone who can make those for me.

I would love to add them.

I just don't have the abilities.

I tried adding GalaxyCoin but the client crashes and has an alert message stating it is out of data.

GlobalCoin I can take a look at.

What is PHS based off of?

I might be able to make it work.

According to this http://com-http.us/ccdir/phs , PHS is a fork of Diamond coin, so that might be trouble too.


EDIT:[URL] is being lame so copy pasta

[supermine]

I'm mining for 12h+ into p2pool.iorg (doge) I have not received 1 single doge, could you please investigate or clarify how I can investigate? Dis my address - DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h

Much appreciated!

[Jude Austin]

I'm mining for 12h+ into p2pool.iorg (doge) I have not received 1 single doge, could you please investigate or clarify how I can investigate? Dis my address - DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h

Much appreciated!

What is your hash rate?

Can I see the command you are using to mine?

[supermine]

Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?

[Jude Austin]

Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?

Are you using an address from the client on your computer as the username or from an exchange?

And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.

If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.

Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.

[supermine]

Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?

Are you using an address from the client on your computer as the username or from an exchange?

And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.

If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.

Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.

Hi, thanks for your fast reply, much appreciado.

- Adress from my Client on my PC
- I am mining 1MH/s as in 1000 KH/s = Correct algorithm, just applied mathematics at work.
- I am NOT using SHA256, I am using Scrypt as posted earlier

The problem is not with me, the problem is with the pool, maybe orphan block, no block or else? In 6h no no income in DogeCoin, this is bad news. No possibility to research. The pool web site is like a white paper, no info, no stats, no nothing. Please advise how I can get my money. It is mine, shares were submitted, electrity used, GPU 100%, Proof of Work.

[Jude Austin]

Hashrate was around 700 MH/s. I did point my miners away now for obvious reasons. I am using GUIMiner/Scrypt, so very basic commands build-into GUIMiner. Had not a problem with this setup with other pools yet. Can you find my username / doge adress somewhere inside your stats and what happened to the last 6-12h of mining?

Are you using an address from the client on your computer as the username or from an exchange?

And also, if you were mining in MH/s you were most likely mining with the wrong algorithm.

If you are using the SHA256 algorithm to mine then that would explain why you haven't gotten paid and haven't shown up on the payout list.

Not trying to be rude or anything like that but I don't think I would have over 100Mh/s on my pool if it wasn't paying out.

Hi, thanks for your fast reply, much appreciado.

- Adress from my Client on my PC
- I am mining 1MH/s as in 1000 KH/s = Correct algorithm, just applied mathematics at work.
- I am NOT using SHA256, I am using Scrypt as posted earlier

The problem is not with me, the problem is with the pool, maybe orphan block, no block or else? In 6h no no income in DogeCoin, this is bad news. No possibility to research. The pool web site is like a white paper, no info, no stats, no nothing. Please advise how I can get my money. It is mine, shares were submitted, electrity used, GPU 100%, Proof of Work.

I am confused, are you mining with 700MH/s or 1MH/s?

The first time you said 700 MH/s now it's 1MH/s.

I don't see your address anywhere in the logs for the pool.

You had to have been doing something wrong, I am sorry to say.

The only way your address wouldn't show up is if you weren't submitting any shares.

Can you please post a screen shot of your GUIMiner setup? And what video card are you using to mine?

[supermine]

Hi thanks for your continuing help with this and sticking with my problem!

I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.

Here's the screenshot:



As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.

The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)

Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?

2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart

[Jude Austin]

Hi thanks for your continuing help with this and sticking with my problem!

I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.

Here's the screenshot:



As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.

The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)

Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?

2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart

The issue you are having is you aren't submitting any shares.

See on GUIMiner where it says accepted, it says 0.

You technically aren't mining if you aren't submitting shares.

I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.

I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.

I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.

If you need assistance with setting up BFGMiner you can post here or PM me.

[BadAss.Sx]

Whn i point my miner to the tigercoin pool, i do not get listed in the graphs and also i wont get paid a coin. Why is this? I use my wallet as username and 10 times checked the pools address. Nothing happens.

Any idea?

[zvs]

jude,

i'm curious about something.  i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.  

do ports ppl were using that left ever close for you?  or it may have just been because they still had me as a backup pool?  eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)

[Jude Austin]

Whn i point my miner to the tigercoin pool, i do not get listed in the graphs and also i wont get paid a coin. Why is this? I use my wallet as username and 10 times checked the pools address. Nothing happens.

Any idea?

Hello,

Sorry for the delayed response, been busy with the holidaze.

Could I see your miner configuration?

We will start there.

[Jude Austin]

jude,

i'm curious about something.  i know when i used to run my p2pool, i'd have, say, 2 or 3 real miners, and about 90 random people on it every day, half with invalid addresses.  

do ports ppl were using that left ever close for you?  or it may have just been because they still had me as a backup pool?  eventually the whole 1000's of sockets being used, i couldnt do anything else (and i had firewall set to max 3 connections as well)

I don't really monitor the connections.

