Razon (OP)
Jr. Member
Offline
Activity: 39
Merit: 3
|
|
February 02, 2018, 04:08:04 AM Last edit: February 07, 2018, 05:13:15 PM by Razon |
|
Using the BitmainTool app I accidentally saved 637.5 freq to 1 of my miners and they would not show anything in the Miner status page for over an hour. I loaded the latest firmware back onto them as they had that version before and still nothing.. BitmainTool says now failed to connect.. Please help. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 16800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768 [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984 [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB) [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB) [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB) [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to df802000 [ 0.000000] zynq_clock_init: clkc starts at df802100 [ 0.000000] Zynq clock init [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000313] ps7-ttc #0 at df804000, irq=43 [ 0.000622] Console: colour dummy device 80x30 [ 0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328) [ 0.040211] pid_max: default: 32768 minimum: 301 [ 0.040433] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.040453] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.042571] CPU: Testing write buffer coherency: ok [ 0.042911] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.042971] Setting up static identity map for 0x4c4b00 - 0x4c4b58 [ 0.043198] L310 cache controller enabled [ 0.043218] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.121039] CPU1: Booted secondary processor [ 0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210362] Brought up 2 CPUs [ 0.210381] SMP: Total of 2 processors activated. [ 0.210390] CPU: All CPU(s) started in SVC mode. [ 0.211065] devtmpfs: initialized [ 0.213476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.214691] regulator-dummy: no parameters [ 0.222376] NET: Registered protocol family 16 [ 0.224560] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.226858] cpuidle: using governor ladder [ 0.226872] cpuidle: using governor menu [ 0.234320] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.235841] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.235855] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.235971] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000 [ 0.257681] bio: create slab <bio-0> at 0 [ 0.259104] vgaarb: loaded [ 0.259814] SCSI subsystem initialized [ 0.260915] usbcore: registered new interface driver usbfs [ 0.261133] usbcore: registered new interface driver hub [ 0.261367] usbcore: registered new device driver usb [ 0.261904] media: Linux media interface: v0.10 [ 0.262067] Linux video capture interface: v2.00 [ 0.262307] pps_core: LinuxPPS API ver. 1 registered [ 0.262319] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.262450] PTP clock support registered [ 0.262806] EDAC MC: Ver: 3.0.0 [ 0.263871] Advanced Linux Sound Architecture Driver Initialized. [ 0.266711] DMA-API: preallocated 4096 debug entries [ 0.266726] DMA-API: debugging enabled by kernel config [ 0.266804] Switched to clocksource arm_global_timer [ 0.287356] NET: Registered protocol family 2 [ 0.288013] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.288069] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.288154] TCP: Hash tables configured (established 4096 bind 4096) [ 0.288198] TCP: reno registered [ 0.288216] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.288249] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.288482] NET: Registered protocol family 1 [ 0.288833] RPC: Registered named UNIX socket transport module. [ 0.288846] RPC: Registered udp transport module. [ 0.288854] RPC: Registered tcp transport module. [ 0.288862] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.288876] PCI: CLS 0 bytes, default 64 [ 0.289307] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.291332] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.293422] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.293623] msgmni