Here is the Kernel log. The whole thing wouldn't fit because it exceeded 64000 characters. Hopefully its enough info. Do you see anything that would be an issue?
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0934000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 236136k/236136k available, 26008k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000354] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015410] pid_max: default: 32768 minimum: 301
[ 0.015644] Security Framework initialized
[ 0.015737] Mount-cache hash table entries: 512
[ 0.025655] Initializing cgroup subsys cpuacct
[ 0.025689] Initializing cgroup subsys memory
[ 0.025753] Initializing cgroup subsys blkio
[ 0.025900] CPU: Testing write buffer coherency: ok
[ 0.026433] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026506] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027905] Brought up 1 CPUs
[ 0.027928] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029223] devtmpfs: initialized
[ 0.093749] pinctrl core: initialized pinctrl subsystem
[ 0.093966] rstctl core: initialized rstctl subsystem
[ 0.094467] regulator-dummy: no parameters
[ 0.094982] NET: Registered protocol family 16
[ 0.095755] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105530] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106311] platform 49000000.edma: alias fck already exists
[ 0.106344] platform 49000000.edma: alias fck already exists
[ 0.106373] platform 49000000.edma: alias fck already exists
[ 0.107582] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107768] OMAP GPIO hardware version 0.1
[ 0.109112] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110437] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111895] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112425] of_get_named_gpio_flags exited with status 52
[ 0.112457] gpio-rctrl rstctl.3: loaded OK
[ 0.117273] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120525] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122728] cpsw.0: No hwaddr in dt. Using d0:5f:b8:ec:ca:72 from efuse
[ 0.122760] cpsw.1: No hwaddr in dt. Using d0:5f:b8:ec:ca:74 from efuse
[ 0.138266] bio: create slab <bio-0> at 0
[ 0.150446] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150681] of_get_named_gpio_flags: can't parse gpios property
[ 0.150897] vmmcsd_fixed: 3300 mV
[ 0.153960] SCSI subsystem initialized
[ 0.154447] usbcore: registered new interface driver usbfs
[ 0.154583] usbcore: registered new interface driver hub
[ 0.154862] usbcore: registered new device driver usb
[ 0.156937] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158455] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160198] DCDC1: at 1500 mV
[ 0.161343] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 0.162529] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.163626] LDO1: at 1800 mV
[ 0.164774] LDO2: at 3300 mV
[ 0.166697] LDO3: 1800 mV
[ 0.167852] LDO4: at 3300 mV
[ 0.168845] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.169534] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170328] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.172689] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.172925] media: Linux media interface: v0.10
[ 0.173030] Linux video capture interface: v2.00
[ 0.173154] pps_core: LinuxPPS API ver. 1 registered
[ 0.173171] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.174041] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175197] Switching to clocksource gp_timer
[ 0.193442] NET: Registered protocol family 2
[ 0.194456] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.194544] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.194636] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.194729] TCP: reno registered
[ 0.194755] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.194869] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195290] NET: Registered protocol family 1
[ 0.195856] RPC: Registered named UNIX socket transport module.
[ 0.195880] RPC: Registered udp transport module.
[ 0.195894] RPC: Registered tcp transport module.
[ 0.195908] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196284] Trying to unpack rootfs image as initramfs...
