artarioustgat (OP)
Newbie
 Offline
Activity: 4
Merit: 1
|
 |
January 28, 2018, 02:18:03 AM
Last edit: January 28, 2018, 06:02:55 AM by artarioustgat |
|
Hello! Ive been running a S9 miner and had no issues with it until last night.
Everything was fine until yesterday. I was averaging 13.6 Th and then it went down to 500 Gh over night. I tried resetting and that didn't work. I tried updating the firmware and that didn't work
I then started checking each hashboard. I have found that when I power up two boards it gives me 10.1 Th but when I do all 3 it only gives me 500 Gh.
If you have the S9 antminer sitting on a table with the ethernet port facing you the board on the FAR LEFT seems to be the problem. Here are my results of testing.
When powering the MIDDLE board only I get 5.1 Th and the temperature reads correctly
When powering the FAR RIGHT board only I get 5.1 Th and the temperature reads correctly
When powering the MIDDLE and FAR RIGHT board I get 10 Th. and the temperature reads correctly
When ONLY powering the FAR LEFT board I get 1.1Th and the temperature DOES NOT READ CORRECTLY
When powering ANY COMBINATION WITH the FAR LEFT board INCLUDED I only get 500 gh and the temperature DOES NOT READ AT ALL
When powering ALL THREE I get 500 Gh and the temperature DOES NOT READ AT ALL
I have tried all the different combinations of power connectors to all the boards and that doesn't seem to change anything.
So I have no idea what to do right now. Can I get some help from the great repository of wisdom that is bitcointalk?
Thanks!
Edited: updated troubleshooting steps
Edited: updated troubleshooting steps...AGAIN
|
|
|
|
|
MrMinerQC
Newbie
Offline
Activity: 6
Merit: 0
|
 |
January 28, 2018, 04:43:05 AM |
|
What about kernel logs? I guess the only option might be to contact Bitmain support or where you bought it. Is it still on the warranty?
|
|
|
|
|
artarioustgat (OP)
Newbie
Offline
Activity: 4
Merit: 1
|
|
January 28, 2018, 05:49:22 AM |
|
6 days out of warranty :/ Here is the kernel log when I have the FAR LEFT powered and the FAR RIGHT. If anyone has a better way to post kernel logs I would love to know, this seems huge. edited: had to cut out some stuff that was just repeating because of post character limits. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000303] ps7-ttc #0 at f0006000, irq=43
[ 0.000614] Console: colour dummy device 80x30
[ 0.000652] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040205] pid_max: default: 32768 minimum: 301
[ 0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042566] CPU: Testing write buffer coherency: ok
[ 0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042976] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043199] L310 cache controller enabled
[ 0.043219] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121033] CPU1: Booted secondary processor
[ 0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210355] Brought up 2 CPUs
[ 0.210374] SMP: Total of 2 processors activated.
[ 0.210383] CPU: All CPU(s) started in SVC mode.
[ 0.211034] devtmpfs: initialized
[ 0.213436] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214645] regulator-dummy: no parameters
[ 0.221910] NET: Registered protocol family 16
[ 0.224150] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226437] cpuidle: using governor ladder
[ 0.226451] cpuidle: using governor menu
[ 0.233875] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235390] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235404] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235520] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257240] bio: create slab <bio-0> at 0
[ 0.258664] vgaarb: loaded
[ 0.259371] SCSI subsystem initialized
[ 0.260904] usbcore: registered new interface driver usbfs
[ 0.261385] usbcore: registered new interface driver hub
[ 0.261624] usbcore: registered new device driver usb
[ 0.262159] media: Linux media interface: v0.10
[ 0.262324] Linux video capture interface: v2.00
[ 0.262561] pps_core: LinuxPPS API ver. 1 registered
[ 0.262573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262696] PTP clock support registered
[ 0.263052] EDAC MC: Ver: 3.0.0
[ 0.264086] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266907] DMA-API: preallocated 4096 debug entries
[ 0.266922] DMA-API: debugging enabled by kernel config
[ 0.266994] Switched to clocksource arm_global_timer
[ 0.286819] NET: Registered protocol family 2
[ 0.287534] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287630] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287788] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287856] TCP: reno registered
[ 0.287874] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287927] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288178] NET: Registered protocol family 1
[ 0.288541] RPC: Registered named UNIX socket transport module.
