funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 13, 2018, 06:56:28 PM |
|
I am proud of my latest creation (worked on it for many months). I have published the zcash, zclassic, ... solver at github.com/funakoshi2718/funakoshi-miner just a few hours ago.
|
|
|
|
giveen1
Newbie
Offline
Activity: 70
Merit: 0
|
|
February 13, 2018, 08:06:19 PM |
|
Why yours compared to any others around here?
|
|
|
|
hopfi2k
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 13, 2018, 09:12:34 PM |
|
Hi, trying with 1070ti on Zcash (flypool), but only getting: [TOTAL (15 sec)] 0 I/s, 0 Sol/s, 0 Accepted, 0 Rejected Some machine is working flawless with DTMS, EWBF etc. Running on Ubuntu... Any ideas? Cheers, Andy Btw. How to exit from the miner? (currently need to kill -9 ...)
|
|
|
|
Bimmber
Newbie
Offline
Activity: 210
Merit: 0
|
|
February 13, 2018, 09:19:59 PM |
|
Anybody knows how to install this miner on eth os ?
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 04:33:49 AM |
|
Hi, trying with 1070ti on Zcash (flypool), but only getting: [TOTAL (15 sec)] 0 I/s, 0 Sol/s, 0 Accepted, 0 Rejected Some machine is working flawless with DTMS, EWBF etc. Running on Ubuntu... Any ideas? Cheers, Andy Btw. How to exit from the miner? (currently need to kill -9 ...) The command-line argument -cd 0 requests to mine using first nvidia card. See the usage example in the github. To mine using 2 cards you should pass the arg -cd 0 1 If you don't pass -cd (cuda device) arg, you will get 0 sols. Soon I will add api support.
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 04:47:12 AM |
|
Why yours compared to any others around here?
funakoshiMiner is virus-free. No trojan. This is very important. It uses SSL (secured). It is fast.
|
|
|
|
ylpkm2
Newbie
Offline
Activity: 39
Merit: 0
|
|
February 14, 2018, 04:56:11 AM |
|
needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 05:44:20 AM |
|
needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.
Let the pool decide which solver is faster. Check what the pool says after a few hours of running. funakoshi should be faster.
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 05:53:56 AM |
|
needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.
Let the pool decide which solver is faster. Check what the pool says after a few hours of running. funakoshi should be faster. Also ignore the first report of counters. It is lower due to handshake with the pool.
|
|
|
|
hopfi2k
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 14, 2018, 02:25:49 PM |
|
Hi, trying with 1070ti on Zcash (flypool), but only getting: [TOTAL (15 sec)] 0 I/s, 0 Sol/s, 0 Accepted, 0 Rejected Some machine is working flawless with DTMS, EWBF etc. Running on Ubuntu... Any ideas? Cheers, Andy Btw. How to exit from the miner? (currently need to kill -9 ...) The command-line argument -cd 0 requests to mine using first nvidia card. See the usage example in the github. To mine using 2 cards you should pass the arg -cd 0 1 If you don't pass -cd (cuda device) arg, you will get 0 sols. Soon I will add api support. Have been running it with the following command: sudo ./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3334 -u xxxxxxx.rig That still produces 0 Sol... Anything else I can do? Cheers, Andy
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 02:52:05 PM Last edit: February 14, 2018, 03:13:59 PM by funakoshi |
|
Hi Andy
I have tested flypool from Ubuntu.
However I used: ./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3443 -u xxxxxxxx.rig0
Please use ssl port 3443
In the log you can see that connecting to wrong port 3334 has failed.
No need to sudo.
Thanks Andy
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
February 14, 2018, 06:03:57 PM |
|
Tested on lowend machine - E2180 4gb ram, 2*1070Ti, Win7, driver 390 makes ~ 700 h/s, vs 960h/s from dstm 0.5.8 Could be due to higher cpu usage, 40-50% vs 20-35% of dstm
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 14, 2018, 06:26:37 PM Last edit: February 14, 2018, 08:02:29 PM by funakoshi |
|
Tested on lowend machine - E2180 4gb ram, 2*1070Ti, Win7, driver 390 makes ~ 700 h/s, vs 960h/s from dstm 0.5.8 Could be due to higher cpu usage, 40-50% vs 20-35% of dstm
The sol/s change all the time. Each 15 secs different counters are logged. Some of them higher and some lower. This is due to the statistical nature of the equihash algo. How did you choose 700 sol/s. Is it the lowest/highest/avarage? Funakoshi miner reports each 15 secs the exact avarage in these 15 secs. The sol/s normaly change each 15 secs (in range of tens per sec per device). Miners should check what the pool says after a few hours of mining. Let the pool decide which miner is faster. Miners get their fee from the pool.
|
|
|
|
hopfi2k
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 15, 2018, 02:41:37 PM |
|
Hi Andy
I have tested flypool from Ubuntu.
