sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
January 30, 2018, 12:25:23 PM Merited by MagicSmoker (1) |
|
I built my first Cryptonight rig a few months back using Sapphire Pulse RX 570 and was able to get 915 h/s @ 95 watt on the wall. Due to high prices and unavailability of RX 570s, I decided to give RX 560s a shot. I am glad to mention that I am able to obtain 515 h/s @ 40 watt on the wall for AMD RX 560 while mining Electroneum/Sumokoin (will be true for all Cryptonight coins e.g., Monero, Karbo). You can see the proof of hashrate and clock settings at this link: https://imgur.com/a/q1iKkI am using sgminer-gm 5.5 with rawintensity 416 and worksize 8. The trick was to use 2 gpu threads in the config file as follows: "rawintensity": "416", "worksize": "8", "gpu-threads": "2" My GPU is Asus OC 2gb Polaris 14nm 1210 Ghz core and 1750 Mhz memory clock. It uses Elpida DDR5 memory. Its bios is modified using Polaris 1.6.6 editor's one click patch option and that was pretty much it. (I tried Sapphire RX Pulse 4gb version but could not get it above 410 h/s). I tried Crimson Beta 17.30 Blockchain driver but it kept on crashing. Finally managed to make Crimson relive 17.7 work. If you find the above post useful, please consider donating to following addresses: BTC: 3CW1WbDDtjfWprc7K4VQpNtJP7jsJMTbGF ETH: 0x134e57a0902eAb8019aE0dd7bC80cFd75B4b55f0 Sumokoin: Sumoo3NqEtVixhMfApYUzDa6AmomPypQ5AkHeMgfqTzG7G3nyQw5kbPSw9m69fKFJADMaVbnAkhpv86 kdK2haPRdgV5k1A3LJYi Electroneum: etnk4mvPSG49h6Hw4xgaQrTbjQyJ4fnUh6F6jFVM6xpAfrJtswC6AaiJepPCWF1PSNj4xiMXc8QXU7G cfFZvpUi422Z9F82eth Digibyte: DBtUYVhUrAXuDjjmAzNNWpcMWe6tJvWoEP
|
|
|
|
Fjstrydom
Member
Offline
Activity: 109
Merit: 10
|
|
February 01, 2018, 05:52:24 PM |
|
I built my first Cryptonight rig a few months back using Sapphire Pulse RX 570 and was able to get 915 h/s @ 95 watt on the wall. Due to high prices and unavailability of RX 570s, I decided to give RX 560s a shot. I am glad to mention that I am able to obtain 515 h/s @ 40 watt on the wall for AMD RX 560 while mining Electroneum/Sumokoin (will be true for all Cryptonight coins e.g., Monero, Karbo). You can see the proof of hashrate and clock settings at this link: https://imgur.com/a/q1iKkI am using sgminer-gm 5.5 with rawintensity 416 and worksize 8. The trick was to use 2 gpu threads in the config file as follows: "rawintensity": "416", "worksize": "8", "gpu-threads": "2" My GPU is Asus OC 2gb Polaris 14nm 1210 Ghz core and 1750 Mhz memory clock. It uses Elpida DDR5 memory. Its bios is modified using Polaris 1.6.6 editor's one click patch option and that was pretty much it. (I tried Sapphire RX Pulse 4gb version but could not get it above 410 h/s). I tried Crimson Beta 17.30 Blockchain driver but it kept on crashing. Finally managed to make Crimson relive 17.7 work. If you find the above post useful, please consider donating to following addresses: BTC: 3CW1WbDDtjfWprc7K4VQpNtJP7jsJMTbGF ETH: 0x134e57a0902eAb8019aE0dd7bC80cFd75B4b55f0 Sumokoin: Sumoo3NqEtVixhMfApYUzDa6AmomPypQ5AkHeMgfqTzG7G3nyQw5kbPSw9m69fKFJADMaVbnAkhpv86 kdK2haPRdgV5k1A3LJYi Electroneum: etnk4mvPSG49h6Hw4xgaQrTbjQyJ4fnUh6F6jFVM6xpAfrJtswC6AaiJepPCWF1PSNj4xiMXc8QXU7G cfFZvpUi422Z9F82eth Digibyte: DBtUYVhUrAXuDjjmAzNNWpcMWe6tJvWoEP can you maybe share your sgminer config? i cant get mine to work
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 04, 2018, 05:39:35 PM |
|
Sure mate,
Here it is:
{ "pools": [ { "name": "Etn", "url": "stratum+tcp://pool.etn.spacepools.org:5555", "user": "etnk4mvPSG49h6Hw4xgaQrTbjQyJ4fnUh6F6jFVM6xpAfrJtswC6AaiJepPCWF1PSNj4xiMXc8QXU7G cfFZvpUi422Z9F82eth", "pass": "choose the one you like", "profile": "Electroneum" }
], "profiles": [ { "name": "Electroneum", "algorithm": "cryptonight", "rawintensity": "416", "worksize": "8", "gpu-threads": "2"
} ], "default-profile": "Electroneum", "no-extranonce": true, "gpu-platform": "0", "remove-disabled" : true }
You can try gpu platform 0 or 1. Generally one of these two is the Intel's integrated gpu and the other one is your openCL platform. Save this as .conf file and then run a .bat file which has the following contents
@echo off
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
:loop sgminer -c name_of_your_conf_file.conf --gpu-reorder echo restart miner... goto loop
|
|
|
|
JohnTheMiningGuy
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 05, 2018, 01:20:24 AM |
|
Currently getting 420h/s on Hynix. Using Awesome miner, will this increase my hash rate?
