Name this PDU... PDU help

[VentMine]

https://imgur.com/eejULPG

Hey peeps, can anybody identify what kind of PDUs are used in this farm?

Also, I'm buying 30 AMP pdu's for my farm, link below. I've calculated I can only run 3x antminer S9's on this (230V input power), if I try to run 4 I think i'll trip the internal PDU breaker (set at 24 amps). Am I right? I'd like to get 4 Antminers / PDU if possible, any ideas based on my 230V input?

Link to the PDU's i'm specing: https://www.cyberpowersystems.com/product/pdu/pdu30bhvt8r/

[1715159243]

1715159243

[1715159243]

1715159243

[1715159243]

1715159243

[1715159243]

1715159243

[1715159243]

1715159243

[Raymond_B]

https://imgur.com/eejULPG

Hey peeps, can anybody identify what kind of PDUs are used in this farm?

Also, I'm buying 30 AMP pdu's for my farm, link below. I've calculated I can only run 3x antminer S9's on this (230V input power), if I try to run 4 I think i'll trip the internal PDU breaker (set at 24 amps). Am I right? I'd like to get 4 Antminers / PDU if possible, any ideas based on my 230V input?

Link to the PDU's i'm specing: https://www.cyberpowersystems.com/product/pdu/pdu30bhvt8r/

I don't have an answer to the PDU in the pic. But the PDU you spec'd is 24A total (recommended) and has 2x 16A breakers. So each 4 outlets is on a 16A breaker. You could run 4 off that PDU, **but** safe recommended 24x7 operation is 80% of the circuit. 30A * .80= 24 amps.

Look further down in this forum I posted a PDU thread with some recommendations.

[btc-haze]

https://imgur.com/eejULPG

Hey peeps, can anybody identify what kind of PDUs are used in this farm?

Also, I'm buying 30 AMP pdu's for my farm, link below. I've calculated I can only run 3x antminer S9's on this (230V input power), if I try to run 4 I think i'll trip the internal PDU breaker (set at 24 amps). Am I right? I'd like to get 4 Antminers / PDU if possible, any ideas based on my 230V input?

Link to the PDU's i'm specing: https://www.cyberpowersystems.com/product/pdu/pdu30bhvt8r/

i am able to run 4 on single phase 245V , amps range from 23.5 to 24.5 for 4x S9 14.0T

my other location runs on 3 phase 208V , amp ranges from 20 - 21.5 for 3x S9 13.5T

the 30A breakers do get quite hot.

[VentMine]

Thanks RaymondB for the advice!

The thread he is talking about is here for the lazy:
https://bitcointalk.org/index.php?topic=2835305.new#new