has been set to 967 [ 0.294406] io scheduler noop registered [ 0.294420] io scheduler deadline registered [ 0.294466] io scheduler cfq registered (default) [ 0.307945] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.307965] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.430078] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 0.998186] console [ttyPS0] enabled [ 1.002464] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000 [ 1.010091] [drm] Initialized drm 1.1.0 20060810 [ 1.027168] brd: module loaded [ 1.036501] loop: module loaded [ 1.045959] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.051945] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.059862] libphy: XEMACPS mii bus: probed [ 1.064233] ------------- phy_id = 0x3625e62 [ 1.069190] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.077787] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.084407] ehci-pci: EHCI PCI platform driver [ 1.091661] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.098477] usbcore: registered new interface driver usb-storage [ 1.105338] mousedev: PS/2 mouse device common for all mice [ 1.111454] i2c /dev entries driver [ 1.118462] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.123947] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.129871] Xilinx Zynq CpuIdle Driver started [ 1.134701] sdhci: Secure Digital Host Controller Interface driver [ 1.140947] sdhci: Copyright(c) Pierre Ossman [ 1.145216] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.152042] mmc0: no vqmmc regulator found [ 1.156052] mmc0: no vmmc regulator found [ 1.196853] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.205545] usbcore: registered new interface driver usbhid [ 1.211057] usbhid: USB HID core driver [ 1.215781] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.222089] nand: Micron MT29F2G08ABAEAWP [ 1.226048] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.231987] Bad block table found at page 131008, version 0x01 [ 1.238218] Bad block table found at page 130944, version 0x01 [ 1.244266] 3 ofpart partitions found on MTD device pl353-nand [ 1.250048] Creating 3 MTD partitions on "pl353-nand": [ 1.255142] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.263199] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.270529] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.279465] TCP: cubic registered [ 1.282703] NET: Registered protocol family 17 [ 1.287420] Registering SWP/SWPB emulation handler [ 1.293305] regulator-dummy: disabling [ 1.297650] UBI: attaching mtd1 to ubi0 [ 1.675949] UBI: scanning is finished [ 1.687822] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.694880] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.701676] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.708353] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.715190] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.721200] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.728311] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1134783803 [ 1.737341] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.746538] UBI: background thread "ubi_bgt0d" started, PID 1080 [ 1.746543] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.750488] ALSA device list: [ 1.750492] No soundcards found. [ 1.767413] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082 [ 1.887381] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 1.893312] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 1.902448] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 1.912328] UBIFS: reserved for root: 0 bytes (0 KiB) [ 1.917367] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model [ 1.939799] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 1.988622] devtmpfs: mounted [ 1.991726] Freeing unused kernel memory: 204K (c06d2000 - c0705000) [ 3.159338] random: dd urandom read with 0 bits of entropy available [ 3.756860] [ 3.756860] bcm54xx_config_init [ 4.366830] [ 4.366830] bcm54xx_config_init [ 