|
|
|
|
elkaian
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 05, 2018, 06:06:10 AM |
|
can u upload your modified bios please
|
|
|
|
JohnTheMiningGuy
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 05, 2018, 10:32:03 PM |
|
I'm not at home, but all i did was use the one time click patch and overclock memory to 2100+.
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 05, 2018, 11:27:22 PM |
|
Currently getting 420h/s on Hynix. Using Awesome miner, will this increase my hash rate?
You can try using sgminer with two threads. With single thread on sgminer my speed was around 440 h/s. With two threads i was able to get 515 h/s.
|
|
|
|
JohnTheMiningGuy
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 06, 2018, 01:32:18 AM |
|
Sounds good, I haven't used SG miner. Any tutorials you recommend to get it set up? Getting 420h/s on Hynix and 460h/s Micron without your modified miner.
Thanks
|
|
|
|
EliotFR
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 06, 2018, 05:51:31 PM |
|
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 07, 2018, 04:02:11 PM |
|
Sounds good, I haven't used SG miner. Any tutorials you recommend to get it set up? Getting 420h/s on Hynix and 460h/s Micron without your modified miner.
Thanks
I do not have access to any tutorial at this point. But you can setup it very easily. All you have to do is setup a .bat file and config file. Above I have given examples of my .bat and config file. Simply copy and paste (change wallet and pool address accordingly).
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 07, 2018, 04:04:02 PM |
|
|
|
|
|
yyfong
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 07, 2018, 04:12:06 PM |
|
good, my Sapphire RX550 2G Pulse got only @470H/s, 1.4K for 3.
|
|
|
|
Branko
|
|
February 07, 2018, 05:16:23 PM |
|
good, my Sapphire RX550 2G Pulse got only @470H/s, 1.4K for 3.
Thats pretty good for such cheap card, according to whattomine site, Nvidia GTX 1080 has result 580, and you can buy 5-6 rx550 cards for the price of one GTX 1080
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 07, 2018, 06:15:13 PM |
|
good, my Sapphire RX550 2G Pulse got only @470H/s, 1.4K for 3.
This is good hash rate for RX 550. What are your mem and core clock settings?
|
|
|
|
lolopo
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 10, 2018, 08:22:34 AM |
|
I can't get the same numbers, saphire pulse 2gb lite, elpida ram, one click patch. 440-460 h/s
|
|
|
|
|
Steak12
Newbie
Offline
Activity: 9
Merit: 0
|
|
February 12, 2018, 02:38:35 PM |
|
Hey !
I've 6x Gigabyte RX560 4gb Micron Rev2 and i'm looking for the same hrate. Can you share a bios and the oc please ?
I've god 370h/s with SMOS and 1050/2000 OC
I would be grateful
|
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 12, 2018, 06:51:25 PM |
|
Hey !
I've 6x Gigabyte RX560 4gb Micron Rev2 and i'm looking for the same hrate. Can you share a bios and the oc please ?
I've god 370h/s with SMOS and 1050/2000 OC
I would be grateful
Hey Mate, I used Polaris 1.6.6 one click patch to modify the default bios. That was it. Not sure how to share a file on bitcointalk. My oc settings are 1130 for gpu and 1950 for memory. Btw, I am using Windows 10 and sgminer. So not sure about SMOS.
|
|
|
|
sam08016 (OP)
Jr. Member
Offline
Activity: 39
Merit: 1
|
|
February 12, 2018, 06:52:39 PM |
|
I can't get the same numbers, saphire pulse 2gb lite, elpida ram, one click patch. 440-460 h/s
I ran into the same issue with Sapphire pulse 560 4gb. Could not get over 410 h/s. So I switched to Asus 2gb card which gives 515 h/s
|
|
|
|
|