bigbeninlondon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 12:07:19 AM |
|
Can these mine in conjunction with Block Erupters? Yes, I've been doing just that. It appears that bfgminer doesn't auto-detect my block erupters, and cgminer doesn't detect the nanofuries, so I have to have both processes running ATM. I tried adding --scan-serial erupter:all to my bfgminer parameters, to no avail. Are there additional steps I have to take? Many block erupters were sold without autodetection support*. If you are using cgminer with them, then you/cgminer (Windows/Linux) have replaced the correct SiLabs/cp210x driver with WinUSB/usbfs. You will need to undo this to use it with any software that uses the standard interfaces, including BFGMiner. * cgminer will automatically probe any cp210x devices to check if they are erupters; BFGMiner only does this with -S erupter:all unless they identify themselves as Erupters up-front. Thanks for the help. That worked like a charm. I'm now 100% bfgminer.
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 02:16:26 AM |
|
If someone that has them working can try them in a USB 2.0 hub that would be awesome.
i have them working in the hub with all the asicminer usbs and the BF1 pictured below. pic is from when i first unwrapped them ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FoBnnFmJ.jpg&t=665&c=4Sc91HupQJne1w) Hub is a Dlink DUB-H7 powered usb2.0 hub i can get them going at 56 bits in the charging ports but they don't have enough cooling to be stable so 54 bits for now screen of 11 hrs of them running on that hub ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMxNnyu2.png%3F1&t=665&c=ZyhII6A4J4m8Fw)
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 02:59:15 AM |
|
I'm impressed. You have all the types of USBs working in one miner and on one hub?
|
|
|
|
bigbeninlondon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 03:02:21 AM |
|
I'm impressed. You have all the types of USBs working in one miner and on one hub?
I have two four port hubs, but yea.
|
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 03:25:55 AM |
|
If someone that has them working can try them in a USB 2.0 hub that would be awesome.
i have them working in the hub with all the asicminer usbs and the BF1 pictured below. pic is from when i first unwrapped them ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FoBnnFmJ.jpg&t=665&c=4Sc91HupQJne1w) Hub is a Dlink DUB-H7 powered usb2.0 hub i can get them going at 56 bits in the charging ports but they don't have enough cooling to be stable so 54 bits for now screen of 11 hrs of them running on that hub ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMxNnyu2.png%3F1&t=665&c=ZyhII6A4J4m8Fw) Can't see the image at work. So works on your Dlink, What about your Pi? Again, sorry if it shows in the pic.
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 04:17:02 AM |
|
If someone that has them working can try them in a USB 2.0 hub that would be awesome.
i have them working in the hub with all the asicminer usbs and the BF1 pictured below. pic is from when i first unwrapped them snip Hub is a Dlink DUB-H7 powered usb2.0 hub i can get them going at 56 bits in the charging ports but they don't have enough cooling to be stable so 54 bits for now screen of 11 hrs of them running on that hub snip Can't see the image at work. So works on your Dlink, What about your Pi? Again, sorry if it shows in the pic. not currently running on a pi. having lockup issues (investigating...) running on windows but should run just fine on a normal linux box the dlink is running 2 NFY and all my other hardware is on a cheap 7 port hub from MCM electronics (i live just down the street from their warehouse) in all 5 BES, 1 BPM, 2 NFY totaling ~8-9 ghs depending on the timeframe goin to try few different linux distros to see fi the lockups are raspian specific
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 04:19:11 AM |
|
I'm impressed. You have all the types of USBs working in one miner and on one hub?
2 hubs the top screen was before i set up the second
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 04:25:35 AM |
|
I'm impressed. You have all the types of USBs working in one miner and on one hub?
2 hubs the top screen was before i set up the second command used bfgminer -c windows.conf -D -S BPM:\\.\COM8 -S BES:\\.\COM9 -S BES:\\.\COM10 -S BES:\\.\COM11 -S BES:\\.\COM12 -S BES:\\.\COM13 though i could condense it into my config file as: "scan-serial": [ "BPM:\\.\COM8", "BES:\\.\COM9", "BES:\\.\COM10", "BES:\\.\COM11", "BES:\\.\COM12", "BES:\\.\COM13" ] and unfortunately ill probably never have a klondike k1 to add to the collection :,< silent tear
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 04:57:34 AM |
|
Can't see the image at work.
So works on your Dlink, What about your Pi?
Again, sorry if it shows in the pic.
not currently running on a pi. having lockup issues (investigating...) How is Pi powered? maybe lockup is power feed back from powered hub? As far as running nanos on Pi, I wonder if it has something to do with the Broadcom BCM2835 chip used. My hubs are powered but no go on nanos
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 05:06:16 AM |
|
Can't see the image at work.
So works on your Dlink, What about your Pi?
Again, sorry if it shows in the pic.
not currently running on a pi. having lockup issues (investigating...) How is Pi powered? maybe lockup is power feed back from powered hub? As far as running nanos on Pi, I wonder if it has something to do with the Broadcom BCM2835 chip used. My hubs are powered but no go on nanos its not a lockup of the whole device. i can ctrl-c bfgminer to death just fine. its just bfgminer seems to hang/not produce anymore debug output after a seemingly random number of MCP2210 transfers temporarily rejected.... anyway ttyal must rest pi was powered through power micro usb and probably some back feed from hubs
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 08:54:32 PM |
|
Would love to hear from some additional linux users.
We know they work:
On windows with USB2 and USB3 hubs. On "normal" linux box with USB3 hubs.
We know it doesn't appear to work w/ Pi and USB2 hubs.
|
|
|
|
erk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 09:18:02 PM |
|
Would love to hear from some additional linux users.
