Etherem Mining with 1050ti

[smartcrypto]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

[giveen1]

Its fine

[buboyskie]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Hi may I ask your Net income every month if you don't mind? Because I'm planning to build mining rig with 13 GPUs of 1050ti and will mine Ethereum. I just want to know if this setup is still profitable as of now? And how long the ROI will be? Thank you so much in advance.

[TrynaFindaWay]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

[smartcrypto]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Hi may I ask your Net income every month if you don't mind? Because I'm planning to build mining rig with 13 GPUs of 1050ti and will mine Ethereum. I just want to know if this setup is still profitable as of now? And how long the ROI will be? Thank you so much in advance.

with 47mh. I was making $5 for 24 hours with 3x 1050ti. But it has decreased with decreased btc prices. If btc recovers it is back to normal. but for now, it's decreased to $3.30 every 24 hours.
power consumptions are 55w each gpu. and a normal pc consumption for mobo, display etc.
$150 a month makes me ROI to be 3 months. (if the btc prices are recovered, or the difficulty is decreased on the coins). my electricity bill is not a lot where I live.

[smartcrypto]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

no simplemining OS. just Claymore 10.3 on windows 10. I get 12.5 without the MSI afterburner OC. With oc settings, the hashrates are increased to ~15.7 without a crash. Ran them for days.

[buboyskie]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Hi may I ask your Net income every month if you don't mind? Because I'm planning to build mining rig with 13 GPUs of 1050ti and will mine Ethereum. I just want to know if this setup is still profitable as of now? And how long the ROI will be? Thank you so much in advance.

with 47mh. I was making $5 for 24 hours with 3x 1050ti. But it has decreased with decreased btc prices. If btc recovers it is back to normal. but for now, it's decreased to $3.30 every 24 hours.
power consumptions are 55w each gpu. and a normal pc consumption for mobo, display etc.
$150 a month makes me ROI to be 3 months. (if the btc prices are recovered, or the difficulty is decreased on the coins). my electricity bill is not a lot where I live.

Oh I see it's a little bit pricey electricity where I live. But in your setup it is still profitable I'm ok now I'm just waiting for my funds and I will proceed on setting up the rig I want. Thank you so much for sharing. Goodluck to us more to mine.

[SergioShved]

Cлишкoм мaлeнький дoxoд пoлyчaeтcя и дoлгий cpoк oкyпaeмocти

[androstan1234]

Very nice.  You should get 3 or 4 8-card rigs going.  Efficiency is strong.

[smartcrypto]

Cлишкoм мaлeнький дoxoд пoлyчaeтcя и дoлгий cpoк oкyпaeмocти

Agreed, mine newly released altcoins for fast payback. that's what interests me. Ethereum is merely tests

[smartcrypto]

Very nice.  You should get 3 or 4 8-card rigs going.  Efficiency is strong.

Yeah, but gpu prices have gone up a bit

[CryptoTony3]

I am mining with GTX 1060 cards - have you thought about those instead of 1050ti? I get about 20mh/s.... per card

[Turkish88]

Its depended also from memory chip vendors 13 or 15 mh/s result.
Miners say what 1030 also good for mining, if price for 1050 icrease high i go to buy 1030 say one of miner

[smartcrypto]

Its depended also from memory chip vendors 13 or 15 mh/s result.
Miners say what 1030 also good for mining, if price for 1050 icrease high i go to buy 1030 say one of miner

i have both micron and samsung.

[Xazax310]

If your running claymore you should check reject shares by pressing "S" you can see if the shares your 1050ti's is submitting, some may have them if your OCing them to high, which I suspect you do, because +1000 mem OC may not crash your cards outright but you will see your GPUs have a ton of rejected shares.

[TrynaFindaWay]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

no simplemining OS. just Claymore 10.3 on windows 10. I get 12.5 without the MSI afterburner OC. With oc settings, the hashrates are increased to ~15.7 without a crash. Ran them for days.

Damn, that is good, I might have to move to Windows 10. I just set up my mining rig using Simple Mining OS

[CryptoPicknAxe]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

no simplemining OS. just Claymore 10.3 on windows 10. I get 12.5 without the MSI afterburner OC. With oc settings, the hashrates are increased to ~15.7 without a crash. Ran them for days.

Damn, that is good, I might have to move to Windows 10. I just set up my mining rig using Simple Mining OS

Those are really good numbers, but as another poster stated, check your reject rates. On my 1050ti's, I get about 14.2mh using ethminer. With Claymore, I get slightly less hash rate and many more rejects.

[smartcrypto]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

no simplemining OS. just Claymore 10.3 on windows 10. I get 12.5 without the MSI afterburner OC. With oc settings, the hashrates are increased to ~15.7 without a crash. Ran them for days.

Damn, that is good, I might have to move to Windows 10. I just set up my mining rig using Simple Mining OS

Those are really good numbers, but as another poster stated, check your reject rates. On my 1050ti's, I get about 14.2mh using ethminer. With Claymore, I get slightly less hash rate and many more rejects.

sometimes i have no rejects at all. but maybe because i mine other ethash coins..not ethereum

[CryptoTony3]

I am getting 15.7mh/s on each card with power limit set to 70% of 75tdp.
cards are running 24/7 without a crash. I am using onboard graphics for display though.

memclock +1000
core clock +0

no voltage changes.

using claymore eth miner.

I wonder if it's safe to run it at +1000 memclock.


GPU0 t=46C fan=35%, GPU1 t=54C fan=51%, GPU2 t=64C fan=50%

i am mining pirl.

https://imgur.com/a/Pgy1l

Are you using SimpleMining OS for your rig and are you using claymore miner? My 1050 TIs are only getting about 13.38 I'll use your settings and test

no simplemining OS. just Claymore 10.3 on windows 10. I get 12.5 without the MSI afterburner OC. With oc settings, the hashrates are increased to ~15.7 without a crash. Ran them for days.

Damn, that is good, I might have to move to Windows 10. I just set up my mining rig using Simple Mining OS

Those are really good numbers, but as another poster stated, check your reject rates. On my 1050ti's, I get about 14.2mh using ethminer. With Claymore, I get slightly less hash rate and many more rejects.

sometimes i have no rejects at all. but maybe because i mine other ethash coins..not ethereum

I used to mine ETH with Claymore, I do not recall which version, I am not at my mining rigs right now. But I did not get many rejects. Is the high reject rate something to do with the newer versions? Can anyone give feedback please.

I know there was big difference in Nvidia card performance due to memory chip type. Could that also have an effect?

Just throwing out ideas for more experienced to answer if they can.....

[smartcrypto]

If your running claymore you should check reject shares by pressing "S" you can see if the shares your 1050ti's is submitting, some may have them if your OCing them to high, which I suspect you do, because +1000 mem OC may not crash your cards outright but you will see your GPUs have a ton of rejected shares.

there are hardly any rejects. at least on the pools I mined always said 100% accept. But I will check on miner too