Hi Guys.... those who are using GA-H110-D3A please help me!!!
Windows can't detect the GPU through riser. I installed on the PCI-E 16x and it runs normal. But with many risers in many slots (16x & 1x) nothings happens. The monitor is connected to the onboard video.
below are my specs....
Windows 10 Pro 64bits
GA-H110-D3A
G3930
2x 4g Crucial DDR4 2400
SSD 120g Kingston
4x Strix 1080ti
Platimax 1350w Platinum
4x risers full capacitor with 6 pin conector
I did the configuration of Gigabyte website... also did some changes from other users who had problems too...
BIOS F23a (F20~F23 the mining mode doesn't work in some occasion, when enabled and not working, will not log to windows) it's a bug.
Peripherals - Mining Mode: Enabled (don't remember how I solved it)
BIOS - CSM Support: Enabled (Can't disable because will not log to windows)
M.I.T. - Max Link Speed: Auto (tried with Gen1 & Gen2)
Peripherals - Initial display output: IGFX
Peripherals - Above 4g Decoding: Enabled
Chipset - Internal Graphic: Enabled
2 Molex are connected to the board
Any suggestions and help are welcome....
try disconnecting the 2 molex connectors and see if it works. they provide auxillary power for risers that arent powered (old ribbon style)