[ 2.119426] Freeing initrd memory: 14772K
[ 2.120100] CPU PMU: probing PMU on CPU 0
[ 2.120133] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.120744] omap2_mbox_probe: platform not supported
[ 2.124641] VFS: Disk quotas dquot_6.5.2
[ 2.124879] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.126172] NFS: Registering the id_resolver key type
[ 2.126277] Key type id_resolver registered
[ 2.126293] Key type id_legacy registered
[ 2.126361] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.126884] msgmni has been set to 490
[ 2.129670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.129696] io scheduler noop registered
[ 2.129712] io scheduler deadline registered
[ 2.129766] io scheduler cfq registered (default)
[ 2.131580] tps65217-bl tps65217-bl: no platform data provided
[ 2.131621] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.132592] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.135215] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.135509] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.852619] console [ttyO0] enabled
[ 2.857492] [drm] Initialized drm 1.1.0 20060810
[ 2.876114] brd: module loaded
[ 2.886440] loop: module loaded
[ 2.889899] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.897185] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.904457] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.911727] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.918998] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.956575] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.495639] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.034694] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.573755] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.112817] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.651879] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.190947] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.730005] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.269068] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.808130] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.316108] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.323176] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.332710] nand_get_flash_type: 2c,da against 2c,da
[ 8.338232] ONFI param page 0 valid
[ 8.341903] ONFI flash detected
[ 8.345221] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.357131] omap2-nand: detected x8 NAND flash
[ 8.361794] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.367398] omap2-nand: using custom ecc layout
[ 8.372234] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.378625] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.384297] 0x000000000000-0x000000020000 : "spl"
[ 8.391175] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.398634] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.406046] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.413318] 0x000000080000-0x000000240000 : "u-boot"
[ 8.421586] 0x000000240000-0x000000260000 : "bootenv"
[ 8.428552] 0x000000260000-0x000000280000 : "fdt"
[ 8.435171] 0x000000280000-0x000000780000 : "kernel"
[ 8.446193] 0x000000800000-0x000001c00000 : "root"
[ 8.469601] 0x000001c00000-0x000003000000 : "config"
[ 8.493385] OneNAND driver initializing
[ 8.500860] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.508147] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.518429] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.525719] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.534971] usbcore: registered new interface driver asix
[ 8.540808] usbcore: registered new interface driver cdc_ether
[ 8.547092] usbcore: registered new interface driver smsc95xx
[ 8.553218] usbcore: registered new interface driver net1080
[ 8.559241] usbcore: registered new interface driver cdc_subset
[ 8.565549] usbcore: registered new interface driver zaurus
[ 8.571535] usbcore: registered new interface driver cdc_ncm
[ 8.578292] usbcore: registered new interface driver cdc_acm
[ 8.584247] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.592626] Initializing USB Mass Storage driver...
[ 8.597850] usbcore: registered new interface driver usb-storage
[ 8.604149] USB Mass Storage support registered.
[ 8.609172] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.615832] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.621069] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.629832] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.629854] musb-hdrc: MHDRC RTL version 2.0
[ 8.629868] musb-hdrc: setup fifo_mode 4
[ 8.629897] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.630046] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.635089] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.641034] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.646283] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.655047] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.655067] musb-hdrc: MHDRC RTL version 2.0
[ 8.655081] musb-hdrc: setup fifo_mode 4
[ 8.655104] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.655224] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.660265] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.665573] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.671979] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.680216] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.680328] usb usb1: default language 0x0409
[ 8.680385] usb usb1: udev 1, busnum 1, minor = 0
[ 8.680409] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.687536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.695106] usb usb1: Product: MUSB HDRC host driver
[ 8.700319] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.705984] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.711862] usb usb1: usb_probe_device
[ 8.711891] usb usb1: configuration #1 chosen from 1 choice
[ 8.711957] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.712165] hub 1-0:1.0: usb_probe_interface
[ 8.712187] hub 1-0:1.0: usb_probe_interface - got id
[ 8.712215] hub 1-0:1.0: USB hub found
[ 8.716251] hub 1-0:1.0: 1 port detected
[ 8.720416] hub 1-0:1.0: standalone hub
[ 8.720436] hub 1-0:1.0: individual port power switching
[ 8.720455] hub 1-0:1.0: no over-current protection
[ 8.720472] hub 1-0:1.0: Single TT
[ 8.720493] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.720513] hub 1-0:1.0: power on to power good time: 10ms
[ 8.720557] hub 1-0:1.0: local power source is good
[ 8.720664] hub 1-0:1.0: enabling power on all ports
[ 8.721706] mousedev: PS/2 mouse device common for all mice
[ 8.730077] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.737554] 44e3e000.rtc: already running
[ 8.742044] i2c /dev entries driver
[ 8.747410] pps_ldisc: PPS line discipline registered
[ 8.752888] Driver for 1-wire Dallas network protocol.
