Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora)

[funakoshi]

In a few days from now I am going
to publish release v1.0 of Funakoshi-Miner.

It will include a performance boost 

[1715294185]

1715294185

[Johnjay06]

What's the fee?

[funakoshi]

What's the fee?

1.5

[funakoshi]

Version 1.0 of the miner has been released.
Made some gpu-side performance improvments  

    https://github.com/funakoshi2718/funakoshi-miner

[Johnjay06]

Hopefully we'll get some test results soon from the update

[almartins]

At my 3 x GTX 1080 less 12% Hash and 7% more power consumption at lower TDU.

[funakoshi]

At my 3 x GTX 1080 less 12% Hash and 7% more power consumption at lower TDU.

Please check on the pool side and see.

The sol/s in the EquiHash algorithm change all the time in
the range of 30% to each direction. I am still experimenting
in calculating more or less stable avarage.

What is important to you is what your pool says.
The pool estimates an avarage based on submits.
From hundreds of sol/s each second, there is 1 submit
each 1 to 60 seconds (depending on the difficulty target
of the pool). Thus the pool estimate is also unstable.

You should run the miner a full day to decide what the
pool says.

[hopfi2k]

Version 1.0 of the miner has been released.
Made some gpu-side performance improvments  

    https://github.com/funakoshi2718/funakoshi-miner

Time to get our hands dirty again ;-)

Fantastic job, Funakoshi!

Cheers,
Andy

[giveen1]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

[funakoshi]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

I didn't test the miner on 1060 3GB.
It seams that the miner requires more memory than available on the gpu
card. To support 1060 3GB some changes need to be done in the code.

[giveen1]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

I didn't test the miner on 1060 3GB.
It seams that the miner requires more memory than available on the gpu
card. To support 1060 3GB some changes need to be done in the code.

All other equihash software support it, its no biggy if you dont put it in.

[Keko Fdez]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

I didn't test the miner on 1060 3GB.
It seams that the miner requires more memory than available on the gpu
card. To support 1060 3GB some changes need to be done in the code.

Hi guys, I am new here.

I have exactly the same problem: CUDA: failed to alloc memory
Running a 6 GTX 1070 Ti rig on Windows 10.

Any ideas on how to solve it?

[funakoshi]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

I didn't test the miner on 1060 3GB.
It seams that the miner requires more memory than available on the gpu
card. To support 1060 3GB some changes need to be done in the code.

Hi guys, I am new here.

I have exactly the same problem: CUDA: failed to alloc memory
Running a 6 GTX 1070 Ti rig on Windows 10.

Any ideas on how to solve it?

What is the command you used for running the miner?

[giveen1]

Code:

funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

that is the command I used.

[funakoshi]

Code:

funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

that is the command I used.

Just for testing. Can you try to use only 3 devices -cd 0 1 2
and see if the problem continues.

[Keko Fdez]

Finally decided to give this a try:

[2018-Mar-01 15:25:56] [GPU-3] CUDA: failed to alloc memory

6x 1060 3GB. I have a 16GB pagefile.

Dialed back overclock to stock, same results.


funakoshiMiner.exe -l us-east.equihash-hub.miningpoolhub.com:17023 -u XXXXXXXXXXX -p x -f log.txt -cd 0 1 2 3 4 5

I didn't test the miner on 1060 3GB.
It seams that the miner requires more memory than available on the gpu
card. To support 1060 3GB some changes need to be done in the code.

Hi guys, I am new here.

I have exactly the same problem: CUDA: failed to alloc memory
Running a 6 GTX 1070 Ti rig on Windows 10.

Any ideas on how to solve it?

What is the command you used for running the miner?

this is the one I used:

funakoshiMiner.exe -cd 0 1 2 3 4 -l eu1-zcash.flypool.org:3443 -u address.minername

I took it as it was from the web and just changed my wallet address and miner name.

[bigdownloads]

Hello Funakoshi,

Are you maybe interested in this project? I am willing to offer you 30% of all earnings mined. This could be a very profitable project where we can earn upto 4-7k USD a day. Please let me know if you are interested.

https://i.gyazo.com/3d76d1ec0710dc4ee8adf8a63608a94d.png

[UniversusTech]

@Funakoshi

I just noticed that on Github, the is a spelling mistake on the title of the miner!
"Funakoshi Eqhihash Cuda miner"

Unless it is on purpose?!
If it's the case, I'm curious what's the meaning!

Thanks for this new miner!   I'm installing it right now; it seems very promising 

[funakoshi]

@Funakoshi

I just noticed that on Github, the is a spelling mistake on the title of the miner!
"Funakoshi Eqhihash Cuda miner"

Unless it is on purpose?!
If it's the case, I'm curious what's the meaning!

Thanks for this new miner!   I'm installing it right now; it seems very promising 

Thanks a lot. It was a typo mistake. I fixed it.

[annapotpot]

Why SSL only? Are you hiding the network traffic of your miner?