[HELP] Issue with some sapphire tech rx 580 SE 8gb gpus(good challenge)

[CryptoWatcher420]

bump

[1715089978]

1715089978

[1715089978]

1715089978

[1715089978]

1715089978

[1715089978]

1715089978

[1715089978]

1715089978

[1715089978]

1715089978

[blackpirl8]

Resolve this yet?

all pcie slots set to "Gen1"?  (including the 16x)?

I to run an Asrock board with Sapphire 8GB SE Micron and have odd issues.  (even stock)
With the asrock h110 pro btc+ and Windows 10 (1703 or 1709), I can only mine if I have the Integrated GPU on.  When I set to disabled, my RX580's lose "OpenCL" which is required to mine.
Currently have 8 of these identical GPU in the rig on Silent mode, and can only mine for approx 6 hours before the AMD driver crashes.

This might help your situation?  See latest Beta Bios revision as of Feb 27
http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/#BIOS

[CryptoWatcher420]

Resolve this yet?

all pcie slots set to "Gen1"?  (including the 16x)?

I to run an Asrock board with Sapphire 8GB SE Micron and have odd issues.  (even stock)
With the asrock h110 pro btc+ and Windows 10 (1703 or 1709), I can only mine if I have the Integrated GPU on.  When I set to disabled, my RX580's lose "OpenCL" which is required to mine.
Currently have 8 of these identical GPU in the rig on Silent mode, and can only mine for approx 6 hours before the AMD driver crashes.

This might help your situation?  See latest Beta Bios revision as of Feb 27
http://www.asrock.com/mb/Intel/H81%20Pro%20BTC%20R2.0/#BIOS

no its not resolved, ive tried setting the slots to gen1 and I tried gen 2 which made no difference on the asrock h81 pro btc R2.0 mobo, also tried with and without the intergrated gpu still no difference, pretty sure why I cant run 6 is because of not enough juice for the 6th gpu. 5 run just fine no problems what so ever, even runs for months no issues

I believe I have the feb bios from asrock on the mobo already, about 95% sure lol and didn't make any difference lol

[blackpirl8]

Do you have a power meter connected to see how much power you're draining while mining?
I think you may be correct about the power supply issue.

I believe that on Boost, cards will drain 250W per card
Silent when I tried, GPU-Z gave 150-160W to the GPU, but that would be higher to the wall outlet.
Just there, that would be 1200W approx.
That leaves 300W for risers, SSD, motherboard, fans, etc.  (Anything electrical should only run 75-80% max power)

I just googled "180w Pico PSU" as I have never heard of that.  What exactly is this connected to on the rig?

Things I would try:
1. Run all of the cards on Silent instead of (3) on Boost and (3) on Silent?  That would lower the watts.
2. Ensure that your Windows 10 Power Management is set to "High Performance" and ensure the Hard Drives Never shutdown, screen never shuts down, PCIe slots can't be managed, etc (the regular stuff)
3. Review PCIE/SSD/HDD in "Device Manager" and ensure that the Power Management is disabled on all of these drivers

[vuhoang1giang]

I was have same Issue like you. And my choice that time are sell all @@

[Midcrypto]

You should be running linux to mine, mining on windows is asking for headaches.

Have you tried taking off all cards but the troubled one to make sure it can still hash on its own?

Have you tested all the individual components? (riser, cables, PCIE slot, etc)

I agree with this. Put SMOS (Simplemining OS) on a flash drive and boot from that. It if detects and runs with all 6 cards right away you know it's a Windows issue.

[CryptoWatcher420]

Do you have a power meter connected to see how much power you're draining while mining?
I think you may be correct about the power supply issue.

I believe that on Boost, cards will drain 250W per card
Silent when I tried, GPU-Z gave 150-160W to the GPU, but that would be higher to the wall outlet.
Just there, that would be 1200W approx.
That leaves 300W for risers, SSD, motherboard, fans, etc.  (Anything electrical should only run 75-80% max power)

I just googled "180w Pico PSU" as I have never heard of that.  What exactly is this connected to on the rig?