[ 0.288554] RPC: Registered udp transport module.
[ 0.288562] RPC: Registered tcp transport module.
[ 0.288571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288584] PCI: CLS 0 bytes, default 64
[ 0.289020] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291068] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292471] bounce pool size: 64 pages
[ 0.293362] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293561] msgmni has been set to 1486
[ 0.294341] io scheduler noop registered
[ 0.294355] io scheduler deadline registered
[ 0.294397] io scheduler cfq registered (default)
[ 0.307236] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307256] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430535] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003451] console [ttyPS0] enabled
[ 1.007736] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.015347] [drm] Initialized drm 1.1.0 20060810
[ 1.032433] brd: module loaded
[ 1.041795] loop: module loaded
[ 1.051399] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057255] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065013] libphy: XEMACPS mii bus: probed
[ 1.069419] ------------- phy_id = 0x3625e62
[ 1.074140] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.082921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.089574] ehci-pci: EHCI PCI platform driver
[ 1.096781] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.103852] usbcore: registered new interface driver usb-storage
[ 1.110759] mousedev: PS/2 mouse device common for all mice
[ 1.116859] i2c /dev entries driver
[ 1.123808] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.129373] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135240] Xilinx Zynq CpuIdle Driver started
[ 1.140110] sdhci: Secure Digital Host Controller Interface driver
[ 1.146201] sdhci: Copyright(c) Pierre Ossman
[ 1.150612] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.157367] mmc0: no vqmmc regulator found
[ 1.161378] mmc0: no vmmc regulator found
[ 1.197012] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205695] usbcore: registered new interface driver usbhid
[ 1.211204] usbhid: USB HID core driver
[ 1.215929] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222227] nand: Micron MT29F2G08ABAEAWP
[ 1.226191] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232135] Bad block table found at page 131008, version 0x01
[ 1.238361] Bad block table found at page 130944, version 0x01
[ 1.244410] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250196] Creating 3 MTD partitions on "pl353-nand":
[ 1.255282] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263327] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270648] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279582] TCP: cubic registered
[ 1.282821] NET: Registered protocol family 17
[ 1.287534] Registering SWP/SWPB emulation handler
[ 1.293432] regulator-dummy: disabling
[ 1.297793] UBI: attaching mtd1 to ubi0
[ 1.824812] UBI: scanning is finished
[ 1.836510] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843593] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850355] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857038] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863875] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869876] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.876983] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.886026] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895243] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.895248] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899189] ALSA device list:
[ 1.899192] No soundcards found.
[ 1.915608] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.944626] UBIFS: recovery needed
[ 2.041222] UBIFS: recovery completed
[ 2.044887] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.050868] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.059944] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.069830] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.074859] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.086156] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.093347] devtmpfs: mounted
[ 2.096454] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.936617] random: dd urandom read with 0 bits of entropy available
[ 3.327040]
[ 3.327040] bcm54xx_config_init
[ 3.937028]
[ 3.937028] bcm54xx_config_init
[ 6.937880] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.943968] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 20.413257] In axi fpga driver!
[ 20.416323] request_mem_region OK!
[ 20.419756] AXI fpga dev virtual address is 0xf01fe000
[ 20.424822] *base_vir_addr = 0x8c510
[ 20.440465] In fpga mem driver!
[ 20.443536] request_mem_region OK!