[ 8.760136] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.767694] cpuidle: using governor ladder
[ 8.772015] cpuidle: using governor menu
[ 8.776565] of_get_named_gpio_flags exited with status 6
[ 8.776584] of_get_named_gpio_flags: can't parse gpios property
[ 8.776600] of_get_named_gpio_flags: can't parse gpios property
[ 8.776636] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.783855] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.790683] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.797880] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.805211] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.812190] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.821926] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.845778] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.857474] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.864780] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.873808] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.881039] of_get_named_gpio_flags exited with status 53
[ 8.881063] of_get_named_gpio_flags exited with status 54
[ 8.881085] of_get_named_gpio_flags exited with status 55
[ 8.881105] of_get_named_gpio_flags exited with status 56
[ 8.881139] of_get_named_gpio_flags exited with status 53
[ 8.881434] of_get_named_gpio_flags exited with status 54
[ 8.881651] of_get_named_gpio_flags exited with status 55
[ 8.881843] of_get_named_gpio_flags exited with status 56
[ 8.882450] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.889165] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.896358] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.904498] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.910780] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.917982] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.930422] usbcore: registered new interface driver usbhid
[ 8.936333] usbhid: USB HID core driver
[ 8.943300] TCP: cubic registered
[ 8.946815] Initializing XFRM netlink socket
[ 8.951371] NET: Registered protocol family 17
[ 8.956189] NET: Registered protocol family 15
[ 8.961043] Key type dns_resolver registered
[ 8.965686] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.973797] ThumbEE CPU extension supported.
[ 8.978398] Registering SWP/SWPB emulation handler
[ 8.984395] registered taskstats version 1
[ 9.040574] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.046989] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.061399] libphy: 4a101000.mdio: probed
[ 9.065700] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.075579] Detected MACID = d0:5f:b8:ec:ca:72
[ 9.080270] cpsw 4a100000.ethernet: NAPI disabled
[ 9.086922] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.103309] ALSA device list:
[ 9.106448] No soundcards found.
[ 9.110628] Freeing init memory: 264K
[ 9.114546] Failed to execute /init
[ 9.377138] compile Dec 3 2015--15:59:46
[ 9.381421] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.385460] spi_vaddr 0xfa1a0000
[ 9.388847] version 0x40300a0b
[ 9.392043] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.395875] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.399706] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.407820] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.420635] hash ok
[ 9.422905] hashtest OK
[ 9.425724] bitmain-asic: success to register device
[ 9.435373] Detect hardware version = 4
[ 9.439452] fix hardware version
[ 9.442850] hardware_version = 0x4
[ 9.446515] S5 ctrl board test V1.1
[ 9.450423] bitmain_asic_open ok
[ 10.810543] stop send work to all chain
[ 10.815754] Sending open core work
[ 10.820690] Send new block cmd
[ 10.925295] Division by zero in kernel.
