ASICMiner Block Erupter Blade Configuration Page Issue.

[caminilegroup]

I'm all out, hopefully someone can chime in with something.

Have you tried it on a different pool to see if it does the same thing?

[Bitarchist]

I'm all out, hopefully someone can chime in with something.

Have you tried it on a different pool to see if it does the same thing?

Thanks for your help! =)

Im trying different pools right now...

Ill post back here when i figure it out...

Thanks again,

Nate

[caminilegroup]

What power supply are you using?

[defcon23]

hello , i'm offering a  remote support to help configure your blade s

[caminilegroup]

You have to remember that these blades can take up to 10A. Using one wire to supply that much amperage is asking for trouble. To get a sense of it, hold the black wire and feel how hot it is getting. 

[trevorh]

I'm using a Corsair 500 watt power supply I happened to have laying around. I simply cut one of the connectors off and directly connected the black and yellow wires (1 each). It's working great, and the wires aren't even warm. I then connected a case fan that I also happened to have lying around to the other 2 terminals. Here is a picture:
http://i1027.photobucket.com/albums/y332/atari_guy/foto_no_exif_zps8905d114.jpg

[mrpark]

Very odd, maybe it's just my power supply. I will try another. I am having the same issue as the other user had.

[mrpark]

The power supply I have is a coolmax 400 10amp. Maybe it's not enough power.

[caminilegroup]

The power supply I have is a coolmax 400 10amp. Maybe it's not enough power.

If this is your power supply then it can power one blade.

http://images10.newegg.com/productimage/17-159-043-25.jpg

Use the pci-e connector and chop the end off, and use it.

[caminilegroup]

Ok here we go.

http://images.highspeedbackbone.net/SkuImages/gallery/large/T13-2009-K.jpg

Looks like 15A on 12+ rail, with a 10% efficiency that leaves you with ~13.5A. It should handle it, efficiency isn't all that great.

Use the molex wires, can you take a screenshot of your config page just to rule that out. Make sure to white out whatever you don't want the public to see.

[caminilegroup]

Yeah you can't upload pics, you have to host them somewhere and link them.

Try the power supply and see if that helps.

[caminilegroup]

No problem, post your results.

I work from home so I'm always on here.

[caminilegroup]

I take it you're on slush's pool. Have you tried a different pool just to rule out that?

[mrpark]

Yes, I am using slush's pool. I am not exactly sure how to change pools. I assume I have to mess with config files?

[caminilegroup]

look at post #10 in this thread.

If you don't want to mess with your config on the blades just use the -cu and -cp argument on mining_proxy

[mrpark]

I can mess with the config page if needed, I am really new to putting in the scripts so I will look for a walk through somewhere. I am a newbie when it comes to the coding of this thing. heh.

I will try to change my config to stratum.btcguild.com:3333

[caminilegroup]

Just remember the blade won't do stratum that's why you have to use a proxy, either slush or bfgminer.

for btcguild it would look like mining_proxy.exe -o stratum.btcguild.com -cu (your username.worker) -cp (anything)

leave the config alone on the blades and the proxy will take care of everything.

Are you using windows mac or linux for the proxy, I noticed ie for your screenshot so I'm guessing windows.

[caminilegroup]

oops, -cu (username_worker)

[caminilegroup]

I run an ubuntu 13.10 server in vmware for my proxy setup. I have a couple bash scripts for different pools

Using the -cu and -cp I don't have to worry with the blades, I just ssh into the server and change the pool with the script and the blades are already connecting to the ip address in it's config.

https://lh3.googleusercontent.com/-zHM4olW_joo/UqCLKbRlpAI/AAAAAAAAQUc/d2EF5iWbQdM/s0/Screen%2520Shot%25202013-12-05%2520at%25208.16.20%2520AM.png

[mrpark]

Pool is not it, I changed the pool and same result. I hope we can hear back from the other guy having this problem. I paid $365 for this board on Amazon from Jones. Thinking about returning it and just concentrate on litecoins.