[ 20.447134] fpga mem virtual address is 0xf3000000
[ 21.256414]
[ 21.256414] bcm54xx_config_init
[ 21.886362]
[ 21.886362] bcm54xx_config_init
[ 24.886906] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.892924] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 407.506579] random: nonblocking pool is initialized
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 81100d4162b58854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[46] has core num=12
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[11] has core num=3
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[14] has core num=10
Chain[7] ASIC[49] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1375 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 2155 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81100d4162b58854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
Chain[J6] has backup chain_voltage=900
Chain[J6] test patten OK temp=-114
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-118
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
Chain[J8] has backup chain_voltage=900
Chain[J8] test patten OK temp=-119
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=900 [74]
Chain[J7] get working chain_voltage_pic=74
Chain[J8] orignal chain_voltage_pic=74 value=900
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 102 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 102 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[46] has core num=12
Chain[J6] ASIC[50] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[14] has core num=10
Chain[J8] ASIC[49] has core num=1
miner total rate=9332GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=102
Chain[J8] voltage added=0.1V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:631 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:631 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:643 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 Asic[63]:200 Asic[64]:200
Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200 Asic[69]:200 Asic[70]:200 Asic[71]:200 Asic[72]:200
Asic[73]:200 Asic[74]:200 Asic[75]:200 Asic[76]:200 Asic[77]:200 Asic[78]:200 Asic[79]:200 Asic[80]:200
Asic[81]:200 Asic[82]:200 Asic[83]:200 Asic[84]:200 Asic[85]:200 Asic[86]:200 Asic[87]:200 Asic[88]:200
Asic[89]:200 Asic[90]:200 Asic[91]:200 Asic[92]:200 Asic[93]:200 Asic[94]:200 Asic[95]:200 Asic[96]:200
Asic[97]:200 Asic[98]:200 Asic[99]:200 Asic[100]:200 Asic[101]:200
Chain:7 max freq=656
Chain:7 min freq=200
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=102
Chain[J8] voltage added=0.1V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:631 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:631 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:643 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 Asic[63]:200 Asic[64]:200
Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200 Asic[69]:200 Asic[70]:200 Asic[71]:200 Asic[72]:200
Asic[73]:200 Asic[74]:200 Asic[75]:200 Asic[76]:200 Asic[77]:200 Asic[78]:200 Asic[79]:200 Asic[80]:200
Asic[81]:200 Asic[82]:200 Asic[83]:200 Asic[84]:200 Asic[85]:200 Asic[86]:200 Asic[87]:200 Asic[88]:200
Asic[89]:200 Asic[90]:200 Asic[91]:200 Asic[92]:200 Asic[93]:200 Asic[94]:200 Asic[95]:200 Asic[96]:200
Asic[97]:200 Asic[98]:200 Asic[99]:200 Asic[100]:200 Asic[101]:200
Chain:7 max freq=656
Chain:7 min freq=200
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Chain[J6] use default temp chip[244]
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[5] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[5] chip[244] local:-64 remote:0 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=00
Chain[J6] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[7]
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=00 asic[07]=00
asic[08]=00 asic[09]=00 asic[10]=00 asic[11]=00 asic[12]=00 asic[13]=00 asic[14]=00 asic[15]=00
asic[16]=00 asic[17]=00 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[00]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[03]=00
core[000]=0 core[001]=0 core[002]=0 core[003]=0 core[004]=0 core[005]=0 core[006]=0 core[007]=0 core[008]=0 core[009]=0 core[010]=0 core[011]=0 core[012]=0 core[013]=0 core[014]=0 core[015]=0 core[016]=0 core[017]=0 core[018]=0 core[019]=0 core[020]=0 core[021]=0 core[022]=0 core[023]=0 core[024]=0 core[025]=0 core[026]=0 core[027]=0 core[028]=0 core[029]=0 core[030]=0 core[031]=0 core[032]=0 core[033]=0 core[034]=0 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=0 core[049]=0 core[050]=0 core[051]=0 core[052]=0 core[053]=0 core[054]=0 core[055]=0 core[056]=0 core[057]=0 core[058]=0 core[059]=0 core[060]=0 core[061]=0 core[062]=0 core[063]=0 core[064]=0 core[065]=0 core[066]=0 core[067]=0 core[068]=0 core[069]=0 core[070]=0 core[071]=0 core[072]=0 core[073]=0 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=0 core[079]=0 core[080]=0 core[081]=0 core[082]=0 core[083]=0 core[084]=0 core[085]=0 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=631 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=656 freq[47]=656
freq[48]=656 freq[49]=631 freq[50]=656 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=643 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=698 total_tv_end_sys=699
restartNum = 2 , auto-reinit enabled...
