https://docs.google.com/file/d/0Bw1XF4HYW9I6QXFCd1F1cWRqU1E/edit?usp=sharinghttps://docs.google.com/file/d/0Bw1XF4HYW9I6Qjg1YWM3Zjd0TUk/edit?usp=sharingUpdate* After about 15 minutes all the Erupters LEDs went solid and not response from LCD input
Played around with moving fan position, got it read upto 13, but hash rate was still only 3.2-3.3 rate ( 10x Erupters). It then crapped out after a little over a minute.
The following is my USB tree:
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/3p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 4 80M
|__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=rtl8192cu, 480M
|__ Port 3: Dev 5, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 6, If 0, Class=Vendor Specific Class, Driver=usbfs, 12M
|__ Port 2: Dev 7, If 0, Class=Vendor Specific Class, Driver=usbfs, 12M
|__ Port 3: Dev 8, If 0, Class=Vendor Specific Class, Driver=usbfs, 12M
|__ Port 4: Dev 9, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 10, If 0, Class=Vendor Specific Class, Driver=us bfs, 12M
|__ Port 2: Dev 11, If 0, Class=Vendor Specific Class, Driver=us bfs, 12M
|__ Port 3: Dev 12, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 14, If 0, Class=Vendor Specific Class, Drive r=usbfs, 12M
|__ Port 3: Dev 15, If 0, Class=Vendor Specific Class, Drive r=usbfs, 12M
|__ Port 4: Dev 13, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 17, If 0, Class=Vendor Specific Class, Drive r=usbfs, 12M
|__ Port 2: Dev 18, If 0, Class=Vendor Specific Class, Drive r=usbfs, 12M
|__ Port 3: Dev 19, If 0, Class=Vendor Specific Class, Drive r=usbfs, 12M
|__ Port 4: Dev 20, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 22, If 0, Class=Vendor Specific Class, D river=cp210x, 12M