ccgllc
Copper Member
Full Member
Offline
Activity: 658
Merit: 101
Math doesn't care what you believe.
|
|
February 13, 2018, 10:53:06 PM |
|
Also... your going to need 3 separate circuits to run those off of, presuming you have them plugged in 15Amp ones. At 1200W/120V each will be pulling 10amps, well under the 12amps a 15amp circuit can handle continuously, but no way to combine (3) power supplies onto (2) 15amp circuits and not pop a breaker.
Hmmm, each miner is going to pull something like 1422 watts, so roughly 475 watts per hash card (not accurate since I split the controller power across all three cards, but close enough). So your at 950W/120V or 7.9 amps per power supply. So no... still can't run two on a 15 amp circuit, although your right on the edge for running two on a dedicated 20 amp circuit (rather depends on how efficient your power supplies are, and if your getting 115V, 120V, or more at your socket).
|