Error: check_asic_reg 0x08 timeout
Error: check_asic_reg 0x08 timeout
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=0
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[7]
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=46077
|
|
|
|
|
artarioustgat (OP)
Newbie
Offline
Activity: 4
Merit: 1
|
|
January 28, 2018, 06:00:15 AM |
|
Here is the log from when the MIDDLE and the FAR RIGHT are powered. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at f0006000, irq=43
[ 0.000618] Console: colour dummy device 80x30
[ 0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042577] CPU: Testing write buffer coherency: ok
[ 0.042924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042986] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043210] L310 cache controller enabled
[ 0.043230] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121042] CPU1: Booted secondary processor
[ 0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210388] CPU: All CPU(s) started in SVC mode.
[ 0.211052] devtmpfs: initialized
[ 0.213460] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214667] regulator-dummy: no parameters
[ 0.221923] NET: Registered protocol family 16
[ 0.224216] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226493] cpuidle: using governor ladder
[ 0.226506] cpuidle: using governor menu
[ 0.233929] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235449] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235462] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235569] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257590] bio: create slab <bio-0> at 0
[ 0.258997] vgaarb: loaded
[ 0.259701] SCSI subsystem initialized
[ 0.261314] usbcore: registered new interface driver usbfs
[ 0.261492] usbcore: registered new interface driver hub
[ 0.261715] usbcore: registered new device driver usb
[ 0.262249] media: Linux media interface: v0.10
[ 0.262404] Linux video capture interface: v2.00
[ 0.262644] pps_core: LinuxPPS API ver. 1 registered
[ 0.262656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262779] PTP clock support registered
[ 0.263130] EDAC MC: Ver: 3.0.0
[ 0.264169] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266999] DMA-API: preallocated 4096 debug entries
[ 0.267013] DMA-API: debugging enabled by kernel config
[ 0.267090] Switched to clocksource arm_global_timer
[ 0.287267] NET: Registered protocol family 2
[ 0.288207] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.288303] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.288463] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288525] TCP: reno registered
[ 0.288543] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288595] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288856] NET: Registered protocol family 1
[ 0.289292] RPC: Registered named UNIX socket transport module.
[ 0.289305] RPC: Registered udp transport module.
[ 0.289314] RPC: Registered tcp transport module.
[ 0.289322] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289335] PCI: CLS 0 bytes, default 64
[ 0.289775] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291792] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293199] bounce pool size: 64 pages
[ 0.294085] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.294284] msgmni has been set to 1486
[ 0.295050] io scheduler noop registered
[ 0.295063] io scheduler deadline registered
[ 0.295105] io scheduler cfq registered (default)
[ 0.308810] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308829] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.431603] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003708] console [ttyPS0] enabled
[ 1.008011] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.015618] [drm] Initialized drm 1.1.0 20060810
[ 1.032687] brd: module loaded
[ 1.042123] loop: module loaded
[ 1.051623] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057398] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065167] libphy: XEMACPS mii bus: probed
[ 1.069567] ------------- phy_id = 0x3625e62
[ 1.074286] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.082973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.089774] ehci-pci: EHCI PCI platform driver
[ 1.096993] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.103829] usbcore: registered new interface driver usb-storage
[ 1.110704] mousedev: PS/2 mouse device common for all mice
[ 1.116782] i2c /dev entries driver
[ 1.123731] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.129256] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135131] Xilinx Zynq CpuIdle Driver started
[ 1.140010] sdhci: Secure Digital Host Controller Interface driver
[ 1.146107] sdhci: Copyright(c) Pierre Ossman
[ 1.150534] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.157306] mmc0: no vqmmc regulator found
[ 1.161318] mmc0: no vmmc regulator found
[ 1.197120] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205789] usbcore: registered new interface driver usbhid
[ 1.211303] usbhid: USB HID core driver
[ 1.216014] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222310] nand: Micron MT29F2G08ABAEAWP
[ 1.226279] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232221] Bad block table found at page 131008, version 0x01
[ 1.238445] Bad block table found at page 130944, version 0x01
[ 1.244494] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250278] Creating 3 MTD partitions on "pl353-nand":
[ 1.255375] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263414] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270733] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279654] TCP: cubic registered
[ 1.282891] NET: Registered protocol family 17
[ 1.287615] Registering SWP/SWPB emulation handler
[ 1.293543] regulator-dummy: disabling
[ 1.297893] UBI: attaching mtd1 to ubi0
[ 1.824924] UBI: scanning is finished
[ 1.836577] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843662] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850424] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857109] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.863945] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.869947] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877054] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1134783803
[ 1.886097] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895313] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.895319] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899276] ALSA device list:
[ 1.899280] No soundcards found.
