Hey all, this is the first initial public release of this firmware that some friends and I have been using for quite some time now. It was only until recently that I was able to activate the voltage mods that Blissz is using in his firmware release so I thought it was about time I put this out there.
http://s000.tinyupload.com/?file_id=63466301611622195107*When upgrading please do not save your settings for this initial release.
In addition to this firmware allowing you to change the voltage from the web interface, you can also setup email alerts and monitor your D3 from
emoncms.org. The image below is a representation of what you can do with the highly customizable dashboard.
http://image.ibb.co/iNHY5c/emon.pngFor those of you that are not familiar with emoncms, here is a brief description taken from their website: Emoncms is a powerful open-source web-app for processing, logging and visualising energy, temperature and other environmental data.
Limitations & Additional InfoEmail alerts (MSMTP):-Currently only gmail is supported from web interface, but you can probably manually telnet and modify the msmtp config file in /config/msmtp.conf for others
-This will alert you of an issue with the hash rate when it falls below a certain threshold you can set, also auto reboots when below this threshold, if you don't want it to reboot you can set it to a high threshold (default) but this will also disable email alerts for now
Emoncms:-You can host your own emoncms instance but the API is slightly different and only emoncms.org is supported in the web interface at this time
-Logging of temperature and hash rate is only supported this time
Voltage mod:-only a global setting is available at this time unlike Blissz's firmware where you can set voltage per chain, maybe Blissz will release his source code soon and I can add it in with little effort
Cgminer:-still using 4.9.0
-fan RPM checks are disabled
-I am using quotas and there is an additional fourth pool added in the web interface pool section and they need to be entered as quota urls. If you want to continue using as normal priority pool just leave load balance unchecked.
And, Yes, of course the cgminer source is available here:
https://github.com/conkeronlive/cgminer-dashThere is absolutely no dev fee for this firmware, however I am appreciative of bitcoin or ether donations
As always, mods like this might void the warranty. Bitmain is under no obligation to honor your warranty should this firmware cause any damage.
Thank you and enjoy!
BONUS: I do plan on adding emoncms and email alert support to the S9 in the near future. For now here is a compiled version of bmminer that disables fan RPM checks for those of you trying to install custom fans. The temperature check is of course still in place.
binary-
http://s000.tinyupload.com/?file_id=06353882229315219418Source-
https://github.com/conkeronlive/bmminer-mix-Conker
