EVGA 1300 SuperNova G2 pinout

[yurtesen]

Hi,

I have this power supply and no mobo modular cable. But I have PCIe cables so I can run miners with it once I get it going. All I see is:
https://www.evga.com/articles/00755/images/univ/1k_Mod_Face_lrg.jpg
Can anybody tell which pins in the photo above should be shorted to get it going?

Thanks,

[shadizzle]

You would have to look at the 24 pin plug via internet, or find who makes the PSU for EVGA in order to figure that out.

The colors you're looking for to execute the run command on the PSU are green(sometime dark green, but smaller gauge wire) and any ground off the 24pin plug.


GL

[ssateneth]

I think this guy was asking this question on bitcoin-otc the other day. If it's anything like my seasonic, the larger connector holds more common lines (12v, 5v, 3.3v, ground), and the smaller one holds the minor lines (5v standby, -12v, -5v PWR_OK, PS_ON#). My best bet is to connect a multimeter's probeto a known ground, and start sticking the other probe in the ATX 24 pin area on the power supply. You don't want to dead short random pins with a paper clip because if you dead short the standby 5v toa  ground, you're power supply will go pop, magic smoke.

[shadizzle]

I think this guy was asking this question on bitcoin-otc the other day. If it's anything like my seasonic, the larger connector holds more common lines (12v, 5v, 3.3v, ground), and the smaller one holds the minor lines (5v standby, -12v, -5v PWR_OK, PS_ON#). My best bet is to connect a multimeter's probeto a known ground, and start sticking the other probe in the ATX 24 pin area on the power supply. You don't want to dead short random pins with a paper clip because if you dead short the standby 5v toa  ground, you're power supply will go pop, magic smoke.

This^

[crazyates]

Pin layout:
http://lmgtfy.com/?q=atx+24+pin+psu+pin+layout&l=1

Or how to manually turn on a PSU:
http://lmgtfy.com/?q=how+to+manually+turn+on+a+psu&l=1

[skleven]

The easy way is to connetct the green and the black wire beside it. A paperclip does the trick.

[1l1l11ll1l]

Hi,

I have this power supply and no mobo modular cable. But I have PCIe cables so I can run miners with it once I get it going. All I see is:
https://www.evga.com/articles/00755/images/univ/1k_Mod_Face_lrg.jpg
Can anybody tell which pins in the photo above should be shorted to get it going?

Thanks,

The bottom of the two under the "M" is the "green" so jump it right next door to the ground.

Source: It's what BFL ships with multiple singles, and that's the pin they jump, using one now.

[yurtesen]

Hi,

I have this power supply and no mobo modular cable. But I have PCIe cables so I can run miners with it once I get it going. All I see is:
https://www.evga.com/articles/00755/images/univ/1k_Mod_Face_lrg.jpg
Can anybody tell which pins in the photo above should be shorted to get it going?

Thanks,

The bottom of the two under the "M" is the "green" so jump it right next door to the ground.

Source: It's what BFL ships with multiple singles, and that's the pin they jump, using one now.

Are you sure? Also connect it to next to left or right? Can you post a photo? (for double checking the correct place)

[yurtesen]

Hi,

I have this power supply and no mobo modular cable. But I have PCIe cables so I can run miners with it once I get it going. All I see is:
https://www.evga.com/articles/00755/images/univ/1k_Mod_Face_lrg.jpg
Can anybody tell which pins in the photo above should be shorted to get it going?

Thanks,

The bottom of the two under the "M" is the "green" so jump it right next door to the ground.

Source: It's what BFL ships with multiple singles, and that's the pin they jump, using one now.

Thanks!!! It is working!!!

[ssateneth]

Pin layout:
http://lmgtfy.com/?q=atx+24+pin+psu+pin+layout&l=1

Or how to manually turn on a PSU:
http://lmgtfy.com/?q=how+to+manually+turn+on+a+psu&l=1

He doesn't have the modular cable, and the pins aren't color coded, and the connector on the power supply is nonstandard. The quoted post is useless. l2read OP

[1l1l11ll1l]

Hi,

I have this power supply and no mobo modular cable. But I have PCIe cables so I can run miners with it once I get it going. All I see is:
https://www.evga.com/articles/00755/images/univ/1k_Mod_Face_lrg.jpg
Can anybody tell which pins in the photo above should be shorted to get it going?

Thanks,

The bottom of the two under the "M" is the "green" so jump it right next door to the ground.

Source: It's what BFL ships with multiple singles, and that's the pin they jump, using one now.

Thanks!!! It is working!!!

Glad to hear! Yeah, it was weird how the EVGA isn't a standard layout, but all is good once you know where to stick it! lol