[ 10.929355] [<c001051d>] (unwind_backtrace+0x1/0x8c) from [<c0193c53>] (Ldiv0+0x9/0x12)
[ 10.937777] [<c0193c53>] (Ldiv0+0x9/0x12) from [<bf805843>] (nonce_query+0x4e/0xe4 [bitmain_spi])
[ 10.947082] [<bf805843>] (nonce_query+0x4e/0xe4 [bitmain_spi]) from [<bf801891>] (bitmain_asic_close+0x68/0x114 [bitmain_spi])
[ 10.958995] [<bf801891>] (bitmain_asic_close+0x68/0x114 [bitmain_spi]) from [<c0094f27>] (__fput+0x9b/0x154)
[ 10.969267] [<c0094f27>] (__fput+0x9b/0x154) from [<c003b13d>] (task_work_run+0x79/0x8c)
[ 10.977745] [<c003b13d>] (task_work_run+0x79/0x8c) from [<c000eb75>] (do_work_pending+0x51/0x5c)
[ 10.986929] [<c000eb75>] (do_work_pending+0x51/0x5c) from [<c000c693>] (work_pending+0x9/0x1a)
[ 10.995929] timeout {0x189b}
[ 10.998943] rev timeout {0x9b180080}
[ 11.002762] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 11.010961] send BC data:
[ 11.010961] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.024900] send BC data:
[ 11.024900] 0x0000: 0x03 0x02 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.042474] send BC data:
[ 11.042474] 0x0000: 0x03 0x05 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.153809] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.162261] send BC data:
[ 11.162261] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.177240] send BC data:
[ 11.177240] 0x0000: 0x03 0x02 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.194818] send BC data:
[ 11.194818] 0x0000: 0x03 0x05 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.306151] bitmain_asic_close
[ 11.855368] jffs2: notice: (148) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.652829] net eth0: initializing cpsw version 1.12 (0)
[ 12.660663] net eth0: phy found : id is : 0x7c0f1
[ 12.665644] libphy: PHY 4a101000.mdio:01 not found
[ 12.670677] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 16.806706] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 36.821276] bitmain-asic: success to unregister device
[ 37.843454] compile Dec 3 2015--15:59:46
[ 37.847706] CM_PER_SPI1_CLKCTRL 0x2
[ 37.851372] spi_vaddr 0xfa1a0000
[ 37.854753] version 0x40300a0b
[ 37.857948] OMAP2_MCSPI_SYSSTATUS 0x1
[ 37.861775] OMAP2_MCSPI_MODULCTRL 0x1
[ 37.865608] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 37.869927] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 37.878146] hash ok
[ 37.880394] hashtest OK
[ 37.883195] bitmain-asic: success to register device
[ 38.011527] Detect hardware version = 4
[ 38.015599] fix hardware version
[ 38.018981] hardware_version = 0x4
[ 38.025125] S5 ctrl board test V1.1
[ 38.034827] bitmain_asic_open ok
[ 38.053196] Detect device
[ 38.056045] soft ctrl rst time
[ 38.061224] reset hash asic
[ 38.064227] clear FPGA nonce buffer
[ 39.069835] soft ctrl rst time
[ 39.073139] reset hash asic
[ 39.076068] clear FPGA nonce buffer
[ 40.179224] get chain0 reg0x0
[ 40.182354] send BC data:
[ 40.182354] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 40.288649] asic cmd return 00988513
[ 40.292400] asic cmd return 00988513
[ 40.296146] asic cmd return 00988513
[ 40.299889] asic cmd return 00988513
[ 40.303632] asic cmd return 00988513
[ 40.307439] asic cmd return 00988513
[ 40.311184] asic cmd return 00988513
[ 40.314930] asic cmd return 00988513
[ 40.318668] asic cmd return 00988513
[ 40.322408] asic cmd return 00988513
[ 40.326223] asic cmd return 00988513
[ 40.329970] asic cmd return 00988513
[ 40.333713] asic cmd return 00988513
[ 40.337452] asic cmd return 00988513
[ 40.341196] asic cmd return 00988513
[ 40.345006] asic cmd return 00988513
[ 40.348746] asic cmd return 00988513
[ 40.352484] asic cmd return 00988513
[ 40.356230] asic cmd return 00988513
[ 40.359965] asic cmd return 00988513
[ 40.363777] asic cmd return 00988513