[ 1.915673] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.944875] UBIFS: recovery needed
[ 2.045366] UBIFS: recovery completed
[ 2.049066] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.054986] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.064119] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.074004] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.079045] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.090340] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.097526] devtmpfs: mounted
[ 2.100627] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.946942] random: dd urandom read with 0 bits of entropy available
[ 3.337129]
[ 3.337129] bcm54xx_config_init
[ 3.947122]
[ 3.947122] bcm54xx_config_init
[ 6.947970] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.954056] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 20.175943] In axi fpga driver!
[ 20.179053] request_mem_region OK!
[ 20.182407] AXI fpga dev virtual address is 0xf01fe000
[ 20.187555] *base_vir_addr = 0x8c510
[ 20.203284] In fpga mem driver!
[ 20.206349] request_mem_region OK!
[ 20.209968] fpga mem virtual address is 0xf3000000
[ 21.006507]
[ 21.006507] bcm54xx_config_init
[ 21.636445]
[ 21.636445] bcm54xx_config_init
[ 24.636999] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.643021] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 407.951311] random: nonblocking pool is initialized
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 81100d4162b58854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[46] has core num=12
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[11] has core num=3
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[14] has core num=10
Chain[7] ASIC[49] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=6 on chain[6], value=940
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1374 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1799 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81100d4162b58854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
Chain[J6] has backup chain_voltage=900
Chain[J6] test patten OK temp=-114
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-118
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
Chain[J8] has backup chain_voltage=900
Chain[J8] test patten OK temp=-119
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=900 [74]
Chain[J8] get working chain_voltage_pic=74
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[46] has core num=12
Chain[J6] ASIC[50] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[11] has core num=3
Chain[J7] ASIC[15] has core num=2
Chain[J7] ASIC[50] has core num=1
miner total rate=9332GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:631 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:631 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:656 Asic[50]:631 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=631
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:5 max freq=656
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:631 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:631 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:656 Asic[50]:631 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:6 max freq=656
Chain:6 min freq=631
max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:23 remote:24 offset:28
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:20 remote:22 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=910 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=911 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[44]=910
core[070]=6
asic[56]=911
core[113]=7
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26679
last_nonce_num:33863
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=910 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=896
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=911 asic[43]=909 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=900 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=911
asic[56]=832 asic[57]=912 asic[58]=909 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[11]=910
core[001]=6
asic[15]=896
core[112]=0 core[113]=0
asic[42]=911
core[086]=7
asic[43]=909
core[058]=7 core[060]=6
