Expanding my setup

[techkojj92]

Base computer: HP Envy 17t


Controller Hub: Anker 4 port 3.0

Mining Power 18 Erupters and 2 fans running with 2 anker unspeed 10 ports

When i added just another base Anker 10 port windows said i exceeded resources.

wheres the weak link? the fact im running all 3.0?

Stuck

[1714183835]

1714183835

[1714183835]

1714183835

[1714183835]

1714183835

[DennisD7]

Sounds like it could be a driver problem maybe?
Could you try and skip the 4 port hub and just connect the three hubs directly to your computer? That's how I run at the moment. USB 2.0 works fine with erupters and that hub type.

http://24.media.tumblr.com/0eb8a6c52c71969430a3a477b7093fd1/tumblr_ms1c8rSm7i1qa6usno1_500.jpg

[Walking Glitch]

You're probably trying to chain too many hubs. Each of those 10 port Anker hubs is actually 3 four port hubs chained together, and there is a limit of four hubs from the controller. Chances are onen of the ports in your laptop is actually a branch off of an internal hub. Try using a different plug on your computer.

[Gws24]

The problem could lie in the use of usb 3.0 and cgminer; if that is what you are using. In one of the threads on this forum Kano said something to that effect.

EDIT: Found this post from Kano https://bitcointalk.org/index.php?topic=220450.msg2344786#msg2344786 mentioning the usb 3.0 problem but that is from june 2nd so you might have to look a little further to see if it's solved or not

[fractalbc]

Base computer: HP Envy 17t


Controller Hub: Anker 4 port 3.0

Mining Power 18 Erupters and 2 fans running with 2 anker unspeed 10 ports

When i added just another base Anker 10 port windows said i exceeded resources.

wheres the weak link? the fact im running all 3.0?

Stuck

Did you plug the new Anker 10 port hub into the Anker 4 port hub or one of the other Anker 10 port hubs?