[ 40.367516] asic cmd return 00988513
[ 40.371252] asic cmd return 00988513
[ 40.374994] asic cmd return 00988513
[ 40.378741] asic cmd return 00988513
[ 40.382544] asic cmd return 00988513
[ 40.386295] asic cmd return 00988513
[ 40.390037] asic cmd return 00988513
[ 40.393782] asic cmd return 00988513
[ 40.397520] asic cmd return 00988513
[ 40.401335] asic cmd return 00988513
[ 40.405078] asic cmd return 00988513
[ 40.408818] asic cmd return 00988513
[ 40.412553] asic cmd return 00988513
[ 40.416297] asic cmd return 00988513
[ 40.420170] asic cmd return 00988513
[ 40.423920] asic cmd return 00988513
[ 40.427664] asic cmd return 00988513
[ 40.431408] asic cmd return 00988513
[ 40.435151] asic cmd return 00988513
[ 40.438961] asic cmd return 00988513
[ 40.442706] asic cmd return 00988513
[ 40.446450] asic cmd return 00988513
[ 40.450185] asic cmd return 00988513
[ 40.453924] asic cmd return 00988513
[ 40.457733] asic cmd return 00988513
[ 40.461475] asic cmd return 00988513
[ 40.465210] asic cmd return 00988513
[ 40.468947] asic cmd return 00988513
[ 40.472686] asic cmd return 00988513
[ 40.476490] asic cmd return 00988513
[ 40.480237] asic cmd return 00988513
[ 40.483979] asic cmd return 00988513
[ 40.487721] asic cmd return 00988513
[ 40.491536] chain0 total asic:54
[ 40.494921] pos0--addr:00
[ 40.497666] pos1--addr:00
[ 40.500416] pos2--addr:00
[ 40.503160] pos3--addr:00
[ 40.505903] pos4--addr:00
[ 40.508639] pos5--addr:00
[ 40.511389] pos6--addr:00
[ 40.514128] pos7--addr:00
[ 40.516872] pos8--addr:00
[ 40.519610] pos9--addr:00
[ 40.522361] pos10--addr:00
[ 40.525206] pos11--addr:00
[ 40.528038] pos12--addr:00
[ 40.530874] pos13--addr:00
[ 40.533710] pos14--addr:00
[ 40.536544] pos15--addr:00
[ 40.539379] pos16--addr:00
[ 40.542212] pos17--addr:00
[ 40.545045] pos18--addr:00
[ 40.547879] pos19--addr:00
[ 40.550716] pos20--addr:00
[ 40.553550] pos21--addr:00
[ 40.556391] pos22--addr:00
[ 40.559226] pos23--addr:00
[ 40.562059] pos24--addr:00
[ 40.564896] pos25--addr:00
[ 40.567735] pos26--addr:00
[ 40.570570] pos27--addr:00
[ 40.573409] pos28--addr:00
[ 40.576246] pos29--addr:00
[ 40.579081] pos30--addr:00
[ 40.581919] pos31--addr:00
[ 40.584752] pos32--addr:00
[ 40.587587] pos33--addr:00
[ 40.590428] pos34--addr:00
[ 40.593260] pos35--addr:00
[ 40.596094] pos36--addr:00
[ 40.598926] pos37--addr:00
[ 40.601764] pos38--addr:00
[ 40.604601] pos39--addr:00
[ 40.607438] pos40--addr:00
[ 40.610270] pos41--addr:00
[ 40.613107] pos42--addr:00
[ 40.615939] pos43--addr:00
[ 40.618771] pos44--addr:00
[ 40.621604] pos45--addr:00
[ 40.624437] pos46--addr:00
[ 40.627353] pos47--addr:00
[ 40.630196] pos48--addr:00
[ 40.633030] pos49--addr:00
[ 40.635861] pos50--addr:00
[ 40.638696] pos51--addr:00
[ 40.641557] pos52--addr:00
[ 40.644391] pos53--addr:00
[ 40.647226] chain0_asic_exist{0xffffffff}
[ 40.651423] get chain2 reg0x0
[ 40.654530] send BC data:
[ 40.654530] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11
[ 40.761309] asic cmd return 00988513
[ 40.765066] asic cmd return 00988513
[ 40.768804] asic cmd return 00988513
[ 40.772544] asic cmd return 00988513
[ 40.776285] asic cmd return 00988513
[ 40.780085] asic cmd return 00988513
[ 40.783829] asic cmd return 00988513
[ 40.787573] asic cmd return 00988513
[ 40.791312] asic cmd return 00988513
[ 40.795052] asic cmd return 00988513
[ 40.798853] asic cmd return 00988513
[ 40.802602] asic cmd return 00988513
[ 40.806343] asic cmd return 00988513
[ 40.810079] asic cmd return 00988513
[ 40.813821] asic cmd return 00988513
[ 40.817620] asic cmd return 00988513
[ 40.821364] asic cmd return 00988513
[ 40.825103] asic cmd return 00988513
[ 40.828840] asic cmd return 00988513
[ 40.832581] asic cmd return 00988513
