|
February 04, 2018, 09:58:22 PM |
|
Anyone got some good pictures of how to physically mount a server PSU to an open air GPU rig? I'm running a standard 550W ATX PSU and an HP 1200W Server PSU with a breakout board for an 8 GPU open air rig. The ATX PSU is very simple to mount, just drill a hole in the angled iron and put 1 screw through, no problem, but my server PSU is just sitting on the bottom of my rig, not secured down. Obviously I don't move it around very often, if ever, but I'd still like to have it secured somehow.
I used angle aluminum for the frame, with some wooden 1x3 boards across the bottom to mount the motherboard on.
Just looking for ideas of how other people mounted the server PSU. I was expecting it to be bigger, so I've actually got a lot of room to mount it in. It's also a lot louder than I was expecting, that little 20mm fan or whatever tiny size it is, is louder than all my GPUs put together.
|