However I used: ./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3443 -u xxxxxxxx.rig0
Please use ssl port 3443
In the log you can see that connecting to wrong port 3334 has failed.
No need to sudo.
Thanks Andy
Hi, I'm such a fool - a little typo in the port number and I'm blame your miner not working. Please apologize, that was totally my fault. Miner is running and reporting around 380-412 Sol/s, while DSTM was reporting like 490-495 Sol/s. Let's wait and see in a few hours what Flypool is reporting ;-) Thanks a lot! Cheers, Andy
|
|
|
|
hopfi2k
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 15, 2018, 10:19:55 PM |
|
Hi,
some early reports from my testing concerning mining speed: (linux, 1 x 1070ti):
Funakoshi: Miner: 350-410 Sol/s Flypool: 437 H/s (6+ hours) 0 stale shares, 0 invalid shares CPU use: 90%
DSTM 0.5.7: Miner: 490-495 Sol/s Flypool: 485 H/s 0 stale shares, 0 invalid shares CPU use: 6,5%
Good thing: Funakoshi is running rock solid (as DSTM is) So, even at the pool side I don't see any benefit from use Funakoshi. While I appreciate other miners and competition, I looks (at least from these early results), that it still needs some work ;-) Anyhow, first results are promising, and you may find some ways of squeezing some more Sol/s out of your miner! Maybe you want to consider a 0% dev fee until you reach a performance level that is more closer to the competitors?
Cheers, Andy
|
|
|
|
giveen1
Newbie
Offline
Activity: 70
Merit: 0
|
|
February 15, 2018, 10:30:59 PM |
|
Hi,
some early reports from my testing concerning mining speed: (linux, 1 x 1070ti):
Funakoshi: Miner: 350-410 Sol/s Flypool: 437 H/s (6+ hours) 0 stale shares, 0 invalid shares CPU use: 90%
DSTM 0.5.7: Miner: 490-495 Sol/s Flypool: 485 H/s 0 stale shares, 0 invalid shares CPU use: 6,5%
Good thing: Funakoshi is running rock solid (as DSTM is) So, even at the pool side I don't see any benefit from use Funakoshi. While I appreciate other miners and competition, I looks (at least from these early results), that it still needs some work ;-) Anyhow, first results are promising, and you may find some ways of squeezing some more Sol/s out of your miner! Maybe you want to consider a 0% dev fee until you reach a performance level that is more closer to the competitors?
Cheers, Andy
Thank you.
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 16, 2018, 04:23:14 AM Last edit: February 16, 2018, 06:54:34 AM by funakoshi |
|
Thanks Andy
You are very kind.
I will improve the performance of my solver.
|
|
|
|
hopfi2k
Newbie
Offline
Activity: 48
Merit: 0
|
|
February 16, 2018, 12:07:17 PM |
|
Thanks Andy
You are very kind.
I will improve the performance of my solver.
Funakoshi (if this is your name?), If you find ways to improve it - please go for it! I really think competition between different miners is a good thing. Furthermore I believe that dev fee is something totally acceptable - if the dev fee is worth the performance and stability. The market is big enough and great and reliable miners will always find plenty of rigs to mine on. Finally I wouldn't focus too much on Windows. No serious miner (with more than really small number of rigs) will use Windows, because its hell to maintain and never stable as a Linux system... Cheers, Andy
|
|
|
|
boo50
Sr. Member
Offline
Activity: 472
Merit: 250
lux8.net
|
|
February 16, 2018, 12:43:55 PM |
|
added support to Nibirupool (ssl ports) and .bat examples for easy miners setup.
|
|
|
|
funakoshi (OP)
Newbie
Offline
Activity: 99
Merit: 0
|
|
February 19, 2018, 09:21:35 AM |
|
I have improved the performance of Funakosh-Miner Now the solver doesn't use much CPU. As a side-effect there is a jump in solves-rate both on Windows and on Linux. You are welcome to download the new release and try it.
|
|
|
|
|