Antminer D3 firmware Blissz V1.12 NoFee

[digital$]

if anyone wants this version..pm me.  a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

[microtechies]

if anyone wants this version..pm me.  a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

Hello, if you could send me the link please, I can't seem to send messages as I'm seen as a n00b

[xcajun21]

i tested the firmware . Thx to darkly spectre!!
 (The "guy" who did this "work" ask 50 $ for this )

Test results: The guy did not erase the dev pools. they are just drawn offline so if u have the idea to mine on suprnova dash u can forget it. suprnova is offline. this is the BIG ESCAMOTAGE. so miner have bads behaviors:

When u start the rig or if u have to reboot u will be NOT able to change/ add/ remove pools for few minutes because the d3 is thinking to mine the dev fee; ofc u can resolve setting your own pool but i think is a big minus, because u have to wait.
Bed compatibility with Awesome miner. Profitability switch automatically works, but u cant use "prioritize" command. For a manual switch u have to go setting of all pools and change priority. i think another big minus.

this firmware worth 50$? absolutely not. And if u use "awesome miner"  is so so bad mostly if u have more miners.
conclusion: Im a Awesome miner user so ill go back to the fee version until someone with more competencies will do the work

Could you give an update on this? How is the firmware? does this dev pool affect anything?

[zedbg]

Would be great if someone can send me a link in PM, thanks a lot

[scubatron]

if anyone wants this version..pm me.  a member here was kind enough to send it to me(Thx to darkly spectre!!) ill do the same for others.

Hi, can you PM me the link for this firmware? Much appreciate!

[Oil immersion cooling d3]

anyone has the new version?

the new versions do not work for 4 blades...only 3 cards i have custom D3s with 4 boards and i tried and didnt work

Hi, i tried to pm you but it says that you need to change your settings to allows newbies to pm you.

Anyways, I tried putting a fourth hashboard on my d3 but the fourth hashboard would only put out half the hashrate for some reason. Did you have this problem also?

BTW i am running 5 hasboards on one powersupply and two controller boards immersed in oil works great. Let me know if you want to share mining war stories.     

Any chance you coiuld let me try the blissz no fee version?                                                                           

[Oil immersion cooling d3]

If anybody wants the firmware just PM me. I am not going to risk actually posting it here since greedy mcMoney might report me for it

Hi, would you be so kind as to send me a link to the blissz free latest firmware?

I would really appreciate it and also willing to share my knowledge to help you if you are interested. I currently have two d3s operating beautifully and COMPLETELY silently using a unique liquid immersion cooling system I could share the plans with you.

I justify skiping the fee because after all much of the programming from cgminer and bitmain was taken from them with no compensation and he DID make some fees already... and the D3 mining game is so close to over that at this point is ok ...

Cheers

Mateus

I think I tried to pm you but it says you have to change your settings if you want to allow newbies like me to be able to pm you.

[Oil immersion cooling d3]

Sorry if im double replying, im new learning the fiference between quote and reply. In case this is the only one you see. Could you please pm me a link to the blissz no fee? I would be happy to help in return with any info I have, specifically around liquid immersion cooling that I am doing now.
Thanks

[xcajun21]

I understand you have hash rate drop? try this https://support.bitmain.com/hc/en-us/articles/115004478634-D3-Hash-rate-is-low-or-a-hash-board-is-faulty

[Oil immersion cooling d3]

lol whoever wants this. PM me. this shit shouldn't be behind a shady paywall  

Im looking everywhere for it. Please pm me a link to the blissz d3 firmware no fee version.
I tried to pm you but it said that you have to unblock somthing in your settings so that newbies can pm you.

Thank you, if I can help with anything in return let me know? Perhpas I can share my oil immersion sucess story and tips etc.

[evilhomer0815]

Hi :-)
Would you please be so kind to pm me a link to the latest NoFee Version?
Thanks in advance and best regards

[BigMoe]

If someone would pm me the link for the dev free software...i would appreciate it very much.

Thank you

[saycryptohello]

with such a price for the crypto currency, does it make sense to buy a miner?

[itenica]

I would love to try the Blissz no-fee version. I was foolish enough to buy 50 of these boat anchors and need to find some edge to help. Please PM if you have a link, Thx

[bjacket]

I tried Blissz v2.06 beta and my box keep rebooting every so often.

So does this fee base code work or not?

[mehouse]

Crap I lost my Bliss no fee version,
Can someone send me a pm ?
(If possible for L3 and D3)

Regards in advance

[riwant]

please..need to get a copy of this version too

[darkly spectre]

I have send out the links to everybody who asked. I apologise for the wait. I have been working on my new house for the last two weeks and it essentially was nothing but 7 AM till 10PM days with me being back home at the current place at 11PM so I definitely wasn't in the mood to check BCT. but everything has been send out to those who asked 

[KuzNet]

I have send out the links to everybody who asked. I apologise for the wait. I have been working on my new house for the last two weeks and it essentially was nothing but 7 AM till 10PM days with me being back home at the current place at 11PM so I definitely wasn't in the mood to check BCT. but everything has been send out to those who asked 

Send me please a link.

[Yoe]

I am also flagged as a "noob".   Would appreciate a link to a copy of the D3 NoFee firmware as well.

Thank you in advance.