[ 40.836385] asic cmd return 00988513
[ 40.840128] asic cmd return 00988513
[ 40.843874] asic cmd return 00988513
[ 40.847615] asic cmd return 00988513
[ 40.851357] asic cmd return 00988513
[ 40.855164] asic cmd return 00988513
[ 40.858914] asic cmd return 00988513
[ 40.862656] asic cmd return 00988513
[ 40.866394] asic cmd return 00988513
[ 40.870140] asic cmd return 00988513
[ 40.873954] asic cmd return 00988513
[ 40.877696] asic cmd return 00988513
[ 40.881435] asic cmd return 00988513
[ 40.885174] asic cmd return 00988513
[ 40.888919] asic cmd return 00988513
[ 40.892728] asic cmd return 00988513
[ 40.896470] asic cmd return 00988513
[ 40.900208] asic cmd return 00988513
[ 40.903957] asic cmd return 00988513
[ 40.907694] asic cmd return 00988513
[ 40.911819] asic cmd return 00988513
[ 40.915563] asic cmd return 00988513
[ 40.919305] asic cmd return 00988513
[ 40.923041] asic cmd return 00988513
[ 40.926783] asic cmd return 00988513
[ 40.930736] asic cmd return 00988513
[ 40.934476] asic cmd return 00988513
[ 40.938213] asic cmd return 00988513
[ 40.941956] asic cmd return 00988513
[ 40.945695] asic cmd return 00988513
[ 40.949506] asic cmd return 00988513
[ 40.953251] asic cmd return 00988513
[ 40.956992] asic cmd return 00988513
[ 40.960731] asic cmd return 00988513
[ 40.964536] chain2 total asic:54
[ 40.967924] pos0--addr:00
[ 40.970680] pos1--addr:00
[ 40.973429] pos2--addr:00
[ 40.976173] pos3--addr:00
[ 40.978917] pos4--addr:00
[ 40.981664] pos5--addr:00
[ 40.984403] pos6--addr:00
[ 40.987142] pos7--addr:00
[ 40.989884] pos8--addr:00
[ 40.992620] pos9--addr:00
[ 40.995361] pos10--addr:00
[ 40.998190] pos11--addr:00
[ 41.001036] pos12--addr:00
[ 41.003883] pos13--addr:00
[ 41.006725] pos14--addr:00
[ 41.009558] pos15--addr:00
[ 41.012394] pos16--addr:00
[ 41.015222] pos17--addr:00
[ 41.018056] pos18--addr:00
[ 41.020893] pos19--addr:00
[ 41.023726] pos20--addr:00
[ 41.026554] pos21--addr:00
[ 41.029393] pos22--addr:00
[ 41.032230] pos23--addr:00
[ 41.035064] pos24--addr:00
[ 41.037899] pos25--addr:00
[ 41.040741] pos26--addr:00
[ 41.043575] pos27--addr:00
[ 41.046404] pos28--addr:00
[ 41.049236] pos29--addr:00
[ 41.052073] pos30--addr:00
[ 41.054907] pos31--addr:00
[ 41.057742] pos32--addr:00
[ 41.060575] pos33--addr:00
[ 41.063409] pos34--addr:00
[ 41.066247] pos35--addr:00
[ 41.069082] pos36--addr:00
[ 41.071921] pos37--addr:00
[ 41.074754] pos38--addr:00
[ 41.077583] pos39--addr:00
[ 41.080419] pos40--addr:00
[ 41.083251] pos41--addr:00
[ 41.086094] pos42--addr:00
[ 41.088925] pos43--addr:00
[ 41.091755] pos44--addr:00
[ 41.094585] pos45--addr:00
[ 41.097419] pos46--addr:00
[ 41.100258] pos47--addr:00
[ 41.103091] pos48--addr:00
[ 41.105925] pos49--addr:00
[ 41.108760] pos50--addr:00
[ 41.111601] pos51--addr:00
[ 41.114434] pos52--addr:00
[ 41.117268] pos53--addr:00
[ 41.120101] chain2_asic_exist{0xffffffff}
[ 41.124293] get chain5 reg0x0
[ 41.127402] send BC data:
[ 41.127402] 0x0000: 0x03 0x05 0x00 0x1a 0x84 0x00 0x00 0x11
[ 41.235907] asic cmd return 00988513
[ 41.239663] asic cmd return 00988513
[ 41.243405] asic cmd return 00988513
[ 41.247150] asic cmd return 00988513
[ 41.250890] asic cmd return 00988513
[ 41.254689] asic cmd return 00988513
[ 41.258434] asic cmd return 00988513
[ 41.262180] asic cmd return 00988513
[ 41.265913] asic cmd return 00988513
[ 41.269652] asic cmd return 00988513
[ 41.273454] asic cmd return 00988513
[ 41.277197] asic cmd return 00988513
[ 41.280942] asic cmd return 00988513
[ 41.284687] asic cmd return 00988513
[ 41.288426] asic cmd return 00988513
[ 41.292224] asic cmd return 00988513
[ 41.295964] asic cmd return 00988513
[ 41.299709] asic cmd return 00988513
[ 41.303455] asic cmd return 00988513
[ 41.307202] asic cmd return 00988513