8.367658] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz [ 8.373762] xemacps e000b000.ps7-ethernet: link up (1000/FULL) [ 21.610460] In axi fpga driver! [ 21.613532] request_mem_region OK! [ 21.616952] AXI fpga dev virtual address is 0xdf9fc000 [ 21.622030] *base_vir_addr = 0x8c510 [ 21.637761] In fpga mem driver! [ 21.640831] request_mem_region OK! [ 21.644393] fpga mem virtual address is 0xe2000000 [ 22.426848] [ 22.426848] bcm54xx_config_init [ 23.056830] [ 23.056830] bcm54xx_config_init [ 27.057869] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz [ 27.063973] xemacps e000b000.ps7-ethernet: link up (1000/FULL) [ 599.991546] random: nonblocking pool is initialized do heat board 8xPatten for 1 times start send works on chain[5] start send works on chain[6] start send works on chain[7] get send work num :57456 on Chain[5] get send work num :57456 on Chain[6] get send work num :57456 on Chain[7] wait recv nonce on chain[5] wait recv nonce on chain[6] wait recv nonce on chain[7] get nonces on chain[5] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631 freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631 freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631 freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631 freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631 freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631 freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631 freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:25867 last_nonce_num:42886 get nonces on chain[6] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631 freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631 freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631 freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631 freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631 freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631 freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631 freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:25871 last_nonce_num:35774 get nonces on chain[7] require nonce number:912 require validnonce number:57456 asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912 asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912 asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912 asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912 asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912 asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912 asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912 asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631 freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631 freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631 freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631 freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631 freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631 freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631 freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456 total send work number:57456 require valid nonce number:57456 repeated_nonce_num:0 err_nonce_num:25897 last_nonce_num:35770 chain[5]: All chip cores are opened OK! Test Patten on chain[5]: OK! chain[6]: All chip cores are opened OK! Test Patten on chain[6]: OK! chain[7]: All chip cores are opened OK! Test Patten on chain[7]: OK! restartNum = 2 , auto-reinit enabled... setStartTimePoint total_tv_start_sys=794 total_tv_end_sys=795 do read_temp_func once... do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63) Asic[01]=32.0610 Asic[02]=30.0980 Asic[03]=30.1310 Asic[04]=30.6010 Asic[05]=31.5570 Asic[06]=30.5000 Asic[07]=31.4900 Asic[08]=31.1720 Asic[09]=31.1880 Asic[10]=30.8860 Asic[11]=30.9870 Asic[12]=30.9530 Asic[13]=30.8860 Asic[14]=185.539 Asic[15]=30.7190 Asic[16]=30.2820 Asic[17]=30.6680 Asic[18]=30.4670 Asic[19]=30.6510 Asic[20]=31.4900 Asic[21]=31.6580 Asic[22]=29.7460 Asic[23]=30.8860 Asic[24]=29.8800 Asic[25]=31.0880 Asic[26]=31.3560 Asic[27]=31.2220 Asic[28]=30.9030 Asic[29]=33.8560 Asic[30]=31.7250 Asic[31]=29.5950 Asic[32]=30.6850 Asic[33]=29.7460 Asic[34]=30.2660 Asic[35]=30.6680 Asic[36]=30.7020 Asic[37]=31.4230 Asic[38]=31.4230 Asic[39]=30.6850 Asic[40]=30.6180 Asic[41]=30.2150 Asic[42]=31.2390 Asic[43]=135.140 Asic[44]=62.9140 Asic[45]=31.2720 Asic[46]=31.1880 Asic[47]=30.9030 Asic[48]=184.213 Asic[49]=29.5110 Asic[50]=77.8290 Asic[51]=30.4500 Asic[52]=532.106 Asic[53]=31.0210 Asic[54]=31.2550 Asic[55]=30.7020 Asic[56]=31.1880 Asic[57]=32.9670 Asic[58]=30.1980 Asic[59]=31.1720 Asic[60]=30.7350 Asic[61]=31.0040 Asic[62]=29.8460 Asic[63]=31.2720