Things I would try:
1. Run all of the cards on Silent instead of (3) on Boost and (3) on Silent?  That would lower the watts.
2. Ensure that your Windows 10 Power Management is set to "High Performance" and ensure the Hard Drives Never shutdown, screen never shuts down, PCIe slots can't be managed, etc (the regular stuff)
3. Review PCIE/SSD/HDD in "Device Manager" and ensure that the Power Management is disabled on all of these drivers

the pico psu powers the motherboard and a ssd, its just a super mini version of a normal psu with the exception that the pico psu's input volts is 12v

[Mohondoa]

    Generaly what i know about your problem came from GPU memory error or too much over clock setting, so at the console cmd miner software the gpu hashrate show is zero (0.000 M h/s).
    Try to use stock bios and don't use any OC tools, if there's show hashrate, probably your problem is OC setting. This is from my experience

[blackpirl8]

    Generaly what i know about your problem came from GPU memory error or too much over clock setting, so at the console cmd miner software the gpu hashrate show is zero (0.000 M h/s).
    Try to use stock bios and don't use any OC tools, if there's show hashrate, probably your problem is OC setting. This is from my experience

Cryptowatcher already said he is running stock.  These video cards have 2 settings (A dip switch).  3 on Boost (default) and 3 on Silent

[skablast]

My 2 cents:

"just over 17gb pagefile"

6*8 = 48

can you make one pagefile of at least 32 gb ?

I would say that if 5 work well with 17, 6 will work with 20 if you can't make it 32.

[CryptoWatcher420]

My 2 cents:

"just over 17gb pagefile"

6*8 = 48

can you make one pagefile of at least 32 gb ?

I would say that if 5 work well with 17, 6 will work with 20 if you can't make it 32.

pagefile means dick, come back with something better, my rigs all run 8gb ram anything over 17gb pagefile is pointless, if that were needed I would have seen the same issue with the rx 480's I have from the same company. now if I were running rigs with 4gb ram sure I could see that, but I'm not. fact is more RAM you have the less you need a pagefile. pc's use mobo ram before pagefile. as it stands 8gb ram + 17gb pagefile is 25gb of memory the gpus can allocate, so please why don't you explain where a 32gb pagefile is going go have ANY affect in this very specific situation? look folks I'm not looking for your danm 2 cents, most/all of the common things ive tried some many times over just to check. if you don't have information that is of some rarity then it needs not to be mentioned, not to sound like an ass here but I'm looking for specific information and not just the everyday stuff.

thanks crypto

[skablast]

I don't know what you did and haven't written here.
It was just something if it was mine I 'll try and I'm lazy to double check if it work as I have exactly( besides the PSU) the same configuration, same card, same windows you have and it work fine with all.
that was my 2 cents


there is only one thing I can bet 1000 $ on:

[/quote], not to sound like an ass
thanks crypto
[/quote]

Yes, that's exactly how it sound

have a nice day

[CryptoWatcher420]

I don't know what you did and haven't written here.
It was just something if it was mine I 'll try and I'm lazy to double check if it work as I have exactly( besides the PSU) the same configuration, same card, same windows you have and it work fine with all.
that was my 2 cents


there is only one thing I can bet 1000 $ on:

, not to sound like an ass
thanks crypto
[/quote]

Yes, that's exactly how it sound

have a nice day

[/quote]

tbh if you had really read my original post, you should have gotten the impression that im not looking for some noobs 2 cents, im looking for a specific information on a issue that its clear some noob cannot answer as you have clearly demonstrated, sorry if you thought i was an ass but im not here to please you in the form of words, im super blunt so if people repeatedly give me useless information or tell me to do something IVE ALREADY DONE, youd eventually get irritated too its as simple as that. in my original post i state ive already done all the normal stuff, and some of it twice over for good measure but i guess you missed that part?

[skablast]

As I stated, It happen that I have the very same configuration.Hw & sw beside Card are mod SRBpolaris- pimp straps and I have different PSU.
I was unable to replicate your error resetting the card to stock(but straps still modded). That lead me to think your problem is there or in the PSUs.

- Run more instance of Claymore starting them in different orders is the only out of the box  idea I can give you in order to identify if its a claymore/driver issue or not

tests and comments finished