asic[50]=900
core[004]=6 core[006]=6 core[013]=6 core[038]=5 core[055]=6 core[058]=7
asic[55]=911
core[009]=7
asic[56]=832
core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[58]=909
core[056]=6 core[110]=7
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=631 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=631 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=656 freq[50]=631 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:57338
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26582
last_nonce_num:29029
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26688
last_nonce_num:29739
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=896
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=832 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[15]=896
core[112]=0 core[113]=0
asic[56]=832
core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=631 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=631 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=656 freq[50]=631 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656
total valid nonce number:57360
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26598
last_nonce_num:9789
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=390 total_tv_end_sys=391
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5950 Asic[02]=72.0910 Asic[03]=69.2730 Asic[04]=73.8860 Asic[05]=79.4560 Asic[06]=76.8060 Asic[07]=77.9970 Asic[08]=80.6640
Asic[09]=74.6580 Asic[10]=72.3090 Asic[11]=73.6510 Asic[12]=75.6820 Asic[13]=76.3530 Asic[14]=71.8400 Asic[15]=72.4440 Asic[16]=74.4400
Asic[17]=76.4530 Asic[18]=78.2480 Asic[19]=72.0580 Asic[20]=74.1210 Asic[21]=77.4930 Asic[22]=76.2690 Asic[23]=69.9770 Asic[24]=70.4810
Asic[25]=67.7630 Asic[26]=73.9530 Asic[27]=76.5370 Asic[28]=79.3890 Asic[29]=71.8400 Asic[30]=74.8930 Asic[31]=78.6340 Asic[32]=68.7860
Asic[33]=75.2450 Asic[34]=71.9910 Asic[35]=75.6140 Asic[36]=71.9740 Asic[37]=76.1680 Asic[38]=70.6650 Asic[39]=79.4400 Asic[40]=75.6310
Asic[41]=80.2110 Asic[42]=76.1350 Asic[43]=75.8830 Asic[44]=75.6650 Asic[45]=72.4770 Asic[46]=72.7620 Asic[47]=80.1780 Asic[48]=75.2120
Asic[49]=78.0970 Asic[50]=70.9670 Asic[51]=75.4130 Asic[52]=77.3930 Asic[53]=72.6620 Asic[54]=75.8330 Asic[55]=70.1280 Asic[56]=69.3570
Asic[57]=70.9840 Asic[58]=73.6680 Asic[59]=76.2690 Asic[60]=69.1220 Asic[61]=75.4630 Asic[62]=78.9870 Asic[63]=67.0410
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=74.2050 Asic[02]=71.5040 Asic[03]=72.3600 Asic[04]=70.5310 Asic[05]=72.1420 Asic[06]=69.8600 Asic[07]=75.6310 Asic[08]=71.2190
Asic[09]=74.2390 Asic[10]=71.3030 Asic[11]=75.6480 Asic[12]=71.9400 Asic[13]=75.3960 Asic[14]=80.0270 Asic[15]=71.0170 Asic[16]=73.3330
Asic[17]=76.1350 Asic[18]=73.4170 Asic[19]=71.6550 Asic[20]=75.1450 Asic[21]=75.5980 Asic[22]=75.9330 Asic[23]=72.6280 Asic[24]=71.9570
Asic[25]=73.4840 Asic[26]=73.9030 Asic[27]=73.9200 Asic[28]=73.9700 Asic[29]=71.7720 Asic[30]=71.6210 Asic[31]=71.6050 Asic[32]=70.9340
Asic[33]=79.0200 Asic[34]=72.1920 Asic[35]=75.4470 Asic[36]=70.1790 Asic[37]=74.3730 Asic[38]=76.2520 Asic[39]=74.2050 Asic[40]=70.9670
Asic[41]=78.9200 Asic[42]=77.5440 Asic[43]=70.6990 Asic[44]=74.8760 Asic[45]=76.2520 Asic[46]=77.1750 Asic[47]=76.0670 Asic[48]=75.6980
Asic[49]=75.2450 Asic[50]=75.9840 Asic[51]=71.7560 Asic[52]=77.4770 Asic[53]=73.0980 Asic[54]=86.1670 Asic[55]=73.8700 Asic[56]=75.0100
Asic[57]=67.7460 Asic[58]=79.0540 Asic[59]=74.4900 Asic[60]=75.0780 Asic[61]=70.6820 Asic[62]=75.4130 Asic[63]=72.3760
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=28
Chain[5] Chip[62] local Temp=56
Chain[5] Chip[62] middle Temp=68
Special fix Chain[5] Chip[62] middle Temp = 71
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=50
Chain[6] Chip[62] middle Temp=63
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
set FAN speed according to: temp_highest=56 temp_top1[PWM_T]=56 temp_top1[TEMP_POS_LOCAL]=56 temp_change=-1 fix_fan_steps=0
FAN PWM: 64
read_temp_func Done!
CRC error counter=0
|
|
|
|
|
Yrth
Member
Offline
Activity: 123
Merit: 21
|
|
January 28, 2018, 09:02:34 AM |
|
Looks like a dead board to me. I had the same problem with a couple of R4's. After trying several things, I just sent it in for repairs.
|
|
|
|
|
|