get RT hashrate from Chain[6]: (asic index start from 1-63) Asic[01]=29.9970 Asic[02]=28.2020 Asic[03]=28.2860 Asic[04]=28.5710 Asic[05]=29.5950 Asic[06]=28.3870 Asic[07]=244.192 Asic[08]=29.5110 Asic[09]=29.2250 Asic[10]=28.9910 Asic[11]=29.0410 Asic[12]=29.1920 Asic[13]=28.9400 Asic[14]=173.946 Asic[15]=28.7890 Asic[16]=28.4700 Asic[17]=29.0070 Asic[18]=28.5710 Asic[19]=28.6380 Asic[20]=29.2420 Asic[21]=29.7620 Asic[22]=27.9670 Asic[23]=28.9570 Asic[24]=28.0510 Asic[25]=29.1420 Asic[26]=29.3930 Asic[27]=29.2930 Asic[28]=29.0240 Asic[29]=32.0610 Asic[30]=29.4770 Asic[31]=27.6650 Asic[32]=28.7890 Asic[33]=27.8330 Asic[34]=28.3700 Asic[35]=28.7390 Asic[36]=28.9230 Asic[37]=29.5110 Asic[38]=29.2590 Asic[39]=28.7560 Asic[40]=28.6890 Asic[41]=28.2690 Asic[42]=29.3930 Asic[43]=497.981 Asic[44]=59.0720 Asic[45]=29.3090 Asic[46]=29.2250 Asic[47]=28.9570 Asic[48]=172.788 Asic[49]=27.6650 Asic[50]=28.2020 Asic[51]=28.5380 Asic[52]=29.2760 Asic[53]=29.1420 Asic[54]=29.0910 Asic[55]=28.7720 Asic[56]=29.3930 Asic[57]=30.9870 Asic[58]=28.0680 Asic[59]=29.0410 Asic[60]=28.9230 Asic[61]=29.0910 Asic[62]=27.9670 Asic[63]=29.2420
get RT hashrate from Chain[7]: (asic index start from 1-63) Asic[01]=26.4070 Asic[02]=24.7630 Asic[03]=24.7960 Asic[04]=25.1820 Asic[05]=25.9870 Asic[06]=24.9810 Asic[07]=214.597 Asic[08]=25.9200 Asic[09]=25.6690 Asic[10]=25.5340 Asic[11]=25.5010 Asic[12]=25.6690 Asic[13]=25.4170 Asic[14]=152.957 Asic[15]=25.2830 Asic[16]=25.0480 Asic[17]=25.6350 Asic[18]=25.0980 Asic[19]=25.1490 Asic[20]=25.7020 Asic[21]=26.1550 Asic[22]=24.5610 Asic[23]=25.4170 Asic[24]=24.6280 Asic[25]=25.6020 Asic[26]=25.8200 Asic[27]=25.7020 Asic[28]=25.5510 Asic[29]=26.1050 Asic[30]=25.9200 Asic[31]=24.3600 Asic[32]=25.3830 Asic[33]=24.4610 Asic[34]=24.9300 Asic[35]=25.2320 Asic[36]=25.4340 Asic[37]=25.8200 Asic[38]=25.7020 Asic[39]=25.2490 Asic[40]=25.1990 Asic[41]=24.8300 Asic[42]=25.8870 Asic[43]=24.9980 Asic[44]=51.8910 Asic[45]=65.0950 Asic[46]=25.6850 Asic[47]=25.4340 Asic[48]=151.900 Asic[49]=24.2930 Asic[50]=24.7460 Asic[51]=25.0650 Asic[52]=25.7020 Asic[53]=25.6020 Asic[54]=25.6020 Asic[55]=25.2660 Asic[56]=25.7020 Asic[57]=25.1990 Asic[58]=24.6790 Asic[59]=25.5510 Asic[60]=25.3330 Asic[61]=25.5510 Asic[62]=24.5610 Asic[63]=25.7020 Check Chain[J6] ASIC RT error: (asic index start from 1-63) Asic[14]=185.539000 Asic[43]=135.140000 Asic[48]=184.213000 Asic[52]=532.106000 Check Chain[J7] ASIC RT error: (asic index start from 1-63) Asic[07]=244.192000 Asic[14]=173.946000 Asic[43]=497.981000 Asic[48]=172.788000 Check Chain[J8] ASIC RT error: (asic index start from 1-63) Asic[07]=214.597000 Asic[14]=152.957000 Asic[48]=151.900000 Done check_asic_reg do read temp on Chain[5] Chain[5] Chip[62] TempTypeID=55 middle offset=30 Chain[5] Chip[62] local Temp=65 Chain[5] Chip[62] middle Temp=75 Special fix Chain[5] Chip[62] middle Temp = 80 Done read temp on Chain[5] do read temp on Chain[6] Chain[6] Chip[62] TempTypeID=55 middle offset=29 Chain[6] Chip[62] local Temp=61 Chain[6] Chip[62] middle Temp=72 Special fix Chain[6] Chip[62] middle Temp = 76 Done read temp on Chain[6] do read temp on Chain[7] Chain[7] Chip[62] TempTypeID=55 middle offset=26 read failed, old value: Chain[7] Chip[62] local Temp=62 Chain[7] Chip[62] middle Temp=71 Special fix Chain[7] Chip[62] middle Temp = 77 Done read temp on Chain[7] Set fixed full fan speed FAN PWM: 100 read_temp_func Done! CRC error counter=0
(Moderator's note: This post was edited by frodocooper to use code tags for the log.)
|