[ 41.311000] asic cmd return 00988513
[ 41.314742] asic cmd return 00988513
[ 41.318485] asic cmd return 00988513
[ 41.322229] asic cmd return 00988513
[ 41.325972] asic cmd return 00988513
[ 41.329766] asic cmd return 00988513
[ 41.333506] asic cmd return 00988513
[ 41.337248] asic cmd return 00988513
[ 41.340983] asic cmd return 00988513
[ 41.344722] asic cmd return 00988513
[ 41.348527] asic cmd return 00988513
[ 41.352273] asic cmd return 00988513
[ 41.356017] asic cmd return 00988513
[ 41.359761] asic cmd return 00988513
[ 41.363501] asic cmd return 00988513
[ 41.367313] asic cmd return 00988513
[ 41.371054] asic cmd return 00988513
[ 41.374792] asic cmd return 00988513
[ 41.378536] asic cmd return 00988513
[ 41.382274] asic cmd return 00988513
[ 41.386084] asic cmd return 00988513
[ 41.389826] asic cmd return 00988513
[ 41.393572] asic cmd return 00988513
[ 41.397377] asic cmd return 00988513
[ 41.401121] asic cmd return 00988513
[ 41.404937] asic cmd return 00988513
[ 41.408676] asic cmd return 00988513
[ 41.412418] asic cmd return 00988513
[ 41.416160] asic cmd return 00988513
[ 41.419900] asic cmd return 00988513
[ 41.423713] asic cmd return 00988513
[ 41.427458] asic cmd return 00988513
[ 41.431204] asic cmd return 00988513
[ 41.434948] asic cmd return 00988513
[ 41.438764] chain5 total asic:54
[ 41.442144] pos0--addr:00
[ 41.444891] pos1--addr:00
[ 41.447638] pos2--addr:00
[ 41.450380] pos3--addr:00
[ 41.453129] pos4--addr:00
[ 41.455872] pos5--addr:00
[ 41.458613] pos6--addr:00
[ 41.461359] pos7--addr:00
[ 41.464106] pos8--addr:00
[ 41.466851] pos9--addr:00
[ 41.469596] pos10--addr:00
[ 41.472432] pos11--addr:00
[ 41.475270] pos12--addr:00
[ 41.478105] pos13--addr:00
[ 41.480939] pos14--addr:00
[ 41.483774] pos15--addr:00
[ 41.486611] pos16--addr:00
[ 41.489445] pos17--addr:00
[ 41.492276] pos18--addr:00
[ 41.495110] pos19--addr:00
[ 41.497945] pos20--addr:00
[ 41.500778] pos21--addr:00
[ 41.503615] pos22--addr:00
[ 41.506443] pos23--addr:00
[ 41.509278] pos24--addr:00
[ 41.512115] pos25--addr:00
[ 41.514947] pos26--addr:00
[ 41.517780] pos27--addr:00
[ 41.520616] pos28--addr:00
[ 41.523444] pos29--addr:00
[ 41.526281] pos30--addr:00
[ 41.529123] pos31--addr:00
[ 41.531957] pos32--addr:00
[ 41.534788] pos33--addr:00
[ 41.537631] pos34--addr:00
[ 41.540466] pos35--addr:00
[ 41.543297] pos36--addr:00
[ 41.546126] pos37--addr:00
[ 41.548958] pos38--addr:00
[ 41.551787] pos39--addr:00
[ 41.554623] pos40--addr:00
[ 41.557457] pos41--addr:00
[ 41.560291] pos42--addr:00
[ 41.563128] pos43--addr:00
[ 41.565963] pos44--addr:00
[ 41.568797] pos45--addr:00
[ 41.571633] pos46--addr:00
[ 41.574465] pos47--addr:00
[ 41.577296] pos48--addr:00
[ 41.580130] pos49--addr:00
[ 41.582965] pos50--addr:00
[ 41.585795] pos51--addr:00
[ 41.588627] pos52--addr:00
[ 41.591458] pos53--addr:00
[ 41.594290] chain5_asic_exist{0xffffffff}
[ 41.598485] total chain_num{3}
[ 41.601683] chain0 chain_map 0
[ 41.604878] chain0 asic_num--64 actual--54
[ 41.609151] chain0 sw addr interval 4
[ 41.612982] chain1 chain_map 2
[ 41.616180] chain1 asic_num--64 actual--54
[ 41.620464] chain1 sw addr interval 4
[ 41.624285] chain2 chain_map 5
[ 41.627477] chain2 asic_num--64 actual--54
[ 41.631762] chain2 sw addr interval 4
[ 41.635590] clear FPGA nonce buffer
[ 41.944729] btm_tx_conf
[ 41.947355] Set asic frequency {575}
[ 41.951101] Set chip_addr{0x0}reg_address{0x4}value{0x8207}
[ 41.956921] pll reg_data 0x8207
[ 41.960213] timeout {0x1b7f}
[ 41.963232] rev timeout {0x7f1b0080}
[ 41.967172] set freq = 575
[ 41.970025] Freq 575, PLL1 0005c040, PLL2 0220
[ 41.974673] PLL1 0x5c040, PLL2 0x220
[ 41.978414] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x5}cmd_buf[2]{0xc0}cmd_buf[3]{0x47}