I am re-active when it comes to stuff like that, kind of that "If it isn't broke don't fix it" mentality, lol.

By invalid addresses do you mean just random characters?

And I could see if they still had your pool in their miner it would still check for block changes and still hold a connection, so that could be.

I see a lot of goofy stuff happen when people "mine" with the wrong algorithm.

You would be amazed how many emails I get a month from people complaining that they have had their ASIC mining Litecoin for a week and still haven't received payout, lol.

Anyways, Merry Christmas!

[supermine]

Hi thanks for your continuing help with this and sticking with my problem!

I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.

Here's the screenshot:



As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.

The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)

Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?

2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart

The issue you are having is you aren't submitting any shares.

See on GUIMiner where it says accepted, it says 0.

You technically aren't mining if you aren't submitting shares.

I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.

I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.

I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.

If you need assistance with setting up BFGMiner you can post here or PM me.

> I just re-started the miner, that's why it says 0 share there. There were accepted shares.

I had no problems with GUI Miner Frontend the last 3 years, I started mining with it in 2009. As I said there were many submitted shares, the screenshot is something I took after re-starting mining, after a computer reboot, it is just an example screenshot and not something to base debugging and troubleshooting upon. Can you please check these addresses DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD and DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h and if there are any shares submitted on these adresses.

Thanks for the tip with BFGMiner, I might even check it out, however I am mining into Multipool, Poolerino and many others without any problems with GUIMiner frontend (it is a just a GUI to CGMiner!!)

[Jude Austin]

Hi thanks for your continuing help with this and sticking with my problem!

I was using a R9 290 and a 5850 to mine Doge. The full hashrate is from 700KH/s to 1000KH/s. I am using my Desktop so that's why Hashrate fluctuates.

Here's the screenshot:

As you can see, it is clearly mining. I just re-started the miner, that's why it says 0 share there. There were accepted shares.

The full address has been: DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD (alternatively I may have used: DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h)

Here's the Console Log of 2 minutes of mining into p2pool.org, maybe this helps solving this mystery. Maybe the diff is to high for GPU mining?

2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Pool 0 difficulty changed to 935.495186
2013-12-20 17:21:46: Listener for "P2Pool Doge": [2013-12-20 17:21:45] Stratum from pool 0 requested work restart
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Pool 0 difficulty changed to 876.558143
2013-12-20 17:21:49: Listener for "P2Pool Doge": [2013-12-20 17:21:48] Stratum from pool 0 requested work restart
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:50] Pool 0 difficulty changed to 841.036636
2013-12-20 17:21:51: Listener for "P2Pool Doge": [2013-12-20 17:21:51] Stratum from pool 0 detected new block
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:21] Pool 0 difficulty changed to 1219.665471
2013-12-20 17:22:23: Listener for "P2Pool Doge": [2013-12-20 17:22:22] Stratum from pool 0 requested work restart
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Pool 0 difficulty changed to 1088.783801
2013-12-20 17:22:50: Listener for "P2Pool Doge": [2013-12-20 17:22:49] Stratum from pool 0 requested work restart
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Pool 0 difficulty changed to 1044.927262
2013-12-20 17:23:05: Listener for "P2Pool Doge": [2013-12-20 17:23:04] Stratum from pool 0 detected new block
2013-12-20 17:23:35: Listener for "P2Pool Doge": [2013-12-20 17:23:34] Pool 0 difficulty changed to 997.597449
2013-12-20 17:23:36: Listener for "P2Pool Doge": [2013-12-20 17:23:35] Stratum from pool 0 requested work restart
2013-12-20 17:23:57: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Pool 0 difficulty changed to 1171.633306
2013-12-20 17:23:58: Listener for "P2Pool Doge": [2013-12-20 17:23:57] Stratum from pool 0 requested work restart

The issue you are having is you aren't submitting any shares.

See on GUIMiner where it says accepted, it says 0.

You technically aren't mining if you aren't submitting shares.

I personally don't use any of the GUIMiner garbage but I believe you have to put --scrypt in the Extra Flags box.

I have no problem helping people out at all, with out all you precious miners P2Pool.org is useless.

I highly recommend you use a different miner like BFGMiner since CGMiner is discontinuing Scrypt support.

If you need assistance with setting up BFGMiner you can post here or PM me.

> I just re-started the miner, that's why it says 0 share there. There were accepted shares.

I had no problems with GUI Miner Frontend the last 3 years, I started mining with it in 2009. As I said there were many submitted shares, the screenshot is something I took after re-starting mining, after a computer reboot, it is just an example screenshot and not something to base debugging and troubleshooting upon. Can you please check these addresses DA9RKBz3ZJfvAE8GLcHAhhjT62StaUjRZD and DRC9EJRBKdqGKbBSnF9vkapcPfh52Gs27h and if there are any shares submitted on these adresses.

Thanks for the tip with BFGMiner, I might even check it out, however I am mining into Multipool, Poolerino and many others without any problems with GUIMiner frontend (it is a just a GUI to CGMiner!!)

I don't know what to tell you.

Nobody else has had issues getting paid out from the DOGE pool.

PM me.