We know they work:
On windows with USB2 and USB3 hubs. On "normal" linux box with USB3 hubs.
We know it doesn't appear to work w/ Pi and USB2 hubs.
A Pi is a normal Linux box it's just not Intel based. You obviously have to make the effort to compile the correct version of bfgminer to support the NF1 the hub is irrelevant is it's not part of the Pi.
|
|
|
|
Luke-Jr
Legendary
Offline
Activity: 2576
Merit: 1186
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 09:22:55 PM |
|
Would love to hear from some additional linux users.
We know they work:
On windows with USB2 and USB3 hubs. On "normal" linux box with USB3 hubs.
We know it doesn't appear to work w/ Pi and USB2 hubs.
A Pi is a normal Linux box it's just not Intel based. You obviously have to make the effort to compile the correct version of bfgminer to support the NF1 the hub is irrelevant is it's not part of the Pi. Not quite. Pi has various USB-related hardware issues.
|
|
|
|
erk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 09:32:30 PM |
|
Would love to hear from some additional linux users.
We know they work:
On windows with USB2 and USB3 hubs. On "normal" linux box with USB3 hubs.
We know it doesn't appear to work w/ Pi and USB2 hubs.
A Pi is a normal Linux box it's just not Intel based. You obviously have to make the effort to compile the correct version of bfgminer to support the NF1 the hub is irrelevant is it's not part of the Pi. Not quite. Pi has various USB-related hardware issues. Wouldn't they be the same for all USB miners on the Pi then?
|
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2013, 09:40:25 PM |
|
Wouldn't they be the same for all USB miners on the Pi then?
Proof is in testing and what I posted is what we know so far. I was also an Admin not a programmer but maybe commands are used that the Broadcom BCM2835 used in the Pi as USB host doesn't understand?
|
|
|
|
vs3 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2013, 01:54:19 AM |
|
I wonder if they're not getting enough power?
Still unclear.... I have rosewill's and dlink hubs I inserted one into hub: [2013-11-10 00:56:43] Pushing work from pool 1 to hash queue [2013-11-10 00:56:43] mcp2210_get_gpio_input: Failed to get current GPIO input values [2013-11-10 00:56:43] NFY 0: checkport failed [2013-11-10 00:56:43] NFY 0 failure, exiting
Still not sure of power... is there a light on these things? I alternated between all 10 units and plugged them in with no lights on the nano fury's The clue for me in the log above is the "checkport failed" message. The program does "checkport" while it first tests all devices and later at regular intervals when it sends work to the device. The fact that it passed the first "checkport" means that there was good communication with the device at that time and everything worked as expected. The line immediately preceding the "checkport failed" message says "mcp2210_get_gpio_input: Failed to get current GPIO input values" which indicates that the device is no longer plugged into the USB hub. Or in other words - the host can no longer communicate with the device. As for why did the communication get disrupted - there are many possible answers. My guess is that the USB host (or hub) did not provide enough power to the device and either the hub got entirely dropped or just the device got dropped. You can test whether that is the case by plugging the device directly into your PC - all motherboards will provide sufficient power. Note however that Raspberry Pi ports are not USB2.0 compliant - they barely provide enough power for a mouse and a keyboard - so plugging it directly into RPi's USB port may or may not work. It seems that wherever you had plugged the device was good enough for the initial communication, and had it not been for the power issues everything else worked.
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2013, 11:34:28 PM |
|
@vs3 can you elaborate on the req's to pencil mod the NFY similar to the BF1? if the voltage setup circuits are anything similar: on BF1 rub graphite pencil across R15 until resistance measured across R15 and R16 is ~0.89Kohm ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Fq1DQFJw.jpg&t=665&c=-HES8G1prNwtew)
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
vs3 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2013, 11:39:42 PM |
|
@vs3
can you elaborate on the req's to pencil mod the NFY similar to the BF1?
if the voltage setup circuits are anything similar: on BF1
rub graphite pencil across R15 until resistance measured across R15 and R16 is ~0.89Kohm
Yes - the procedure is almost identical - I'll repost what I wrote about that (on Marto74's thread) - let me know if that covers it or I missed anything: Can you give me instructions for pencil mod?
See this image: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Fq1DQFJwl.jpg&t=665&c=WH3xeBH_T1kLEg) R2 and R3 determine the voltage: V = 0.8*(R2+R3)/R3 (and factory settings are R2=100 and R3=2.4k for about 0.833V) If you want to increase the voltage you can either increase R2 or decrease R3 (pencil mod decreases resistance). And to lower the voltage - you can lower R2 or increase R3. My 2 cents - start by first lowering the voltage. At least that's the safer option ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
erk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2013, 12:32:14 AM |
|
Does the NF1 worth with cgminer as well or only bfgminer?
|
|
|
|
vs3 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2013, 01:12:01 AM |
|
Does the NF1 worth with cgminer as well or only bfgminer?
We started working on a cgminer port but it turned out bfgminer somehow gets 10-15% more GH/s, so we've sort of given up on fiddling with cgminer (at least for now). I can send you what we have if you want - I've gotten it to work on Windows only though. If there are any volunteers that know their way around Linux and can take care of that part - just let me know and I'd be glad to assist. For a proper port into cgminer it will have to be done by Con Kolivas - but at the moment it is unclear when and if at all that's going to happen. In my last email exchange with him he said "I'm overwhelmed with other code tasks at the time (mostly paid which means things like your code gets low priority I'm afraid)." And since Luke did such an awesome job with bfgminer I haven't had to bother Con again.
|
|
|
|
|